Smuggler... is a part of Corbin's modular seating system. We've created a two piece saddle system that allows you to switch from solo to dual easily using a built in key lock system. For a clean solo look and the most convenient storage available, our Smuggler trunk is just perfect. Locking onto your bike in place of the passenger seat, Corbin's Smuggler trunk comes prepainted to coordinate with your stock paint (please specify color) and provides a secure area to stow essentials. Up front, the enhanced ergonomics of our front saddle create a perch that provides long range, touring comfort.
Naturally we've built the Smuggler to fit perfectly to the lines of the Spyder to create an integrated look. Every little detail picks up shaping of the bike and lends a bit more flair. Our patented molding process and exclusive materials create a part with very minimal variation from piece to piece so we can design a precision fit to the bodywork. The Corbin front saddle mounts using included brackets and the Smuggler trunk and/or rear seat mount to this bracket and secure with integrated Corbin lock system.
Smuggler's generous capacity helps to keep all your essential gear handy. This model is actually large enough to carry a laptop... not all laptops mind you, but many. The computer bag we show going into the Smuggler above measured 12" x 15" x 2.25" and contained a Toshiba with a 14" screen. Plus, there's more than enough room for keys, maps, spare gloves, cell phone, PDA, bottled water.... there's even enough room for a digital camera in there! You'll find the Smuggler so convenient that you'll be getting stuff out of it every time you stop your bike. Naturally it comes fully finished and prepainted to coordinate with your stock paint color so the looks are spectacular right out of the box.
Front saddle uses our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. Notice how the bucket is designed to emulate the shape of your body. This gives excellent support for longer range. Neutralized seating helps to curb sliding in the saddle which greatly reduces rider fatigue.
Smuggler trunk includes bump pad coordinated with leather cover to match your Corbin front saddle. Inverted Vee design visually fits in perfectly with the Spyder bodywork. Pictures just don't do it justice. When you see in person how well the trunk is integrated to the bike, you'll be amazed. Notice how closely the Corbin designers were able to make the Smuggler fit to the clean shaping of the tail section. The graceful, aerodynamic looks have been kept true for the best possible visual appeal. Smuggler is constructed of our durable Fibertech material for a fine finish and long term durability.
Smuggler comes fully lined to help protect your cargo and cushion some of the road noise. Naturally, the door opening is fully weather stripped to guard against foul weather as well. Locking door keeps things secure and simple to access. Our new stainless steel hinge mechanism allows the door to open very wide to keep it out of the way when stowing your gear.
Front saddle is also available in a Lamonster Cut that was designed specifically for Lamonster at SpyderLovers.com. This model also features the Lamonster logo stitched in the side panel. Please specify the correct part number when ordering.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
MODULAR SEAT SYSTEM: This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. Click the button to see how it all works.
Rider seating: 16" wide x 17" long Smuggler Capacity: 12 Liters
Front saddle mounts with included hinge and is designed to use an integrated rigid prop arm. Once installed, Corbin seat will hinge up providing under seat access as needed.
Passenger seat or Smuggler install with Corbin integrated lock system. All brackets and required components are included and install easily with common hand tools. Passenger seat has key lock in side panel, Smuggler provides latch access inside.
When installing Smuggler trunk, passenger seat sensor will not be used as our trunk does not allow for passenger transportation. Remove the sensor from the OEM seat and leave it plugged into the wiring harness so your bike won't get an error code. There is room under the Smuggler to tuck the sensor away for future use.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Front Saddle no heater, 2008-2013Can-Am Spyder RS/ST
Front Saddle no heat, 2008-2013 Spyder LAMONSTER Cut
Front Saddle w/ Heat, 2008-2013Can-Am Spyder RS/ST
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.