The Young Guns saddle design gives your Bagger a low slammed look with plenty of comfort for you and a precision fit to your bike. Our high density Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile that looks awesome. The shape of the saddle follows the contours of your bike and molds along the crown and profile of the fender. The Young Guns tail section is padded and upholstered so it can take passengers for a short distance, but this model is designed primarily as a solo saddle.
In the front, we've built a seating platform that is concave in shape to fit the contour of your body and provide more square inches of body contact. Our seating sits you down into the bike into the sweet spot giving you a better feeling of control and allows for lower back support. This model provides over six inches of vertical back support! This gives you excellent comfort despite the low profile design. On top, we cover the saddle with genuine leather for a truly luxurious ride. Our V-Tail pattern on the tail section adds to the fast look of the saddle and integrates nicely with the vintage appeal of the Electra-Glide.
Harley-Davidson also offers a variety of luggage rack and passenger backrest options for your Bagger. Corbin's Young Gun saddle will work along with these options with the passenger pads available from Harley or with a coordinated pad of our own making. There are two different trunk sizes available (King Tour Pac shown) and a detachable sissy bar that all fit with this seat model. Naturally we make a coordinating backrest pad for all of these options.
Foam density is an important factor in long range comfort and we always say... "Firm is a good thing". Corbin uses a very unique formula of purpose built materials in the manufacturing process. Combine this with the years of design experience and you have the world's finest motorcycle seat. Comfort Cell® foam combined with our patented molding process deliver unmatched contoured support. Corbin saddles feel firm when you first ride on them, but will break in and adapt to your body and support you in comfort for years to come.
Corbin basepans ride on rubber bumpers to protect your paint job from scratching. Installation of the Young Guns saddle is simple and works on a new key lock system designed by Corbin.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
KEY LOCK INSTALLATION:
This saddle model uses a new mounting system designed by Corbin
to allow installation and removal with a simple key lock. Once
the included brackets are installed, the saddle can be removed
easily by simply inserting and turning the key.
Need a
demo?
Just click the button.
VISUAL 3D CONFIGURATOR
Interactive Design Tool
#HD-FLH-6-YG
Young Gun Saddle, 2006-2007 Electra-Glide
Explore colors, materials and design options in our interactive
visual design tool. Experiment, share your creation or add the
finished design to your shopping cart.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Rider Seating: Approx. 12.5" wide x 21" long Seat Height: Approx. 26.75"
Installation: Corbin's Young Gun saddle uses a new key lock system for installation. We include a bracket with stainless steel latch pin that integrates with a lock mechanism on the Corbin saddle.
Start by installing the supplied latch pin bracket by removing the torx bolt that is securing the rear gas tank bracket. Put the latch pin on top of the tank bracket while at the same time lining up the 1" x 1/2" metal block keeper into the small rectangle hole of the chassis. Once the bracket is in place, twist the keeper so the length of the keeper is opposite of the hole and anchors to the chassis with the beveled steps in the keeper. As you snug the allen bolt in, make sure it is well anchored. Once the keeper is in place, line up the rear hole of the bracket with the gas tank tab hole, chassis and resecure using the stock torx bolt. Tighten every thing up to 12 ft. lbs.
The seat installs by screwing the supplied latch pin and nylon cap into the rear thread nut of the rear fender. Slide the key way bracket on the seat into the latch pin on the fender and secure the front of the seat by lining the key lock at the front of the seat to the latch pin on the bracket. Push down on the nose of the seat until you hear TWO clicks.
NOTE: To ease installation until the rubber bumper on the basepan break in, it may be necessary to add a washer between the seatpan and latch bracket. This will make it easier to latch.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
I had a chance to plant my butt in a nice, comfortable seat and actually ride a few miles. I can't even begin to tell you the difference between this seat and the original seat. Many thanks for the prompt service and excellent seat! -Len W.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.