Dual Sport Saddle

* Read *

Leave it to the innovators at Corbin to build a seat as versatile as the four-stroke thumper itself. Our Dual Sport design combines the functionality of a motocross seat with the comfort of Corbin's ergonomic design. Works great for dirt riding, trail riding, dual sport riding, or for your Super Motard setup. Naturally, the styling is all Corbin with a variety of custom options included.

Like all Corbin designs, we start by crafting a seat using our high-density Comfort Cell foam. Comfort Cell retains resiliency and doesn't crush down like the stock foam so we can build a lower seating platform. This gives you better ground reach and a lower center of gravity. For the off-road enthusiast we were sure to leave enough nose to allow you to slide up the tank and get through the corners faster. Or slide back to skim the front end over the whoops.

Now let's say you're on a Dual Sport ride and you've just finished taming some intense terrain... you have some paved miles ahead to catch your breath. Slide towards the rear of the seat and you'll find a wider sculpted bucket shape. This area of the seat gives you more square inches of body contact and the firm support you need for amazing comfort. By the time you hit the next leg of rough stuff you'll be well rested and ready for more.

As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Strangely enough, this is true for most adults (I'm not making this up!) Your stock seat at its widest point is 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is a full 9.5" and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure. If you consider actual seating surface, the Corbin model gives you almost 300% more body contact! Long story short, greater riding comfort!

On the top, we cover it with only the highest grade of weather resistant materials for durability and long life. To add a bit of flair, we are now offering an embossed material in a variety of colors that gives the look of Carbon Fiber. The one shown on this page used our Blue Carbon-Fiber vinyl and we also offer black, silver (shown in side panels) and green to match your KLX. The traditional Corbin tag has been replaced with a tasteful Corbin logo stitched right into the contrasting side panel. Installation is simple and just like stock.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose-built hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. It provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose-built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story, just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is its ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle, which reduces fatigue. In a nutshell: more comfort for a longer ride! Click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology, which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, click the button for more information.

VISUAL 3D CONFIGURATOR

Interactive Design Tool

#S-DRZ-400-S Dual Sport Saddle

Design It

Explore colors, materials and design options in our interactive visual design tool. Experiment, share your creation or add the finished design to your shopping cart.

BUILT TO YOUR SPEC

Select Materials Below

#S-DRZ-400-S Dual Sport Saddle $543

Choose Materials and Finishing Details

Seating Material Leather Recommended Black leather Black vinyl Asphalt vinyl Aspen leather Black Alligator vinyl Black Basketweave vinyl Black Carbon-Fiber leather Black Carbon-Fiber vinyl Black Grabber vinyl Black Ostrich vinyl Black Permacool vinyl Black Polaris vinyl Black Snake leather Blue Carbon-Fiber vinyl Blue Metalflake Bomber Jacket (Brown) Bomber Jacket (Whiskey) Brushed Aluminum Brushed Aluminum - Bronze Brushed Aluminum - DARK Burgundy Metalflake Burgundy vinyl Camo vinyl Carbonium Charcoal Alcantara Charcoal Gray vinyl Charcoal Metalflake Chocolate Brown leather Classic Black Weave Candy Red vinyl Cognac vinyl Crimson (Pecan) vinyl Dark Tan (gold) vinyl Emerald Green vinyl Espresso Alcantara Forest Green vinyl Ghost Gray vinyl Gold Metalflake Goldenrod vinyl Gray Alcantara Gray Bomber Jacket Gray leather Gray Partners vinyl Gunmetal Vinyl Harley Blue vinyl Indian Brown 2017 Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Lime Green vinyl Matte Black Night Blue Alcantara Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl Pink vinyl Purple vinyl R-80 Red vinyl Raspberry vinyl Red Bomber Jacket leather Red Carbon-Fiber vinyl Red Natural Leather Royal Blue vinyl Sage Green vinyl Scout Brown leather Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Bomber Jacket Smoke Gray vinyl Tan Bomber Jacket Tan leather Tan Alcantara Taupe vinyl Teal vinyl Tomato Red vinyl Trexx Black vinyl Trexx Gear vinyl Whiskey Metalflake White vinyl Yellow vinyl Yellow Carbon-Fiber vinyl

