Canyon Dual Sport for 2006-2008 Kawasaki ZX-14 (ZZR 1400)
What can you say about a production bike that requires an NHRA license if you want to run it at the local drag strip? (Yes, it's that fast.) Now just because the bike CAN get there faster, doesn't always mean that it will. You've still got to deal with those pesky speed limits and the four wheeled chicanes (traffic) so you should probably take care of the ergos. Naturally we're just the guys to help...
Our Canyon Dual Sport saddle provides excellent sport touring comfort while providing a look that matches perfectly to the lines of the ZX. Corbin's ergonomic design maximizes the body contact area to create more square inches of support in both the rider and passenger areas. For your passenger's added comfort, the Canyon Dual Sport accepts a removable backrest. Inside, the saddle is constructed with our exclusive Comfort Cell® foam to provide firm support that lasts.
Corbin's removable passenger backrest is easily adjustable to tailor its fit to your co-pilot's posture. A simple set screw on the rear of the backrest sets the angle without removing the backrest from the seat. Installation of the backrest is also very simple and requires a single screw under the saddle. Backrest support hardware is built inside the seat to keep a very clean look on your bike without external brackets.
Canyon Dual Sport works perfectly with your stock Kawasaki seat cowling or in the two up configuration with the passenger grab rail. Seat cowl mounts directly to the Corbin saddle just like it does on your stock seat.
Notice how close the Corbin saddle fits to the tank, tail section and sides... this kind of fit comes only from a Corbin saddle and our unique Fibertech basepan. Our rigid base material not only fits perfect to the bike, but provides a firm foundation to support the carefully designed foam shape. Corbin's ergonomic shaping creates a visually pleasing look on the motorcycle and adds to the custom appeal. This shape also creates a generous seating bucket for comfort and is sculpted narrow in the nose for positive ground reach.
On top, we include your choice of genuine leather seating panels in a wide range of colors and textures. The images above show our Black Carbon-Fiber leather seating with accenting Asphalt vinyl sides for clean, sporty looks. Choose from a range of color options at no additional charge! Naturally, your Corbin backrest can be made to match.
We use genuine leather seating in all of our saddle models because it breathes with your body and will conform along with the foam shape during break in. This provides an added bit of luxury on those long rides. In the side panels, we use a coordinating vinyl material that will support the foam shape and keep the saddle looking sharp longer. Be sure to care for you leather saddle properly with a quality conditioner like our Saddle Cream. This will help the leather to remain supple and weather resistant while it matures gracefully.
A final bit of customizing options is the removable finishing plate on the rear of our Ovalbac model backrests. The standard plate comes in an ABS leather look, but we can also supply one with a Carbon-Fiber look or primer if you'd like to have it custom painted. For just a little extra, we can even supply a model that is prepainted to your Kawi's stock color or even Chrome!
If you're looking to add a bit of storage to your bike quickly and easily, we offer a glovebox option that bolts to the Corbin backrest in place of the finishing plate. Providing four liters of convenient locking storage, it's plenty of room for maps, cell phones, bottled water, tire repair kit and other essentials. Constructed of durable ABS and available plain (black) or prepainted. Comes to you fully lined with lock preinstalled.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Rider seating: 12.5" wide x 15.5" long Back support: 5" Approx seat height: 31.5" Passenger seating: 10.5" wide x 10.5" long
Measurements:
Rider seating: 12.5" wide x 15.5" long Back support: 5" Approx seat height: 31.5" Passenger seating: 10.5" wide x 10.5" long
Mounts just like stock with brackets preinstalled on the saddle. You may need to adjust them slightly to match the lock mechanisms for proper latching, sometimes this takes a little patience. Once adjusted, tighen them securely and you're ready to go.
Works in the two-up configuration with the Kawasaki passenger grab rail or with your factory seat cowl installed.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
 
ITEM
DESCRIPTION
PRICE
#K-ZX14-6-CDS
Canyon Dual Sport, 2006-2008 Kawasaki ZX-14
$499
Seating Panels
 
Side Panels
 
Special Notes
 
 
 
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.