Total comfort and support for Honda's Adventure scooter. The ADV160 takes scooters in a new direction and Corbin's dual saddle is designed to compliment the lines while improving rider comfort.
Ergonomically designed seating platforms fit the shape of your body for excellent weight distribution and support. Additionally we've neutralized the seating to help to curb the tendency to slide in the saddle, which will reduce fatigue.
Designed to set you at a comfortable reach to the bars with room to slide forward when desired. We also taper the nose of the seat in closer to allow good leg clearance at stop signs. This gives you the best of both worlds since you can slide back into the expanded bucket of the seat while cruising for maximum body support and riding range.
Since the storage area can't really fit a full-face helmet anyway, we took the hump out of the basepan. This allowed more freedom to engineer a proper shape into the saddle that eliminates centralized pressure and hot spots. Naturally we include rubber weather stripping to keep the storage area sealed. Even without the bump in the basepan, there's still plenty of room for your travel essentials in the ADV160's storage bay!
Built up with our exclusive Comfort Cell foam material for firm support that lasts. While your stock seat feels soft and comfy when you first sit on it, it quickly crushes down and leaves you sitting on the basepan (ouch). Comfort Cell is designed to support your body in a sculpted bucket for comfort that lasts all day. Over time, your saddle will break in to take on your shape and provide a personalized fit to your body.
On the top, your new saddle includes genuine leather seating panels for a luxurious ride. We offer a wide range of styles and colors to create a custom look at no added charge. Shown above with Black Carbon-Fiber leather seating, Matte Black sides, White welt, Silver stitching and Silver Corbin logo. Leather gives you a surface that will breath with your body and conform along with the foam shape during break in. Be sure to care for your leather seat properly with a quality conditioner like our Saddle Cream. This will help it to remain weather resistant and age gracefully.
Corbin's dual saddle installs easily and latches with the OEM integrated key lock system. Latch hook comes preinstalled on the saddle while the front bolts directly to your stock hinge.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider seating: 14" wide x 17" long Rear area: 10.5" wide x 12" long
Installs like stock and integrates with the factory key lock. Simply install the Corbin saddle onto the factory hinge in place of the OEM seat.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
My experience with the Corbin process was all the neat stuff I'd been told and then some. I didn't get everyone's names who worked on my Kawasaki Z750S, but everyone involved did a spectacular job. I'm more than happy with the seat, the service and the people involved. -Brian W.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.
On the top, your new saddle includes genuine leather seating panels for a luxurious ride. We offer a wide range of styles and colors to create a custom look at no added charge. Shown above with Black Carbon-Fiber leather seating, Matte Black sides, White welt, Silver stitching and Silver Corbin logo. Leather gives you a surface that will breath with your body and conform along with the foam shape during break in. Be sure to care for your leather seat properly with a quality conditioner like our Saddle Cream. This will help it to remain weather resistant and age gracefully.
On the top, your new saddle includes genuine leather seating panels for a luxurious ride. We offer a wide range of styles and colors to create a custom look at no added charge. Shown above with Black Carbon-Fiber leather seating, Matte Black sides, White welt, Silver stitching and Silver Corbin logo. Leather gives you a surface that will breath with your body and conform along with the foam shape during break in. Be sure to care for your leather seat properly with a quality conditioner like our Saddle Cream. This will help it to remain weather resistant and age gracefully.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.