Standard Backrest: Gunfighter model
Corbin's Gunfighter model is designed specially for a low profile and slick look while still providing excellent back support. This model is comparable to the Ovalbac #02-G in size and shape. We recommend either for use in Gunfighter saddles and the smaller Gunfighter & Lady models. Naturally it works in all Corbin seat models that accept a removable rest. Like all Corbin backrest models, the Gunfighter model is fully adjustable to provide a tailored fit to rider's posture.
For seats that take two backrests, you can use this backrest in the front or in the rear. Use one backrest transferred front to back as needed or order two for full time use. Naturally you can use them in conjunction with our other backrest models (like the #297-B) if your passenger wants a bit more support. The slim line of this design, when used as a rider's rest, assures that your backrest won't interfere with your passengers legs.
Our Gunfighter backrest is build up with the same materials that have made Corbin the first name in Motorcycle saddles. Have your backrest covered to match your seat with a range of leather and color options.
Video instructions: Click the pic and Breanna will walk you through the installation and adjustment procedure for your Corbin backrest system. Applies to all models of Corbin backrest.
For seats that take two backrests, you can use this backrest in the front or in the rear. Use one backrest transferred front to back as needed or order two for full time use. Naturally you can use them in conjunction with our other backrest models (like the #297-B) if your passenger wants a bit more support. The slim line of this design, when used as a rider's rest, assures that your backrest won't interfere with your passengers legs.
Our Gunfighter backrest is build up with the same materials that have made Corbin the first name in Motorcycle saddles. Have your backrest covered to match your seat with a range of leather and color options.
Video instructions: Click the pic and Breanna will walk you through the installation and adjustment procedure for your Corbin backrest system. Applies to all models of Corbin backrest.
For Part Numbers, Pricing and Options, please click on the ORDER tab.
|
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
|
|
|
FIBERTECH™ BASEPAN: A purpose-built hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. It provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click the button at left to learn more... |
|
|
|
|
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose-built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story, just click the button. |
|
|
|
|
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is its ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle, which reduces fatigue. In a nutshell: more comfort for a longer ride! Click the button at left for an animation that shows how it works. |
|
|
|
|
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology, which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, click the button for more information. |
|
|
|
|
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support a personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating, click away. |
|
|
|
VISUAL 3D CONFIGURATOR
#GB
Gunfighter model backrest
Explore colors, materials and design options in our interactive visual design tool. Experiment, share your creation or add the finished design to your shopping cart.
BUILT TO YOUR SPEC
|
|
Cover Glossary
Concerned about how a material will look? We will gladly send samples at no charge. Visit our materials page and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you! Perfect for all your leather goods.
$25
Measurements: |
Face: 8" wide x 8" tall |
| |
Installation: |
Corbin Adjustable Backrests |
| |
 |
Simple to install... Our plated steel backrest shaft slides into a special receptacle built into (or bolted into) the Corbin saddle. In most cases, the backrest locks in with a single safety screw under the seat. Backrest angle adjustment is simple and does NOT require removal of the backrest. A single set-screw handles it all. |
| |
|
#GB does not work with the Corbin Glovebox. |
| |
|
This model is upholstered on the rear and therefore does not have a rear finishing plate. |
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
| Testimonials: |
I love this seat. I've got 20,000 miles on it now in the last two years, and it's still going. -Tom J. |
||||||
|
|
|||||||
| Comments? | Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders? Send them via THIS FORM. | ||||||
|
|
|||||||
| Submit Photos: | Showcase your bike on Corbin.com! Use this form to upload photos for possible inclusion on our website. Ready, set... LET'S SEE 'EM! | ||||||
|
|
|||||||
| General Contacts |
|
||||||
| PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you. |
|
|
 MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount. |
|
|
| CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges. |
|
|
| SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA). |
|
|
|
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
A note about paint color matching, Please Read |
|
|
| EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges. |