 |
|
Comfort and style together in one package is what made the Corbin name famous worldwide. Delivering a quality product at a fair price constructed of the finest materials available has made Corbin the number one manufacturer of motorcycle saddles for nearly forty years! Our Gunfighter saddle for the Z750 S is a perfect example of this combination of form and function.
Up front the seating area has been ergonomically designed to distribute body weight over a greater area. This provides longer-range support and eliminates hot spots. Neutralized seating platform helps to hold you body in place and curbs sliding in the saddle. This also helps to relieve rider fatigue by taking pressure off your wrists and knees. Our exclusive Comfort Cell foam material on the inside provides a firm, resilient ride that supports your body indefinitely. Over time, Comfort Cell will break in and adapt to provide a personalized fit to your body.
For a solo look, the Gunfighter tail section is shaped to emulate the lines of the Z750S bodywork. The lines and sculpting of the tail match up with the lines of the bike... very cool. On the inside, the tail section is padded and upholstered to provide for short trip passenger capability. Although the shaping of the tail is designed primarily for looks, the Comfort Cell foam still provides a good perch for your copilot on short to medium length trips. If you're looking for a long-range two-up seat, we suggest our Gunfighter & Lady model.
Bucket shaping of the front seating area gives an unprecedented amount of body support. Notice how it curves up at the back to provide support to your lower back. Towards the front of the bucket we design the saddle narrower to allow for ground reach. Smaller riders may prefer to slide forward and out of the bucket at stop signs for best ground reach.
Our Fibertech base material and patented manufacturing process allows a perfect fit to the lines of the bodywork and tank. This rigid baseplate provides the saddle with a firm foundation to support the carefully designed ergonomics of the foam. The entire saddle rides on rubber bumpers to protect your paint job and mounts to your bike with the stock key lock system. Latch bracket comes pre-mounted on the saddle.
On the outside we use genuine leather seating for a luxurious ride that breathes with your body. Leather will break in along with the foam to support the personalized fit. A wide range of leather & vinyl materials are available for a custom look at no extra charge.
Corbin's saddle mounts like stock with a tongue in the front and included latch bracket at the rear. Rear seat latch is adjustable to assure a perfect fit with your Kawasaki key lock system. When new, you may wish to put a washer between seat and bracket to ease locking on the bike. Remove these washers once the rubber bumpers have broken in a bit.
|
|
|
 |
 |
 |
 |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
 |
 |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. |
 |
 |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. |
 |
 |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info |
 |
 |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. |
 |
 |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more... |
 |
 |
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button. |
 |
Measurements |
Rider seating: 11.5" wide x 15.5" long
Approx seat height: 31"
|
|
|
 |
 |
 |
Measurements: |
Rider seating: 11.5" wide x 15.5" long
Approx seat height: 31"
|
 |
 | Mounts easily with bracket preinstalled on the Corbin saddle that meshes with your stock key lock system. Simply slide the saddle into place nose first to engage the tongue and lower the rear into place. Push firmly on the passenger platform to latch and you're ready to hit the road. |
|
|
 |
 |
 |
 #Conditioner Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
|
 |
 #02-SB Standard Ovalbac® |
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
|
 |
 #297-SB Standard Backrest |
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
|
 |
 #02-L Large Ovalbac® |
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
|
 |
 #02-T Tee Ovalbac® |
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
|
 |
 #02-G Gunfighter Ovalbac® |
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
|
 |
 #GB Gunfighter Backrest® |
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
|
 |
 #GLOVE-BOX Glove Box |
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
|
 |
|
|
 |
 |
 |
Testimonials: |
|
 |
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
 |
General Contacts |
|
|
|
 |
 |
 |
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
 |
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
 |
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
 |
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
 |
 |
|