Part of Corbin's new modular seat system! We've created a two-piece system that allows you to mix and match components for your current riding needs. On this page you'll find our front saddle combined with an enhanced passenger seat that can easily be removed and replaced with a Corbin Smuggler trunk (available soon). Our unique mounting system allows all components to work with your stock seat key lock system for hassle free conversion and will even work with your stock seat components. Naturally both the front and rear seats have been ergonomically developed for better weight dispersion and long range comfort.
Our saddles offer you a more sculpted seating platform that conforms to your body and gives more square inches of body contact. Our exclusive high-density Comfort Cell foam allows us to build a highly supportive saddle without putting a bulky shape on your bike so it always looks good. The Corbin Wizard's are masters at combining form and function into a saddle that looks as nice as it rides. Our unique Fibertech basepan molds to every contour of the bodywork for a precision fit but rides on rubber bumpers to protect your paint job. Installation is simple with included bracket and our unique lock system.
Notice how the bucket shaping is designed to emulate the shape of your body. This gives excellent support for longer range. Our neutralized seating helps to curb sliding in the saddle which greatly reduces rider fatigue. Naturally we include your choice of color options for a look that can range from outrageous to stealthy. We've created a cover design and stitch pattern that coordinates with the FJR perfectly and adds to the visual appeal. Shown here we've used black leather seating panels with Asphalt vinyl side panels, but the whole range of leather and vinyl options are included at no additional charge.
Of course we engineered in a removable passenger backrest for added security. Corbin's passenger backrest adjusts to provide a tailored fit to your copilot's posture. Once installed, the backrest is easily adjusted with a single set screw accessed from the rear. Mounts into hardware concealed inside the saddle for a perfectly clean look. Notice how the Corbin Ovalbac backrest is shaped to fit the contour of your passenger's back to maximize comfort and support value. The oval shaping of this model also helps to keep your body cool by not trapping heat.
There's nothing quite like heated seating for those chilly morning rides. For an added bit of luxury, our new FJR saddles have this option. We incorporate a heater unit under the leather seating and a switch on the left side of the saddle (so you can turn it on without removing your hand from the throttle). Just flip the switch and the seat will warm up and maintain temperature automatically. Comes completely preinstalled in the saddle and you need only integrate the included pigtail to your fuse box. Because of the two piece design, front and back saddles have separate switches that run through a dual pigtail.
Need more options? If you're looking for something a bit flashier for that Ovalbac backrest, you have a choice of finishing plates. The standard plate is a leather look ABS model, but included is your choice of Carbon-Fiber look or primer (for custom painting). For a little extra, we can supply a chromed steel plate or prepainted gloss black. Need a little bit more convenient storage but don't want to install a trunk? Take a look at this great glovebox option we now have for the Ovalbac backrests. This little beauty bolts on in place of the finishing plate and gives the perfect amount of locking storage for little essentials like a couple bottles of water, a PDA, cell phone, spare gloves, maps and sunglasses with room to spare. You'll find this the most convenient and easy to use storage on your bike... click here for complete glovebox info.
Inside the saddle we use our exclusive Comfort Cell foam to provide a firm, resilient ride that gives you long lasting support. Foam density is an important factor in long range comfort and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in our manufacturing process. Combine this with over three and a half decades of design experience and you have what is commonly considered the World's Finest Motorcycle Seat. Comfort CellŪ foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come. Enjoy the ride!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
MODULAR SEAT SYSTEM: This component is part of our modular seat system. Engineered to work in a variety of configurations to provide maximum versatility. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. Click the button to see how it all works.
Measurements
Rider seating: 13" wide x 14.5" long Passenger: 11.5" wide x 10" long Approx seat height: 31.5"
Measurements:
Rider seating: 13" wide x 14.5" long Passenger: 11.5" wide x 10" long Approx seat height: 31.5"
Please note, if you will be using a trunk system on your bike, the Corbin backrest will not be needed.
Saddles install easily on your FJR with all hardware included (photo coming soon). Rear saddle or Smuggler trunk bolts down to the subframe and the front seat latches on your bike like stock. Corbin components will interchange and work with your stock seat components.
On this seat model, you will need to secure the backrest in place with the safety screw BEFORE the rear saddle is installed on the motorcycle.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#Y-FJR-13-F
Front saddle for Yamaha FJR 1300, no Heater
$289
#Y-FJR-13-F-E
Front saddle for Yamaha FJR 1300, w/ Heater
$459
#Y-FJR-13-R
Rear saddle for Yamaha FJR 1300, no Heater
$209
#Y-FJR-13-R-E
Rear saddle for Yamaha FJR 1300, w/ Heater
$369
Seating Panels
Side Panels
Welts
Stitching
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
