Old School visual appeal blended with the Indian Scout styling and combined with Corbin's attention to aerodynamic design. This stunning fairing looks great while giving excellent wind protection so you can go out and rack up mileage on your Indian Scout. Subtle sculpting makes it beautiful to look at. Another example of form and function expertly combined in Corbin fashion.
We started with a shape familiar to the fairing designs you've seen on cruiser models before, but upgraded for better aerodynamics. Notice how the fairing's shape starts at the headlight and flows back to part the wind more gracefully. This transfers the highest pressure area back near the steering pin, which gives greater stability at speed. This shape also brings the slipstream "bubble" further back to get you out of the wind.
As the fairing is designed to slip through the wind, it creates less turbulence and buffeting, which gives you a quieter and smoother ride than the standard plexiglass windshield. Naturally, this stability and low-pressure slipstream help to relieve fatigue associated with long days on the highway. It also helps to lower wind noise, which adds to the comfort value. Of course, the streamlined shape looks perfect on your Indian Scout.
Constructed using multiple, thermoformed ABS skins, bonded together for a smooth, clean finish and durability. Topped off with a smoked windscreen for a beautiful piece ready to install right out of the box. If you are a taller rider or just prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one. Note, the 5" smoked windscreen is designed for the rider to look over the top while the taller windscreen is clear so you look through it.
If you're looking to keep the Rock rolling, we offer an audio kit upgrade for your Indian Scout fairing. Using your Bluetooth device as the source, you'll have 500 watts of power at your fingertips. The dash-mounted controller gives convenient access to most functions so you won't need to fumble with your cell phone-- something quite tricky with gloves on. Included with your kit is a pair of JL Audio 5.25" Coaxial speakers pre-mounted in the fairing.
If you get the audio kit at the same time as your fairing, it will come with everything already mounted and ready to go. You will just need to provide 12v switched power during your fairing installation (complete instructions included). Naturally, the amp and controller are marine grade and suitable for your motorcycle. The amp itself can power four speakers if you feel like adding another pair somewhere else on the bike. Likewise, it offers a USB interface though you will need an extension cable to use this function.
Corbin's fairing is available in primer, prepainted a single color or prepainted Two-Tone. If we don't have your bike's color already matched, we can match the color for you for a little extra. In order to match your paint, we will need to borrow a painted part from your Scout to do so.
Corbin's Touring fairing is simple to install with complete directions and all required brackets included. To assure a perfect look on your Indian Scout the brackets come painted black to coordinate with the bike and give a subtle appearance. Installation can be accomplished by an average weekend mechanic.
Electronics warranty is provided by the manufactures: Velex and JL Audio.
Corbin's Touring Fairing is designed to mount up easily to your stock Indian front end and works with the various handlebars that come on the different models. Simple installation with complete instructions and all required brackets included. Brackets are painted to blend in nicely on your Indian Scout.
The Corbin fairing was designed to work with the handlebars in the stock position. If you plan on changing handlebars on your bike, this may impact functionality to some degree.
It probably goes without saying, but if you order your fairing without the sound system, we will NOT cut out the area for the control box and speakers.
Includes your choice of 5" Smoked or 10" Clear windscreen.
Audio system is fully self contained within the fairing. You need only supply 12v power to the system with our included wiring pigtail.
Please note the Corbin fairing does not fit models with upside-down forks (101 Scout)
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
I love this seat. I've got 20,000 miles on it now in the last two years, and it's still going. -Tom J.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.