The WALL Saddle
2018-2026 Harley-Davidson Sport Glide, Low Rider & Low Rider S / ST
We call this newest incarnation of the classic Corbin fastback saddle "The Wall" because of the impressive vertical back support brought about by the raised tail section. Part of a series of seats with a taller and more vertical back area that would hold the rider in position more aggressively. Perhaps handy for stunt riders, but we've found this works extremely well for hot rodded bikes and cafe racers where a less reclined posture is desired.
Up front, the ergonomically designed platform increases the area of body contact to disperse rider weight evenly and eliminate hot spots. Dished in the center to eliminate pressure on the tail bone. At the nose of the saddle we sculpt it narrow to provide for good ground reach. This model sits further back than the stock seat and more into the sweet spot on the bike.
Wall saddle is available in a Standard or Close version for riders of varying stature. Our standard model seats you in the sweet spot on the bike for a more integrated feel. Corbin's Close version provides seating closer to the bars with a lower seat height for riders who prefer and easier reach.
For added support, the Wall saddle accepts an optional Corbin removable rider's rest. The Corbin backrest is supported by internal hardware so there are no brackets to clutter up the look of your bike. Backrests easily adjust to your riding posture and lock in with a single set screw. In the images above, we used our #BR backrest to create a total of 15 inches of vertical back support!
As far as passengers are concerned, the tail of the Wall saddle is padded and upholstered to provide for short trips. Although this is built with the same quality foam material as the rider's area, the shaping is designed primarily for looks and rider back support. When taking a passenger make sure you tell them to hold on tight!
As always, our exclusive Comfort Cell® foam provides resilient comfort and a trim seating profile. High density foam provides a long lasting ride and plenty of support. The entire saddle touches your Harley ONLY with rubber bumpers to protect your paint job. Provides a perfect fit and contours the crown and profile of the fender.
Includes genuine leather seating panels in your choice of colors and styles for a truly distinctive touch. Leather seating is best because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Leather is also extremely durable for years of enjoyment. We now offer two distinct cover patterns. Shown above:
Wall saddle also offers the option of electric heated seating to add a touch of luxury on those chilly morning rides. Heater is operated with a switch located on the saddle and once engaged, the saddle will heat up and maintain temperature automatically. All components are built inside the saddle, you only have to integrate the included pigtail with your bike's wiring. Note: Only the front seating area is heated on this model, not the tail section.
Saddle installs on your bike using a tongue in the front and a single bolt into your fender at the rear. For a very clean and simple, tool free installation, use one of our machined stainless steel thumbscrews at the rear. Available in a variety of sizes to suit multiple needs. The seat install location on your Softail uses a 1/4" x 20 thread, so the appropriate thumbscrew is #ACST-20.
The finest and most comfortable motorcycle saddles available. Manufactured with pride in the USA.
Up front, the ergonomically designed platform increases the area of body contact to disperse rider weight evenly and eliminate hot spots. Dished in the center to eliminate pressure on the tail bone. At the nose of the saddle we sculpt it narrow to provide for good ground reach. This model sits further back than the stock seat and more into the sweet spot on the bike.
Wall saddle is available in a Standard or Close version for riders of varying stature. Our standard model seats you in the sweet spot on the bike for a more integrated feel. Corbin's Close version provides seating closer to the bars with a lower seat height for riders who prefer and easier reach.
For added support, the Wall saddle accepts an optional Corbin removable rider's rest. The Corbin backrest is supported by internal hardware so there are no brackets to clutter up the look of your bike. Backrests easily adjust to your riding posture and lock in with a single set screw. In the images above, we used our #BR backrest to create a total of 15 inches of vertical back support!
As far as passengers are concerned, the tail of the Wall saddle is padded and upholstered to provide for short trips. Although this is built with the same quality foam material as the rider's area, the shaping is designed primarily for looks and rider back support. When taking a passenger make sure you tell them to hold on tight!
As always, our exclusive Comfort Cell® foam provides resilient comfort and a trim seating profile. High density foam provides a long lasting ride and plenty of support. The entire saddle touches your Harley ONLY with rubber bumpers to protect your paint job. Provides a perfect fit and contours the crown and profile of the fender.
Includes genuine leather seating panels in your choice of colors and styles for a truly distinctive touch. Leather seating is best because it breathes with your body and will conform with the foam shape for a personalized fit after break in. Leather is also extremely durable for years of enjoyment. We now offer two distinct cover patterns. Shown above:
| CV COVER |
| Black Natural Leather seating, Charcoal Alcantara trim, Matte Black side panel, Matte Black tail, Candy Red welt, Heavy Red Assembly stitching and Silver Corbin Diablo logo. |
| CV DIAMOND COVER |
| Charcoal Alcantara seating, Black Natural Leather trim, Matte Black side panel, Matte Black tail, Heavy Red Diamond stitching, Heavy Red Assembly stitching and Silver Corbin Diablo logo. |
| DIAMOND COVER |
| Black Asphalt seating, Sky Blue side panel, Black Asphalt tail, Heavy White Diamond stitching, Heavy White Assembly stitching and Blue Corbin logo. |
| NOTE: If you would like to diminish (hide) the appearance of the assembly stitching, choose "Coordinate" on checkout and we will use a thinner thread that coordinates with the material being sewn so it blends in. |
Wall saddle also offers the option of electric heated seating to add a touch of luxury on those chilly morning rides. Heater is operated with a switch located on the saddle and once engaged, the saddle will heat up and maintain temperature automatically. All components are built inside the saddle, you only have to integrate the included pigtail with your bike's wiring. Note: Only the front seating area is heated on this model, not the tail section.
Saddle installs on your bike using a tongue in the front and a single bolt into your fender at the rear. For a very clean and simple, tool free installation, use one of our machined stainless steel thumbscrews at the rear. Available in a variety of sizes to suit multiple needs. The seat install location on your Softail uses a 1/4" x 20 thread, so the appropriate thumbscrew is #ACST-20.
The finest and most comfortable motorcycle saddles available. Manufactured with pride in the USA.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.