Incredible comfort gains in a package that looks right on the bike. Corbin has a long history of designing saddles that look as great as they perform and this Dual Tour is no exception. Notice how well the saddle fits to the tank and fender and provides two large seating buckets that don't overpower the bike visually. We sculpt each seating area for proper weight distribution which allows long range capability. Generously contoured platforms eliminate hot spots and centralized pressure that causes discomfort. Inside, our exclusive Comfort Cell® foam material gives firm support that conforms to your body. And as an added bit of luxury, we offer the option of electric seat heaters!

Dual Touring Saddle accepts two removable rider's backrests for added back support. Our backrests are fully adjustable to provide a tailored fit to individual's posture. Support hardware is internal to the saddle to keep a clean look without external contraptions. In the front, we've engineered a second adjustment that allows the position of the rest to be adjusted fore/aft. This special hardware also allows the backrest to fold down to ease mounting the bike. Use a single backrest transferred front to back as needed or order two backrests for full time use.

Backrest installation is easy, simply slide the backrest shaft into the built in hardware and secure it in place with the provided setscrew. There is no need to remove the saddle from the bike for this procedure. Once the backrest is installed, all adjustments can be performed without removing the saddle. Like the saddle itself, Corbin backrests are shaped to fit the curve of your body for better fit and greater comfort. If you prefer, our Dual Touring saddle will also work with your Honda sissy bar system instead of the rear passenger backrest.

As you can see, the ergonomic design of the Dual Touring saddle also gives a nice flowing shape on the bike for a clean look. Inside the saddle, Corbin's Comfort Cell® foam provides a nice firm perch that supports your body indefinitely and doesn't cave in like softer materials. Comfort Cell feels firm when you first ride on it, but it is this support that gives you day long comfort. That's why we always say "Firm is a good thing". Using a firmer foam material also allows us to provide superior support even with lower seating platforms... this helps us engineer seats that look great too!

Standard options for your Dual Touring seat are our Chrome V-Rail and electric heater units. Corbin seat heaters are completely built into the saddle so they're simple to install. We include everything you need to wire into your stock harness and enjoy heated luxury on those chilly morning rides. Two position switch allows you to choose high or low setting that is maintained automatically. Our Chrome V-Rail bolts up to the Dual Tour saddle for a nice nostalgic touch. V-Rail mounts directly to points built into the saddle for a very clean look and comes delivered in Triple plate show quality chrome.

We use genuine leather seating panels for a luxurious ride that breathes with your body. Our tasteful "04 deco" stitch pattern comes standard for an added bit of flair (required on heated models). Leather is extremely durable and will break in along with the foam shape to conform to your body. Be sure to care for your leather saddle properly with a quality conditioner like our Saddle Cream. This will help the hied to resist the elements and remain supple. The leather seating will conform along with the foam shape and provide a personalized fit to your posterior. Over time, your leather saddle will develop its own unique character just like your leather jacket does.

Another option for your saddle system is removable finishing plates on the rear of the Ovalbac model backrests (#02-S shown). Our standard finishing plate is a leather look ABS, but we can also supply a Carbon-Fiber look or primer if you'd like to have it custom painted. For just a little extra, we can provide an ABS plate prepainted gloss black or even a chrome steel model like the ones shown here. This looks particularly at home on the big VTX cruiser.

If you're looking to add a little storage space to your VTX, how 'bout this cool new glovebox for the rear of your Ovalbac backrest (#02-S only). Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys. Click on over to the Glovebox page to learn more HERE.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
	ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
	Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Measurements:	Rider Seating: 15" wide x 15" long x 9" deep Depth w/ backrest: 19" Passenger: 12" wide x 13.5" long Approx seat height: 27.5"
	Installation Instructions: Page 1 - Page 2
	Installation: Saddle installs easily with a tongue in the front and a single screw into the fender. If you opt for the heated model, we include the pigtail adapter that integrates with the Honda fusebox for simple installation.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
#VR-DT Chrome V-Rail	Corbin's Chrome V-Rail bolts up easily to your Dual Tour saddle with no additional brackets. Triple-plate chromed for a show quality finish, the V-Rail provides a nice nostalgic look for your bike. Does not work with Sissy Bars installed. *More Info*
#02-SB Standard Ovalbac®	Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
#297-SB Standard Backrest	The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
#02-L Large Ovalbac®	Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
#02-T Tee Ovalbac®	This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
#02-G Gunfighter Ovalbac®	If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
#GB Gunfighter Backrest®	All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
#GLOVE-BOX Glove Box	A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*

Testimonials:
Submit Your Comments	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 General Mailboxes Hollister Factory Florida Showroom Online Service Center

Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.

	ITEM	DESCRIPTION	PRICE
	#H-VTX-F-DT-E	Dual Tour w/ Heater, Honda VTX 1800F	$699
	#H-VTX-F-DT	Dual Tour no Heater, Honda VTX 1800F	$479
	#VR-DT	Chrome V-Rail	$139
	#02-SB	Ovalbac Leather Backrest (ea)	$229
	If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
	Seating Panels	Black Leather Asphalt vinyl Black Vinyl Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber leather Black Carbon-Fiber, hi-gloss Black Carbon-Fiber vinyl Black 'Ostrich' leather Black 'Shark' leather Black 'Snake' Blue Carbon-Fiber vinyl Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' leather Burgundy vinyl Carbonium Charcoal Gray vinyl Charcoal Carbon-Fiber vinyl Charcoal 'Snake' leather Chocolate Brown leather Classic (Basketweave) leather Candy Red vinyl Emerald Green vinyl Forest Green vinyl Ghost Gray vinyl Goldenrod vinyl Gray leather Gray Partner's leather Gray Partner's vinyl Gray 'Ostrich' leather Gray 'Snake' leather Harley Blue vinyl Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl Plum vinyl R-80 Red vinyl Red Carbon-Fiber vinyl Royal Blue vinyl Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Gray vinyl Tan leather Tan 'Baby Alligator' Tan 'Ostrich' leather Taupe vinyl Teal vinyl Tomato Red vinyl White vinyl Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Side Panels	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Welts	Black No Welts Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Braid Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Lime Green Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Stud Bands	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Studs	No Studs Chrome Studs Black Studs
	Special Notes

	All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.

   

	PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
	SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
	FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
	EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.