Corbin offers three models of trunkrests for use on your Harley-Davidson Tour-Pak. All are built up with our exclusive Comfort Cell foam for firm support and covered to match your Corbin saddle with genuine leather inserts and a host of color / material options.
Slim Trunkrest (#502-2) provides good passenger comfort with a wide, contoured contact patch while it keeps a clean profile on the bike. Built with High Density Comfort Cell foam material for firm support that lasts.
Designed to fit all model Tour-Paks and looks especially tough on the low profile Chopped Tour-Pak and even lower Razor-Pak. Our slim trunkpad installs easily by drilling the appropriate holes in your trunk lid (drilling template provided).
Ovalbac Trunkrest (#HD-503) gives your passenger generous body contact for more square inches of weight dispersion and long range touring comfort. Contoured contact area provides more support and less hot spots.
Works equally well on all three Tour-Pak models and especially the low profile models. Back of our pad is finished with an ABS finishing plate in a leather like texture to keep a very clean look on your bike. As shown above we can alternately provide a smooth rear finish plate so it can be color matched to your trunk / bike by your local painter.
Trunk Armrest (#HD-PAK-ARM) Our large touring armrest gives your passenger the maximum area of body contact and support possible for long range comfort. Contoured contact area and Comfort Cell foam provides more support and less hot spots. Longer armrests provide more support and a relaxing ride for your copilot.
Bottom of the arm rests are tastefully finished with ABS finishing plates in a leather like texture to keep a very clean look. Includes tasteful stitch pattern and chrome or black studs if desired. Will install on all three trunk models, but only works properly on the King Tour-Pak as otherwise the armrests are too low for passenger's use.
All Corbin trunkrest pads include your choice of leather colors and styles at no extra charge and choice of stitch patterns in a variety of thread colors. The small pad for lower section of trunk is also included and installs easily with adhesive backed hook & loop fastener. Please be sure to let us know which trunk model you have so we can send the appropriate size pad with your order.
All three trunkrest models bolt up to your H-D trunk just like the stock pad and fit on all years of the Harley-Davidson King Tour-Pak, Chopped Tour-Pak and Razor-Pak. Caution, these models are not designed to work on the Premium Leather Tour-Pak. If you are adding a trunk to your bike, please assure the base part number (without color code) is one of the following: 53274, 53270, 53332, 53325 or 53287. In some circumstances you may need to drill holes in the lid for fitment, we include a drilling template with the trunkrest.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
Measurements:
Slim Trunkrest #502-2: 16" wide x 6" tall Ovalbac Trunkrest #HD-503: 14.5" wide x 10" tall Armrest #HD-PAK-ARM: 14" wide x 10" tall, Arms 8"
Trunk pads will fit all of the HD Tourpaks, but remember you may need to drill holes in the lid to have the correct mounting points.
The Corbin trunkrest pads are not designed for the new Premium Leather Tour-Pak.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
I love this seat. I've got 20,000 miles on it now in the last two years, and it's still going. -Tom J.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.