A comfort addition for your Zuma! We've taken the same developments that have made Corbin the number one choice for motorcycle seats worldwide and built them into a comfortable two-up seat for your Zuma 125. Our ergonomically designed seating platform fits the shape of your body for excellent weight distribution and support. This eliminates hot spots from pressure points created by the stock seat. Additionally, our high-density Comfort Cell® foam material gives firm support that doesn't break down as you ride. This equates to more time in the saddle with less wear and tear on you!
Designed to set you at a comfortable reach to the bars with room to slide forward or back as desired. We also taper the nose of the seat in closer to allow good leg clearance at stop signs. This gives you the best of both worlds since you can slide back into the wider area of the seat while cruising for maximum body support. Of course it operates just like stock and keeps the hinge action to provide access to the storage area. New weather stripping is included and comes already in place on your new seat. Please note that in order to improve the ergonomics of the seat, we do not have our basepan notched on the underside like the stock unit.
Built up with our exclusive Comfort Cell® foam material for firm support that lasts. Our seats feel firm when you first sit on them, but this is one of the factors that make Corbin saddles work so well. While you stock seat feels soft and comfy when you first sit on it, it quickly crushes down and leaves you sitting on the basepan. Comfort Cell® is designed to support your body in a sculpted bucket for comfort that lasts all day. Over time, your saddle will break in to take on your shape and provide a personalized fit to your body.
The ergonomic shaping of the saddle naturally makes a nice, flowing line on the bike. Also notice how well the Corbin basepan fits to the shape of the Zuma tail section for a perfect fit. In the Corbin R&D shop we look carefully at the lines of the bike and design the shape of our seat to fit in visually. This gives you an excellent blend of comfort AND style.
On the top, your new saddle includes genuine leather and a wide range of material and color options. Above we show: Black Carbon-Fiber leather seating, Matte Black side panels, Natural Black welts, Red stitching and Red Corbin Scooter logo.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider Seating: 13" wide x 14.5" long x 2" deep Passenger: 9.5" wide x 9.5" long
Corbin Dual Saddle installs easily in place of your OEM seat and works just like stock by securing to the factory hinge. Rear latch is included and comes preinstalled on the saddle.
There appears to be a rolling or mid-year change in the seat application for the Zuma 125. If your model has the bracket running side to side (left image), you need the earlier model saddle shown HERE. If your stock seat has the bracket running front to back (right image), this is the correct saddle for your bike.
In order to improve the ergonomics of the seat, the Corbin basepan is not "notched" on the bottom like the stock seat. This means most full face helmets will not fit in storage compartment.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
My seat arrived today. Thank you very much for your help. It fits perfectly. I'll give Corbin a glowing review to everyone I know and meet. Your service and product are outstanding. Again, thank you for expediting the arrival of my seat. -Scott Z.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.