Comfort and style together in one package is what made the Corbin name famous worldwide. Delivering a quality product constructed of the finest materials available has made Corbin the number one manufacturer of motorcycle saddles for over forty years! Our Gunfighter saddle for the Ninja is a perfect example of this combination of form and function.
Up front the seating area has been ergonomically designed to distribute body weight over a greater area. This provides longer-range support and eliminates hot spots. Neutralized seating platform helps to hold you body in place and curbs sliding in the saddle. This also helps to relieve rider fatigue by taking pressure off your wrists and knees. Our exclusive Comfort Cell foam material on the inside provides a firm, resilient ride that supports your body indefinitely. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body.
For a solo look, the Gunfighter tail section is shaped to emulate the lines of the bodywork with a fastback tail section. On the inside, the tail is padded and upholstered to provide for passenger capability. Although the shaping of the tail is designed for slick looks, the Comfort Cell foam still provides a good perch for your copilot on short to medium length trips.
Bucket shaping of the front seating area gives an unprecedented amount of body support. Notice how it curves up at the back to provide support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach. Smaller riders may prefer to slide forward and out of the bucket at stop signs for best ground reach.
Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the bodywork and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire seat rides on rubber bumpers to protect your paint job and mounts to your bike with the stock key lock system. Latch bracket comes pre-mounted on the saddle.
On the outside we use genuine leather seating for a luxurious ride that breathes with your body. Leather will break in along with the foam to support the personalized fit. You can order your saddle in plain black for a classic and subtle look, or order the Custom pattern shown above that includes: Black Faux-Alligator, Carbonium, Grey Faux-Snake & Black Asphalt at no extra charge. Click on the thumbnail to see how this special cover pattern is described.
Corbin's saddle mounts like stock with a tongue in the front and included latch bracket at the rear. Rear seat latch is adjustable to assure a perfect fit with your key lock system. When new, you may wish to put a washer between seat and bracket to ease locking on the bike. Remove these washers once the rubber bumpers have broken in a bit.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider seating: 13.5" wide x 13" long Rear area: 11" wide x 10" long Approx seat height: 31"
Installation:
Mounts easily with bracket preinstalled on the Corbin saddle that meshes with your stock key lock system. Simply slide the saddle into place nose first to engage the tongue and lower the rear into place. Push firmly on the passenger platform to latch and you're ready to hit the road.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...I am truly impressed with the quality of your product and highly recommend that all '08 TE Husqvarna owners toss that plank they call a stock seat. Thank you so much for making riding so pleasurable. -Matt H.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
On the outside we use genuine leather seating for a luxurious ride that breathes with your body. Leather will break in along with the foam to support the personalized fit. You can order your saddle in plain black for a classic and subtle look, or order the Custom pattern shown above that includes: Black Faux-Alligator, Carbonium, Grey Faux-Snake & Black Asphalt at no extra charge. Click on the thumbnail to see how this special cover pattern is described.
Corbin's saddle mounts like stock with a tongue in the front and included latch bracket at the rear. Rear seat latch is adjustable to assure a perfect fit with your key lock system. When new, you may wish to put a washer between seat and bracket to ease locking on the bike. Remove these washers once the rubber bumpers have broken in a bit. 
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount. 