Side Material Black Asphalt vinyl Aspen leather Black Alligator vinyl Black Basketweave vinyl Black Carbon-Fiber leather Black Carbon-Fiber vinyl Black Grabber vinyl Black Ostrich vinyl Black Permacool vinyl Black Polaris vinyl Black Snake leather Blue Carbon-Fiber vinyl Blue Metalflake Bomber Jacket (Brown) Bomber Jacket (Whiskey) Brushed Aluminum Brushed Aluminum - Bronze Brushed Aluminum - DARK Burgundy Metalflake Burgundy vinyl Camo vinyl Carbonium Charcoal Alcantara Charcoal Gray vinyl Charcoal Metalflake Chocolate Brown leather Classic Black Weave Candy Red vinyl Cognac vinyl Crimson (Pecan) vinyl Dark Tan (gold) vinyl Emerald Green vinyl Espresso Alcantara Fucshia Metalflake Forest Green vinyl Ghost Gray vinyl Gold Metalflake Goldenrod vinyl Gray Alcantara Gray Bomber Jacket Gray leather Gray Partners vinyl Gunmetal Vinyl Harley Blue vinyl Indian Brown 2017 Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Lime Green vinyl Matte Black Night Blue Alcantara Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl Pink vinyl Purple vinyl R-80 Red vinyl Raspberry vinyl Red Bomber Jacket leather Red Carbon-Fiber vinyl Red Natural Leather Royal Blue vinyl Sage Green vinyl Scout Brown leather Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Bomber Jacket Smoke Gray vinyl Tan Bomber Jacket Tan leather Tan Alcantara Taupe vinyl Teal vinyl Tomato Red vinyl Trexx Black vinyl Trexx Gear vinyl Whiskey Metalflake White vinyl Yellow vinyl Yellow Carbon-Fiber vinyl

Assembly Stitching Color Info Coordinate (blend in) Stitching Black Stitching Blue Stitching Burgundy Stitching Champagne Stitching Copper Stitching Gold Stitching Green Stitching Light Silver Stitching Medium Silver Stitching Orange Stitching Pink Stitching Purple Stitching Red Stitching Teal Stitching Yellow Stitching Heavy White Stitching Heavy Natural Stitching Heavy Black Stitching Heavy Red Stitching

Logo Style View Samples Standard Corbin Logo BMW Corbin Large BMW Corbin Small Gold Wing Corbin Indian Feather Corbin Italian Corbin Large Italian Corbin, Small Triumph Corbin Logo USA Flag Corbin Corbin USA Corbin Red White & Blue, Large Corbin Red White & Blue, Small Canadian Flag Corbin Japan Flag Corbin Union Jack Corbin German Flag Corbin Diablo Corbin Diablo Red, White & Blue Scooter Corbin Spyder Corbin

Stitch Color for Corbin Logo Black Blue Burgundy Champagne Copper Gold Green Light Silver Medium Silver Orange Pink Purple Red Teal Yellow

Add Selected to Cart

Select each product you would like added to your cart. Be sure to choose any applicable cover options before selecting “Add Selected to Cart.”

View Material Samples | International Ordering | Cover Glossary

Concerned about how a material will look? We will gladly send samples at no charge. Visit our materials page and use the chatbot to place your request. Limitations apply.

×

International Ordering

All orders outside the USA

Whenever possible we will pass your order along to the Corbin distributor best suited to fulfill your order. Please remember pricing given on this page is US pricing FOB Hollister, CA. This does not take into account taxes, duties, shipping or other charges applicable to getting product into any other country. As such you will see higher pricing in your area.

Corbin works closely with a variety of distributors around the world to coordinate export shipments that minimize landed costs. These distributors are experienced in the product line and are up to date on the latest styles and fitments. They will help make your Corbin experience more enjoyable. In the event a suitable distributor is not available in your country, we will process your order directly.

Canadian Customers: Riders and Dealers are now able to go “Straight to the Source” for Corbin products. Please contact one of our staff if you have any questions on how to proceed. 800-538-7035 or use our General Mailbox to send us a note.

