A comfort addition for your Zuma! We've taken the same developments that have made Corbin the number one choice for motorcycle seats worldwide and built them into a comfortable two-up seat for your Zuma 125. Our ergonomically designed seating platform fits the shape of your body for excellent weight distribution and support. This eliminates hot spots from pressure points created by the stock seat. Additionally, our high-density Comfort Cell® foam material gives firm support that doesn't break down as you ride. This equates to more time in the saddle with less wear and tear on you!
Designed to set you at a comfortable reach to the bars with room to slide forward or back as desired. We also taper the nose of the seat in closer to allow good leg clearance at stop signs. This gives you the best of both worlds since you can slide back into the wider area of the seat while cruising for maximum body support. Of course it operates just like stock and keeps the hinge action to provide access to the storage area. New weather stripping is included and comes already in place on your new seat. Please note that in order to improve the ergonomics of the seat, we do not have our basepan notched on the underside like the stock unit.
Built up with our exclusive Comfort Cell® foam material for firm support that lasts. Our seats feel firm when you first sit on them, but this is one of the factors that make Corbin saddles work so well. While you stock seat feels soft and comfy when you first sit on it, it quickly crushes down and leaves you sitting on the basepan (ouch). Comfort Cell® is designed to support your body in a sculpted bucket for comfort that lasts all day. Over time, your saddle will break in to take on your shape and provide a personalized fit to your body.
The ergonomic shaping of the saddle naturally makes a nice, flowing line on the bike. Also notice how well the Corbin basepan fits to the shape of the Zuma tail section for a perfect fit. In the Corbin R&D shop we look carefully at the lines of the bike and design the shape of our seat to fit in visually. This gives you an excellent blend of comfort AND style.
On the top, your new saddle includes the finest materials available. For a custom touch we've used natural grain black seating with Carbonite tail section and Asphalt sides along with a tasteful stitch patter to tie it all together. As always, a variety of material options are available by custom order at no extra charge if desired.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Measurements
Rider Seating: 13" wide x 16" long Passenger: 9.5" wide x 7" long Approx. seat height: 31"
Measurements:
Rider Seating: 13" wide x 16" long Passenger: 9.5" wide x 7" long Approx. seat height: 31"
Corbin Dual Saddle installs easily in place of your OEM seat and works just like stock with front hinge transferred from OEM unit onto Corbin seat. Corbin saddle includes rear latch pin preinstalled.
In order to improve the ergonomics of the seat, the Corbin basepan is not "notched" on the bottom like the stock seat. This means most full face helmets will not fit in storage compartment.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Saddle comes standard with Black natural grain seating, Asphalt side panels and Carbonite tail. Other color and material combinations are available by custom order. For additional information, just click on the "Glossary" or "Materials" buttons below.
 
ITEM
DESCRIPTION
PRICE
#Y-ZM-125-9
2009 Yamaha Zuma 125
$349
Seating Panels
 
Side Panels
 
Welts
 
Tail Section
 
Stitching
 
Special Notes
 
 
 
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.