Classic Solo & Pillions for 2006-2008 Harley-Davidson Dyna Wide-Glide
Corbin offers two versions of our Classic solo seat and a comfortable pillion pad option for your passenger. The uniquely styled Classic Solo looks excellent while providing an extraordinary amount of rider comfort. Corbin's seating platform conforms to the shape of your body for support and more square inches of body contact. This is one of the secrets of long range comfort and is a staple of Corbin design. For added back support, our solo saddles accept an optional rider's backrest that provides an additional nine" of vertical support.
Got reach issues on your Wide-Glide? We also make a "Close" version of the Classic solo that provides seating closer to the bars for an easier reach. We've also made the nose a little narrower to allow for easier ground reach. To figure out which design is best for you, just follow these simple steps: Sit on the motorcycle in your regular riding posture and have a friend measure from the threaded hole in your fender to the area where you are seated. Now compare this measurement: 14.5" use our Classic Solo, 16" use our Close Solo.
Both Classic solo and Close solo accept a removable rider's backrest for added support. Our backrest installs easily into hardware concealed inside the saddle for a very clean look. In order to fit a wide range of riders, it is fully angle adjustable. Just install the backrest into the saddle, lock it in place with a single setscrew and adjust the backrest angle to suit. A variety of backrest styles are available to suit your taste and the amount of support desired.
For maximum versatility we've designed the Corbin solo saddles to work with a passenger pillion seat. Like the solo saddle, our passenger seat is designed for better weight distribution and long range support. It is built with our exclusive high-density Comfort Cell foam to provide firm support that lasts. It comes decorated in your choice of leather styles to coordinate with your Corbin solo. Installation is simple with all required hardware included. Passenger pillion works with a variety of H-D accessories and options like the "detachable" sissy bar or hard mount sissy bar shown. We also make a coordinated backrest pads for these accessories to complete the custom look on your bike.
For an added bit of luxury, both the Classic Solo saddle and Close Solo have the option of electric heated seating. You'll be amazed how a heated seat can raise your core body temperature during one of those chilly morning rides. This system easily wires directly to your Harley's fusebox and provides two levels of heat with the flip of a switch. Heater unit and automated controller are built into the saddle and come preinstalled. Two-position switch is conveniently located on the left side of the seat.
Shaping of the Classic Solo and Touring Pillion is designed to emulate the contour of your body. This gives excellent support for longer-range comfort. Our neutralized seating also helps to curb sliding in the saddle that greatly reduces rider fatigue. Inside, the saddle is built up with our exclusive Comfort CellŪ foam for a firm, supportive ride that lasts. Corbin saddles feel firm when you first ride on them, but this firmness is what supports your body and maintains the correct shape. Over time, Comfort CellŪ will break in and provide a personalized fit to your body for even greater comfort.
Corbin's Ovalbac series backrests come covered to match your saddle, but also offer the option of custom finishing plates on the rear. Backrests come standard with an ABS leather look backing plate but you can choose an aluminum look, carbon-fiber look or even a paintable model at no added charge. For a little extra we offer pre-painted gloss black or a chromed steel model that coordinates perfectly with the look of the bike.
Looking to add a bit of storage to your bike? We now offer this slick "Glovebox" that bolts up to the Corbin Ovalbac backrest in place of a finishing plate. This little beauty provides four liters of locking storage with is plenty for all your small essentials like cell phones, maps, water bottles and even a spare pair of gloves. Fully lined on the inside to protect your cargo and the locking door keeps it all secure. Constructed of durable ABS and available prepainted gloss black.
Saddles and backrests include genuine leather seating panels in your choice of colors and styles. Leather provides a luxurious perch that breathes with your body enhancing comfort value. Leather will also break in along with the foam shape in support of the personalized fit. In the side panels we use a coordinating vinyl material to keep the saddle looking sharp longer and support the foam shape. We also include the option of chrome studs at no additional charge (be sure to specify when ordering). Leather seating will perform for years and add value to your Corbin investment. Over time it will develop its own unique character just like your leather jacket. Be sure to care for it properly with a quality conditioner like Corbin's Saddle Cream to keep the hide supple and weather
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Measurements
Classic Solo seating: 12" wide x 15.5" long
Close Solo seating: 12" wide x 14" long
Rider back support w/ #02-S: 10"
Touring Pillion: 9" wide x 9" long
Measurements:
Classic Solo seating: 12" wide x 15.5" long
Close Solo seating: 12" wide x 14" long
Rider back support w/ #02-S: 10"
Touring Pillion: 9" wide x 9" long
Installation Instructions: [Page 1] - [Page 2] Classic solo and pillion pad install on a new Corbin keylock system. All brackets and required hardware is included. In image: Solo seat latch bracket "A", Rear mounting stud for Solo seat "B" and Rear mounting stud for pillion seat "C".
Pillion Pad: Install the Rear mounting stud into your fender. Slide the keyhole style latch (bottom of pillion seat) onto the stud and secure the front of the pillion seat with the Solo Seat mounting stud as shown.
Solo saddle: Mounts in the same fashion as the pillion seat with a keyhole latch under the saddle. If pillion seat is installed, secure the seat on the lower catch of the stud. If no pillion seat, secure onto the higher catch of the stud. Now lower the nose of the saddle onto the latch bracket and push down until you hear two clicks.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
With the Corbin EZ-Fill adding oil to your primary is simple. Remove the knurled plug from the inspection cover and pour. It looks great and works just as well (a hallmark of Corbin design). Available for: FX, FL Shovelheads, FLST Softails, FXDWG Dyna Wide-Glide, FXR Models, Roadking, Road-Glide and FLH / FLT models. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-FXD-6-S-E
Classic Solo, 2006-2007 DYNA & WIDE-GLIDE, Heated
$539
#HD-FXD-6-S
Classic Solo, 2006-2007 DYNA & WIDE-GLIDE, non heated
$429
#HD-FXD-6-CS-E
CLOSE Solo, 2006-2007 DYNA & WIDE-GLIDE, Heated
$539
#HD-FXD-6-CS
CLOSE Solo, 2006-2007 DYNA & WIDE-GLIDE, non heated
$429
#HD-DWG-6-TP
Touring Pillion, 2006-2007 WIDE-GLIDE
$239
#HD-FXD-6-TP
Touring Pillion, 2006-2007 DYNA-GLIDE
$239
Seating Panels
Side Panels
Welts
Stud Bands
Studs
Stitching
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