×

Saddle Material Options

The colors on this page are an approximation of the actual material. Please remember computer monitors vary greatly. If you are concerned about an exact color, please contact us for a material sample.

Click material thumbnail to view larger. Image enlarged to show grain & detail

Leather Options

Black Leather We adopted this particular leather (called "Mercedes") back in 2003. Supple, yet extremely durable and colorfast. A clean and classic, traditional look. Natural texture.

Carbon-Fiber leather, Black Genuine leather material with a nylon weave bonded to the outter surface to provide the look of Carbon Fiber. Provides excellent friction for sport riding and a look to match.

'Snake' leather, Black Specially treated cowhide resembles snakeskin. Extremely durable and colorfast. Provides an interesting texture in accent areas. Not applicable for side panels or welts.

Smoke Bomber Jacket leather Dark grays with a very soft touch and distressed look. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture just like the above but darker. There is a lot of variation in this material from hide to hide.

CLASSIC leather, Black This genuine leather has an embossed weave look similar to that used as an accent on some H-D models. Great to coordinate with Roadking leather saddlebags. NOTE: This material is not a visual match to our Basketweave vinyl and is NOT recommended for welts.

Gray smooth leather A nice neutral gray color perfect for seating or accent areas. Smooth natural texture finish provides an excellent ride. Lighter in color than Gray Partners shown below. May 2014: We have a new supply of this material and it may not match the older version.

Grey Bomber Jacket leather Predominantly dark grey with light grey mottling. Has a soft touch and distressed look. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture just like the above. There is a lot of variation in this material from hide to hide.

Bright Red leather A natural grain leather material that is Bright Red in color. Perfect for seating or accent panels for just a touch of color. A smooth, natural texture. Great for our Corvette styled couches and Corbin Bar Stools!

Red Bomber Jacket leather Burgundy and Red with a very soft touch and distressed look. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture just like the above. There is a lot of variation in this material from hide to hide.

Navy Blue leather Just what it sounds like... a regular leather material that is Navy Blue in color. Perfect for seating or accent panels for just a touch of color. Comes in a smooth, natural texture.

Chocolate Brown leather A deep, rich dark brown leather that lends a warm tone to your saddle. Great in seating areas for a luxurious ride that breathes with your body. Natural smooth texture. May 2014: We have a new supply of this material and it may not match the older version.

Bomber Jacket leather: Warm brown with a very soft touch and distressed look. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture. Beautiful material!

Whiskey Bomber Jacket leather: Lighter than our traditional Bomber Jacket with redish-orange highlights in the distressed areas. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture. Beautiful material that coordinates well with HD's Whiskey Neat paint.

Aspen leather: Very luxurious touch with a warm, weathered (but not distressed) look. Another material specially made for Corbin saddles that is weather and UV resistant. Natural grain that shows color variance, a beautiful material!

Scout Brown leather: Rich, deep brown with a slight red hue. This natural grain leather is a good match to the color used on the stock seat of the Indian Scout Bobber in 2018. Durable, UV resistant and a nice feel.

Indian Brown 2017 This leather is a good match to the leather saddlebags and tank panel on the 2017 Indian Chief models. Not perfect, but really close and an excellent quality leather.

Tan Bomber Jacket leather Tan and Sand colors with a very soft touch and distressed look. Specially made for Corbin in automotive quality that is weather and UV resistant. Comes in a standard natural texture just like the above. There is a lot of variation in this material from hide to hide.

Tan leather If you want a warm tone seat, but don't want to worry about cleaning it all the time, Tan leather is good choice. Comes in a standard natural texture. May 2014: We have a new supply of this material and it may not match the older version.

Synthetic Options

Black vinyl Similar in texture and color to our standard black leather. We use this in the side panels instead of leather as it supports the foam shape and stays looking sharp longer.

Permacool Black vinyl A specially treated Black vinyl material that reflects infrared heat in order to provide a surface that is cooler to the touch after sitting in the sun. Reduces surface temperature by up to 26° F. Features a light, natural looking grain.

