2024-2026 Road Glide & Street Glide | 2023 - 2026 CVO Road Glide & Street Glide
* Click or Tap to Activate Item *
Hollywood Solo saddle and companion passenger pillion give your bike a sleek, low profile while providing boulevard cruising comfort. Built up with our exclusive Comfort Cell® foam for a firm ride that is ergonomically sculpted for proper weight dispersion.
We start with a carefully engineered Fibertech basepan, specifically for the CVO, that provides a perfect fit along the tank, side covers and fender. As always, our basepan rides on rubber bumpers to protect your paint job. On top, we cast our Comfort Cell foam nearly twice as dense as the OEM foam so it remains resilient despite its low profile. Up front, the seating area is dished to eliminate hot spots and centralized pressure. Neutralized seating platforms curb the tendency to slide in the saddle.
For your passenger, we make a Hollywood style pillion pad that keeps a very clean look on your fender while providing a decent passenger perch. Made thin and ultra low for the cleanest possible lines while built up with the same high density foam for a surprisingly plush ride. Works with a variety of HD passenger backrest and sissy bar options for maximum versatility.
Hollywood Solo and pillion include a wide variety of material options for a truly luxurious ride and personalized look. With over 70 material options and your choice of stitch patterns and colors, the custom options are nearly limitless and included at no extra charge. Shown above we used the following materials for a coordinated and sporty look:
Charcoal Alcantara seating, Trexx Black side panels, Orange stitching in Xotic pattern and Orange Corbin logo.
We recommend leather or Alcantara in the seating area because it breathes with your body and will adapt with the foam shape for a personalized fit. Leather is extremely durable and works great for motorcycle saddles. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly you'll be enjoying your Corbin saddle for years!
This is the perfect setup to have a low, slammed look on your CVO. Notice how the shaping matches perfectly to the tank, dash and fender... this kind of fit is available only in a Corbin saddle.
Hollywood solo mounts with Corbin's key lock system. We include brackets that bolt up to your bagger and provide a stainless steel latch pin. Once brackets are in place, you install/remove the Hollywood Solo easily with a supplied key. Hollywood pillion in held in front by Corbin's solo and uses a stock mounting location at the rear. For a very clean installation, use one of our stainless steel thumbscrews #ACST-20 in this spot. Hollywood Solo saddle works with HD rear crashbar installed.
Rear mounting tab of Hollywood Pillion is available in chrome or Gloss Black powder-coat. Please specify your preference when ordering.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
VISUAL 3D CONFIGURATOR
Interactive Design Tool
#HD-23CVO-H
Hollywood Solo, HD Road Glide & Street Glide
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
FIT INFO
2023 - 2024
CVO Road Glide & CVO Street Glide
2024
Street Glide & Road Glide (not Limited)
IMPORTANT
This model does NOT fit 2023 - 2024 Road Glide Limited. You need THIS SADDLE instead.
Measurements:
Hollywood Solo Seating: 13.5" wide x 17" long Hollywood Pillion: 7.5" wide x 9" long
Corbin designed key mount system makes for simple on-off installation onto your stock chassis. Simply install the fender bracket as shown and the stainless steel latch pin to the tongue in the front and you're good to go. Two keys and complete instructions included.
If your motorcycle uses this passenger grabstrap setup, it must be removed before installing the Corbin saddle or it may damage your new seat. Each bracket is secured with a single 3/8 inch bolt.
With intricate stitch patterns like the ones used on this seat, we do not recommend leathers that have a large texture (ie Ostrich and Alligator).
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...the seat looks great! Nothing like real leather and a solid frame underneath. Nice leather work, and that shows right off. I may pick up a passenger rest before next summer, once I decide which style and whether I want the one with the storage compartment... -Joseph T.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.