Corbin's Dual saddle provides sporty looks that fit the Monster visually combined with two-up rider comfort. Designed to fit perfectly and work with your Ducati seat cowling. Notice how the Corbin basepan molds perfectly to the tank and side panels, this kind of fit is available only with a Corbin saddle. Our rigid Fibertech base material gives the saddle a firm base to support the carefully designed foam shape.
Seating positions are neutralized to curb the tendency to slide forward in the saddle. Wider, ergomonically sculpted platforms distribute weight evenly for longer range support. Inside, Corbin's high density Comfort Cell foam allows for a sleek profile while keeping a comfortably resilient ride. Tail section of the seat has been shaped into a well defined passenger area to give greater co-pilot support.
Includes genuine leather seating panels and Moto Sport emblem for a custom touch. We recommend our Carbon Fiber style leather with matching carbon-fiber embossed vinyl sides to keep the racebike theme. Leather provides a nice perch that breathes with your body and breaks in along with the foam shape for a personalized fit. Be sure to care for it properly with a quality conditioner like Corbin's Saddle Cream.
Works with stock Ducati cowling and mounts to the motorcycle like the stock seat. Functions on key lock system with brackets preinstalled on saddle.
Corbin now uses this special "Italian Flag" logo on all of the saddles we make for Italian motorcycles. If you prefer the standard Corbin stitch, please specify when ordering.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Measurements
Rider seating: 10" wide x 13" long Passenger: 7" wide x 7.5" long Approx seat height: 31" (unladen)
Measurements:
Rider seating: 10" wide x 13" long Passenger: 7" wide x 7.5" long Approx seat height: 31" (unladen)
Saddle mounts like stock with a tongue in the front and latch pin in the rear. Corbin latch integrates with your stock Ducati key lock.
This seat is very similar to our standard Monster saddle. However, the basepan is slightly different and the rubber bumpers don't make correct contact if you use the wrong saddle design. This seat is specifically designed for the Testastretta.
This seat will not fit with a "Tailchop" on the bike.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#DM9-7
Dual Saddle, 2005 - 2008 S4R Testastretta
$439
Seating Panels
Side Panels
Welts
Italian Flag Emblem
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
Corbin now uses this special "Italian Flag" logo on all of the saddles we make for Italian motorcycles. If you prefer the standard Corbin stitch, please specify when ordering.
All Corbin saddles (with very little exception) include 
