Corbin now offers a Dual Touring Saddle to provide maximum two-up comfort on the Deuce. This ergonomically developed saddle offers sculpted seating positions that disperse rider's weight over a greater area to improve long range comfort. Built up with our Comfort Cell® foam to provide a firm supportive ride that provides for day-long touring.
Corbin's Dual Touring saddle accepts two removable backrests for added touring support. Both backrests install easily with a single set-screw and are fully adjustable to provide a tailored fit to rider posture. To make it easier to mount your bike, we have engineered the internal hardware to allow the rider's backrest to fold forward on a spring loaded hinge. We offer six styles of removable backrest to suit your taste, each of them works perfect in the Deuce Dual Tour. Alternately, the Dual Tour will also work with the factory luggage rack and passenger pad instead of the Corbin rest in the rear.
We use leather in all of our saddles now to provide you with a perch that breathes with your body. Genuine leather will also conform to the saddle and break in along with the foam shape to give you a personalized fit upon break in. If you care for your leather properly, it will age gracefully and develop its own unique character (just like your leather jacket). We recommend using a quality leather conditioner like our Saddle Cream. It will extend the life of your saddle and help it resist moisture.
Dual Touring saddle is designed to provide a perfect fit to your Deuce for a totally custom look. We also offer chrome or black studs if you desire for a more nostalgic look. Our one-piece saddle installs with a nose tab in the front and a retractable seat tab in the rear to ease installation when used with the factory luggage rack.
Need a little bit more convenient storage but don't quite need a T-Bag? Take a look at this great glovebox option we now have for the #02-S Ovalbac backrests. This little beauty bolts on in place of the finishing plate and gives the perfect amount of locking storage for little essentials. We can easily pack in a couple bottles of water, a PDA, cell phone, spare gloves, maps and sunglasses with room to spare. You'll find this the most convenient and easy to use storage on your bike. Check out the Accessories tab for more information.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
CORBIN BACKREST SYSTEM:
The first and most versatile removable backrest system available
for motorcycles! Corbin's backrests provide added vertical back
support and long-range comfort. Supported by internal hardware
for a very clean look, the backrests adjust to the rider's profile
for a tailored fit and install or remove easily as desired.
A very popular option! Click the button for
additional information...
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Standard Ovalbac
Our most popular backrest is the perfect blend of form and function.
Nine inches of support.
$383.
*Learn More*
Standard Backrest
Similar to the Standard Ovalbac, but without the hole.
Available with chrome studs too.
$383.
*Learn More*
Ovalbac Edge
Edge Ovalbac designed to complement bikes with more angular lines.
Eight inches of support.
$383.
*Learn More*
Ovalbac Large
Like the Standard Ovalbac, but with more support.
10" H x 12.5" W contact area.
$383.
*Learn More*
Ovalbac Tee
Extra-large support cut away to provide clearance for the
passenger's legs. Thirteen inches tall.
$383.
*Learn More*
Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance
possible. Provides eight inches of support.
$383.
*Learn More*
Gunfighter
Often used as a rider's backrest in Gunfighter seat models.
Provides eight inches of vertical back support.
$383.
*Learn More*
Corbin Glovebox
Glovebox bolts to your Standard model backrest
(#297-SB & #02-SB) to provide four liters of locking storage.
$518.
*Learn More*
Measurements:
Rider Seating: 14" wide x 15" deep Passenger Seating: 13" wide x 11" deep
When installing this saddle on your Deuce with a Harley-Davidson Sissy Bar, installation can be tricky due to the limited space available. A little patience and the help of a friend will be required. To make installation easier, you may wish to run a 1/4 x 20 bolt up through the fender making a stud on top to mount the saddle to. Then simply install a nut on the stud.
Because the rubber bumpers are firm and not broken in yet, it may be difficult to slide saddle into place during the first installation. To overcome this, simply add a little lubricant (like WD-40) to the front four bumpers on the base of the seat... This will allow the seat to slide into place easier. Sometimes a firm tap forward on the nose of the saddle with the palm of your hand will help. This will only be required the first time your seat is installed.
This saddle fits Screaming Eagle models EXCEPT where the fuel injection module is greater than 1" tall.
About H-D sissy bars: The Corbin saddle will install with either the tall or short sissy bar on the bike, but we do NOT recommend using the short bar. Because of the increased passenger area, the short bar does not offer any support and is virtually hidden by the passenger seat (this also negates the ability to install a backrest pad). If you prefer to use the H-D sissy bar in the rear, these are the components that work best: Tall Sissy Bar upright: #51144-02 Small passenger pad: #51534-00
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...I am truly impressed with the quality of your product and highly recommend that all '08 TE Husqvarna owners toss that plank they call a stock seat. Thank you so much for making riding so pleasurable. -Matt H.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.