Black Basketweave If you were riding sportbikes in the 90s, then you're probably familiar with this classic material. Nearly all Corbin sportbike seats were running basketweave seating. Good seating grip, rides cool and extremely durable. NOTE: This material is not a visual match to our Classic leather.

Matte Black vinyl Very fine texture and deep color. Like the name implies, this vinyl has a matte surface rather than a semi-glossy surface like most materials. Gives a very clean look.

Asphalt Vinyl An interesting rough texture pattern that gives good traction and visually a nice contrast. We partner this with Carbon-Fiber seating a lot. Available only in black (just like real asphalt).

Trexx Black Nice fine texture and has a glossy appearance that makes a nice accent. Marine grade material really holds up to the elements.

Carbon-Fiber Vinyl, Black An embossed vinyl material used in the side panels to coordinate with our Carbon-Fiber leather seating. Also great for off-road bikes where leather seating isn't recommended.

Polaris Black A very nice material with a perforated look and excellent feel. This material is very durable and weather resistant (despite the perforated look) and provides a nice bit of contrast visually.

Carbonium An embossed vinyl material used for a high-tech, race look. Very shiny with a more aggressive pattern than our standard Carbon-Fiber look. Works great on Sportbikes and Dual Sports.

Black Alligator An embossed vinyl material designed to provide the look of Alligator hide. This also makes a very nice accent if you're looking for a little custom touch for the sides or tail of your seat.

Black Ostrich An embossed vinyl material designed to provide the look of Ostrich hide with a non-glossy sheen. This also makes a very nice accent if you're looking for a little touch of something for the sides or tail of your seat.

Black Grabber BH1 An embossed vinyl material used for a grippier seating surface on dual sport bikes and quads. This also makes a very nice accent if you're looking for a little subtle touch for the sides or tail of your seat.

Metal Flake Vinyl, Charcoal This is exactly what it sounds like, a vinyl with a sparkling metal flake embedded. Works perfect as an accent on your new seat.

Charcoal Alcantara Alcantara is a well-known synthetic suede material. We prefer the Charcoal rather than Black as it offers a lot of depth in appearance. We use the Alcantara EXO which has a waterproof membrane and is rated for marine and motorcycle use.

Charcoal Gray vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Pigeon Gray vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Gunmetal vinyl If you want a warm tone gray, this is the material for you. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in. Excellent as a welt or accent panel too.

Gray Partners vinyl If you want a 'one-color' look on your seat, this is the material to use along with Gray Partners Leather in the seating area. Otherwise can be used as an accent in any seat area.

Gray Alcantara Alcantara is a well-known synthetic suede material. Alcantara Gray is a nice medium warm tone material that makes an excellent trim. We use the Alcantara EXO which has a waterproof membrane and is rated for marine and motorcycle use.

Trexx Gear Warm toned charcoal color almost like titanium. Nice fine texture and has a glossy appearance when the light hits it. Marine grade material really holds up to the elements.

Smoke Gray vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Carbon-Fiber vinyl, Silver Excellent for off road products or high wear areas in your seat. Embossed vinyl material provides a sporty look and works great in any seat area. This material is not a color match to Silver CF leather.

Brushed Aluminum This is a really neat material that lives up to its name. Appears medium silver in color with shiny reflective highlights in light and a brushed appearance. Makes a great contrasting welt.

Brushed Aluminum - Dark Like our standard brushed aluminum with a darker tone... As if a smoke tint were added to brushed aluminum. Appears medium silver in highlights and charcoal in shadows. Makes a great contrasting welt.

Ghost Gray vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

White vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Espresso Alcantara Alcantara is a well-known synthetic suede material. Espresso is rich, deep brown in the sun and nearly black indoors. We use the Alcantara EXO, which has a waterproof membrane and is rated for marine and motorcycle use.

Otter Brown vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Congac vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Crimson (Pecan) Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Dark Tan (Gold) Vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Tan Alcantara Alcantara is a well-known synthetic suede material. This one has a nice, soft, warm tone in a medium Tan shade. We use the Alcantara EXO, which has a waterproof membrane and is rated for marine and motorcycle use.

