Corbin offers a variety of accessories for use on your 2026+ Harley-Davidson Grand Tour Pak. All are built up with our exclusive Comfort Cell foam for firm support and covered to match your Corbin saddle with genuine leather inserts and a host of color / material options.
Slim Trunkrest (#HD-26-GP-PAD) provides good passenger comfort with a wide, contoured contact patch while it keeps a clean profile on the bike. Built with High Density Comfort Cell foam material for firm support that lasts.
Slim pad molds perfectly to the trunk contours and gives a smoother appearance while still providing excellent support for your copilot.
Trunk Armrest (#HD-26-GP-ARM) Our large touring armrest gives your passenger the maximum area of body contact and support possible for long range comfort. Contoured contact area and Comfort Cell foam provides more support and less hot spots. Longer armrests provide more support and a relaxing ride for your copilot.
Cup Holder Right armrest accepts our ABS cup holder. Designed to carry a variety of cup sizes ranging from a common 12 ounce soda can to the Venti size drinks as Starbucks®. Here's the actual measurements if you'd like to make sure your favorite travel mug will fit:
Diameter: Tapers from 3.25" at top to 3.125" at bottom Depth: 3.5"
Constructed of durable ABS using a leather texture material that blends visually with the Corbin seat components. Fits nicely to the armrest for a clean profile.
Lower Pad (#HD-26-GP-LP) We also make a coordinated pad that mounts on the bottom section of the trunk for a totally integrated look. Constructed of the same high quality materials as the backrests and available with or without electric heat for an added bit of comfort to your passenger's lower back. Please note, the Corbin lower pad requires the HD mounting bracket so it functions just like stock. If you're trunk doesn't have the bracket already in place, please refer to the notes section of this page.
Corbin components include genuine leather and a wide selection of material options at no extra charge. Please review this image to understand how to custom order the cover on your new Corbin trunkrest. Pad installation is simple on your HD Grand Tour Pak.
UNIQUE TECHNOLOGY:
The design and manufacture of Corbin products is so unique that
Mike Corbin himself holds more than 60 United States Patents!
From the process itself to new innovations like the Corbin
Glovebox, you can count on highly functional and unique products
that work. Corbin products are manufactured under one or more of
the following US Patents: 6,848,156 B2; 6,729,516 B2;
D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937;
5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN:
A purpose-built hybrid material that provides a firm foundation
to support the carefully designed ergonomics of the Corbin
saddle. It provides a precision fit to every arc and contour of
the machine and rides on rubber bumpers to protect your paint.
We always design our basepans as flat as possible so bumps or
odd shapes don't telegraph through the foam to your body.
Click the button at left to learn
more...
COMFORT CELL® FOAM:
The heart of the Corbin saddle! Our exclusive, purpose-built
foam material, called Comfort Cell, was created to
provide a firm, resilient ride that doesn't break down. This
means it will support you for long days on the road. Over time,
Comfort Cell will break in to provide a personalized fit to your
posture and even greater comfort!
For the complete story, just click the
button.
ERGONOMIC SHAPING:
A major part of the design criteria of the Corbin saddle is its
ergonomic shape. This means the saddle's foam shape is designed
to emulate the curves of the human body. This provides more
square inches of body contact and helps eliminate hot spots.
This shaping also neutralizes the seating platform to help curb
sliding in the saddle, which reduces fatigue. In a nutshell:
more comfort for a longer ride!
Click the button at left for an animation that shows
how it works.
PATENTED MANUFACTURING TECHNOLOGY:
Always an innovator, Mike Corbin invented Integrated Molding
technology, which is now the process by which all Corbin
saddles are made. This process allows extremely tight
tolerances and creates a chemical bond between the foam and
base material.
To see what this is all about, click the button for
more information.
GENUINE LEATHER:
We use leather in all panels of the seat that contact your body.
This provides a luxurious ride that breathes with your body.
Leather will also break in along with the foam shape to support
a personalized fit. Available in a wide range of textures and
styles to suit your taste.
For more information about leather seating,
click away.
