Part of a series of modular seating components for the H-D Street Rod. Standard Hollywood Solo (shown) features a roomier seating position moved back approximately two inches from the stock seating posture. Sculpted for an ergonomic fit to the human body for better weight distribution and support. Using our exclusive high density Comfort
Cell foam allows a low profile that will support you for hours. Works with a coordinating passenger pillion, fastback tail or Smuggler trunk.
Corbin's pillion accepts a removable passenger backrest for added copilot comfort and security. Normally we wouldn't built backrest support into a low profile style like this, but the ignition module on the fender required a slightly higher seating platform which left us room for the hardware. Corbin backrest installs with a single screw under the saddle and adjusts easily to passenger's profile. Like the saddles themselves, our backrest is sculpted to fit the human body for maximum weight distribution and comfort.
If you prefer to keep a sportier look on your Streetrod, we offer a Gunfighter style pillion pad as well. This model still provides for passenger transportation, but is not ergonomically corrected like the Hollywood pillion shown above. This model is designed more for a slick look over your rear fender. Inside it is built of the same quality materials as our solo & pillion so short trip passengers are fine. Naturally it also comes in your choice of cover materials for a custom look. Note: this model is not designed to work with the HD baseplate / passenger backrest.
Notice how the Corbin saddle maintains a smooth, low profile line even with backrest hardware inside. While developing this setup, we engineered our basepan to mold over the electronic components on the fender in a much smoother and lower fashion which gave us more flexibility of design. Our Fibertech base material provides a rigid platform to support the foam and assure the carefully designed ergonomic shaping remains intact. It also allows us to build a very close fit to the fender and chassis for a custom look. Because of this close fit, we have a pillion pad specially designed to work with the HD fender baseplate / backrest if you have it.
All components include genuine leather seating panels in your choice of colors and styles. On this page we show a plain black model that gives a subtle and classy appearance and also one covered completely in our grey faux snakeskin material for a bit more radical look. Leather provides a luxurious ride that breathes with your body and will break in along with the foam shape for a personalized fit. Naturally, all material options available for your saddle(s) are also available for your Corbin backrest.
We offer two models of the Hollywood Solo; the Standard model (this page) and a Close model. This model is designed specifically for larger &/or taller riders that feel they are cramped to the tank with the stock seat or want seating that allows them to move around a bit. Click on the attached image for a side by side comparison of the two seat modes. Pocket of the standard Hollywood Solo is roughly two inches further back than the stock cushion. The Close Hollywood Solo has a seat pocket placed similar to the stock seat with a slightly lower platform.
Notice how the sculpted shaping of the Corbin components fit the human body for good support. Not only does this do a better job of dispersing your weight, but it helps to eliminate hot spots. Our neutralized seating position helps to eliminate sliding in the saddle which in turn reduces fatigue. Notice the key lock mounting system incorporated into the Hollywood Solo. We've built in this system to help secure your sadde investment against thieves while maintaining simple operation at fuel stops. Bracket installation is simple with common hand tools.
Corbin's Ovalbac series backrests have removable finishing plates for an added custom touch. Our standar plate is a leather look ABS, but we can also supply a Carbon-Fiber or Aluminum look. For just a little extra we can even supply one prepainted gloss black or a chromed steel model. If you'd like to add a bit of storage capacity, we offer a new Glovebox design that bolts up in place of the finishing plate. Providing enough storage for essentials like bottled water, spare gloves, cell phones, pda, maps and keys, the Glovebox is very handy. Currently available in primer or Gloss black and soon to be available prepainted to match your Street Rod's paint as shown! For complete Glovebox info, click here.
Notice how closely the Corbin pillion fits and emulates the shaping of the HD fender. Because of this we will be offering two models of the passenger pillion; one fits directly with the fender as shown, the other fits with the sissybar / backrest assembly available from Harley-Davidson. Either will work perfectly with the Corbin Hollywood Solo front, but not with the stock components. Due to the size of the "box" built into the stock basepan to cover the ignition module, we were unable to make our saddles work with the stock components... sorry.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
MODULAR SEAT SYSTEM: This component is part of our modular seat system. Engineered to work in a variety of configurations to provide maximum versatility. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. Click the button to see how it all works.
Measurements
Rider seating (standard): 12.5" wide x 14" long Rider seating (Close): 11.5" wide x 12.5" long Passenger: 10" wide x 10" long Approx seat height: 31"
Measurements:
Rider seating (standard): 12.5" wide x 14" long Rider seating (Close): 11.5" wide x 12.5" long Passenger: 10" wide x 10" long Approx seat height: 31"
Due to the shaping of our basepan and working around the components on the fender, Corbin components do not interchange with the stock pieces!
Installation: Our front and rear saddles come with all hardware required for immediate installation right out of the box. Our included latch bracket installs with common hand tools and keeps the hinge mount system with the addition of a lock to secure your investment in a quality saddle.
Front saddle comes with a hinge/latch bracket preinstalled on the saddle and a key lock bracket you mount to existing locations on your chassis. Once the bracket is installed, the Corbin saddle will hinge just like your stock seat but with the addition of a locking latch.
Rear saddle uses the tongue in the rear and two mounting points in the front that use stock bolts. Just slide the saddle into place, slip fiber washers under the mounting tabs and secure with two bolts. Simple!
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-SR-H
Hollywood Solo for Streetrod, standard
$319
#HD-SR-H-C
Hollywood Solo for Streetrod, CLOSE
$319
#HD-SR-HP
Hollywood pillion for Streetrod, No Rack
$299
#HD-SR-HP-RACK
Hollywood pillion for Streetrod with Rack
$299
#HD-SR-GP
Fastback pillion for Streetrod
$299
Seating Panels
Side Panels
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