Goldenrod vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Metal Flake Vinyl, Gold This is exactly what it sounds like, a vinyl with a sparkling metal flake embedded. Works perfect as an accent on your new seat.

Camo Vinyl "Hidden Creek" pattern camo vinyl has a very nice grippy surface that makes if a very good choice for Dual Sports, Quads and the like. Very water and UV resistant and durable.

Yellow vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Carbon-Fiber vinyl, Yellow An embossed texture that gives the look of carbon-fiber for a sporty look. Use anywhere on a saddle where you want a splash of color or more traction. Great for off road products!

Taupe vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Oxblood vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Burgundy vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Metal Flake Vinyl, Burgundy This is exactly what it sounds like, a vinyl with a sparkling metal flake embedded. Works perfect as an accent on your new seat.

R-80 Red vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Candy Red vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Tomato Red vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in. This is the closest in color to Ducati red paint.

Ninja Red vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Carbon-Fiber vinyl, Red Vinyl materials are a better choice for high wear areas and off road products. This embossed vinyl provides a nice Carbon texture for a sporty accent. This material is not a color match for Carbon-Fiber leather.

Metal Flake Vinyl, Whiskey This is exactly what it sounds like, a vinyl with a sparkling metal flake embedded. Works perfect as an accent on your new seat. Predominantly orange base with gold flake.

Orange vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

KTM Orange vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Night Blue Alcantara Alcantara is a well-known synthetic suede material. Night Blue is a rich Navy Blue in natural light and near black indoors. We use the Alcantara EXO which has a waterproof membrane and is rated for marine and motorcycle use.

Interceptor Blue (Navy) Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Harley Blue vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Royal Blue vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in. Not a color match to Royal Blue leather.

Carbon-Fiber vinyl, Blue An embossed vinyl material that gives the look of Carbon-Fiber. Use this material for a sporty look on our offroad seat models. This material is not a match in color to our Blue Carbon-Fiber leather, but coordinates nicely.

Metal Flake Vinyl, Blue This is exactly what it sounds like, a vinyl with a sparkling metal flake embedded. Works perfect as an accent on your new seat.

Purple vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Lavender vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Sky Blue vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Teal vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Forest Green vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Sage Green vinyl This is a great coordination if you've got an offroad bike in Olive Drab or similar scheme. Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Emerald Green vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in.

Lime Green vinyl Colored vinyl is often used as a color coordinating welt or as an accent color in a seat. Vinyl is ideal for high stress areas like side panels since it doesn't show marks as it breaks in. This particular color is great on Kawasaki ZXs and Ninjas.

Stingray Leather

Stingray leather, Black This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

Stingray leather, Burgundy This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

Stingray leather, Brown This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

Stingray leather, Navy Blue This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

Stingray leather, Dark Green This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

Stingray leather, Red This is the genuine article... real, honest to goodness Stingray hide! Stingray is quite expensive and is the only optional material that will add to the price of your seat. It is very thick and won't work in all seat models so please contact one of our tech reps for pricing and availability on the seat model of your choice.

×

Measurements:	Seating: 9.5" wide X 29" long Approx seat height: 33.5"
Installation:	Corbin's saddle installs on your bike like stock with two tabs in the front and rear hold down brackets. Come's completely pre-assembled and ready to mount on your bike.
	Corbin's saddle DOES work with the Suzuki OEM accessory rear rack. The rear mounting arms need to be slightly spread by hand when fitting the seat. It's snug, but not much trouble.

Testimonials:	The seat draws an enormous amount of interest. Thanks for everything to you and the entire crew at Corbin, and I really hope you enjoy the pictures. -Mak Happy beyond description
Comments?	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders? Send them via THIS FORM.
Submit Photos:	Showcase your bike on Corbin.com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM!
General Contacts	California Factory: Corbin Saddles 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Florida Showroom: Corbin Saddles 1433 North US Highway 1 Ormond Beach, FL 32174 800-223-4332 Email: General Mailbox

PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.

MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.

CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.

SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read

EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.