Concerned about how a material will look? We will gladly send
samples at no charge. Visit our
materials page
and use the chatbot to place your request. Limitations apply.
Saddle Cream
Take good care of your new seat and it will take care of you!
Perfect for all your leather goods.
$25
The components on this page are designed specially for the Grand Tour Pak released in 2026. They will not install properly on the earlier model King or Chopped Tour Paks.
If you are adding a Grand Tour Pak to your bike, it may not have come with the mounting bracket for the lower pad. This bracket will be required to use either the Corbin pad or an OEM one.
To order one from your local HD dealer, ask for part #52300774 (bracket) and two of part #11491A (rubber grommets).
Cup holder installs easily on right side Corbin Armrest with bolts included.
Thread this bolt through first and get it started into the armrest to save yourself a headache. Once all three bolts are started, use a 10mm box end wrench to snug them all up. Don't overtighten!
Your trunk armrest may have originally come with chrome button head allen screws in the mounting location. Use the included hex head screws and washers instead as they are easier to get started and tighten.
Corbin saddles (with very few exceptions) include
Genuine Leather Seating
to provide a luxurious look and feel... don’t let anybody tell you
that vinyl is just as good! You wouldn’t buy vinyl boots, would you?
WARNING:
Heater elements (when available) should never be installed in
motorcycle seats that will be used by riders that cannot sense heat.
This could create a hazardous condition.
Testimonials:
...We rode over 400 miles on Wednesday to get back home. The seat was just awesome. Jennifer is really thrilled to be able to see the road ahead again. -Dudley & Jennifer S.
Comments?
Of course we want to hear from you! Have some suggestions for us
or maybe comments for other riders? Send them via
THIS FORM.
Submit Photos:
Showcase your bike on Corbin.com! Use this form to upload photos
for possible inclusion on our website. Ready, set...
LET'S SEE 'EM!
General Contacts
California Factory:
Corbin Saddles
2360 Technology Parkway
Hollister, CA 95023
800-538-7035
Florida Showroom:
Corbin Saddles
1433 North US Highway 1
Ormond Beach, FL 32174
800-223-4332
PLEASE NOTE:
Corbin products are designed to fit very close to your bike for a clean look.
Due to this, other accessories or options can inhibit proper fit. As an example:
Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc.
If you have accessories installed on your bike, please let us know so we can
verify the fit for you.
MILITARY & FIRST RESPONDERS: As a small token of our appreciation for your service to our country, we proudly offer a 10% discount to active military, veterans and first responders. Thank you for what you do! Be sure to notify us when the order is placed, we cannot change orders already in process. Call us at 800-538-7035 so our Reps can apply your discount.
CUSTOM COVERS: You are always welcome to choose from our wide variety of colors and material options for your saddle. We provide these options at no extra charge as long as we can use our existing cover patterns. Creating a new cover design requires specialized custom work and will result in additional charges.
SADDLE WARRANTY:
Basepan, foam and hardware of the Corbin saddle is warranted to the original
owner for life. Cover materials, Heaters and workmanship are warranted for
one year. Product will only be authorized to be shipped back for refining of
shape or to replace/rectify defective parts. In cases where the rework requires
a new cover, a recover charge will be applied. Cash or credit refunds are not
available. All goods being handled for customer service consideration must be
accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY:
Structural integrity of Corbin fiberglass components are warranted to the
original owner for life. Finish and paint are warranted against manufacturing
defect for one year. Damage to product and / or painted surfaces from outside
forces or misuse is specifically not covered under warranty. Cash or credit
refunds are not available. All goods being handled for customer service
consideration must be accompanied by a Corbin receipt and a Return Material
Authorization (RMA) number.
EXPORT SALES:
USA pricing shown. When products are shipped throughout the world, you will
see higher prices because of freight, customs, duty & applicable taxes.
Please consider these costs when purchasing Corbin products outside the USA.
If ordering direct from Corbin, we will compute freight charges and add them
to the order. BUYER will be responsible for customs, taxes, duty or other charges.