Classic solo is designed to provide maximum rider comfort combined with a nostalgic look appropriate to the Rocker. Allows use of our removable rider's backrest for 13 inches of vertical back support (seat & backrest combined). Our sculpted seating position gives maximized body contact and provides touring quality support. Neutralized seat platform offers an easier reach to the ground and a more ergonomic position on the bike.
Corbin's optional removable rider backrest is simple to install and adjusts easily to your riding posture. Slide the backrest shaft into the internal hardware of the Corbin Solo and lock it in place with a single bolt. You can then set the backrest position to your preferred angle and lock it in place with the easily accessible adjustment screw... no need to remove the saddle to accomplish this. Choose from a variety of backrest styles to suit your taste. We recommend the #02-S Ovalbac (shown) for best combination of looks and support.
Saddle is built up with Corbin's exclusive Comfort Cell foam material for a firm supportive bucket that lasts. Built nearly twice as firm as the stock foam material so your body doesn't sink through the foam and create hot spots. Bucket design spreads weight evenly to support your body from the sides and eliminate centralized pressure. Comfort Cell also breaks in over over the miles to adapt to your body and provide a custom fit to your profile.
Classic Solo saddle is tastefully designed to fit perfect to the tank and chassis for a very clean look. Ergonomic shape provides a clean appearance with a flowing line and integrated skirts to conceal the installation points. Built on our Fibertech base material that provides the structural strength for the integrated backrest system and to support the carefully designed foam shape.
NOTE: Because of the added structural strength required for the backrest support system, we include a set of hardened steel bolts and lock washers for saddle installation. Do not reuse the oem hardware when installing the Corbin solo saddle!
On the outside, Corbin's Classic solo uses genuine leather in the seating panels for a luxurious perch that breathes with your body. On the model shown here we've used our standard natural grain leather seating with black faux-ostrich center trim, natural black sides and Asphalt skirts for added contrast. If you prefer something a bit flashier, we also offer grey faux-snake center trim or plain black to keep it subtle. For a clean appearance from the rear, we include a molded ABS cover under the seat with a ribbed design that coordinates nicely.
Leather seating will break in along with the foam shape for a personalized fit. Be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. With proper care, your seat will age gracefully developing a unique character and will be your riding buddy for years.
If you would like to add a bit of storage to your Rocker, check out the Corbin Glovebox. Bolting onto your #02-S Corbin backrest in place of a finishing plate to provide convenient locking storage. Sized just ride to keep all your essentials like cell phone, maps, water bottles and spare gloves. Available in unfinished ABS (black) or prepainted gloss black for a little extra. Comes fully lined with a locking door to secure your gear. For complete info, just check out our Accessories section.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Classic Solo seating: 14" wide x 13" long Back support: 4" w/o backrest, 13" with #02-S backrest Approx. Seat height: 24.5"
Corbin Classic Solo saddle has been redesigned to work with Harley-Davidson saddlebags installed.
Installation Instructions: Page 1 Installation: Corbin's Classic Solo mounts easily to your bike very much like stock. Slide the saddle into place nose first securing the mounting tongue and lower onto the chassis. Secure with included bolts and washers under the decorative seat skirt.
Due to the added stress of the rider backrest system, we have included a set of hardened steel bolts to replace the stock hardware used for seat installation. To assure your safety, use ONLY the included hardware when installing the Corbin solo saddle.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...Most rides require up to eight hours in the saddle. You make a great seat! After a year and a half, it looks like new. I have recommended your product to riding buddies. A very satisfied customer. -Mark L.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.