A comfortable alternative for your radically positioned sportbike! Corbin's pilot saddle adds a lot visually, but also gives you a longer comfortable riding range. We've designed it with a concave seating surface that better matches the contour of your body, which gives you more square inches of body contact. Look at the difference in shape between our seat and your stock seat... it's not hard to visualize which is a better fit to your posterior.
This careful shaping also neutralizes the seating position, which means you won't find yourself sliding towards the tank as much. Many people incorrectly attribute the discomfort in their knees to the tight ergonomics, but in reality it is more often caused by fatigue as you continually push yourself back from the tank. By eliminating the downhill slope of the stock seat, we relieve much of the stress on your knees and wrists. Again... longer riding range!
On top we use genuine leather for a totally custom look and a platform that breathes with your body. Naturally we offer you a wide range of leather styles and colors to choose from. To go along with the sportbike theme of the Buell, we suggest our Carbonium seating with contrasting Asphalt vinyl sides. Vinyl side panels help support the foam shape and keep the saddle looking sharp longer.
Sorry, but given the size of the passenger seating area available, we didn't tool up a rear seat for the 1125.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Measurements
Seating: Approx. 13" wide x 12" long
Approx Height: 31.5"
Measurements:
Seating: Approx. 13" wide x 12" long
Approx Height: 31.5"
Corbin's front saddle comes ready to install on your bike with necessary brackets pre-mounted. The only thing you will need is a Torx wrench (#27) and some mild grip threadlock compound (blue Loctite).
Simply remove your stock seat by lifting the rear corners and taking out the two Torx head screws that hold the seat to the chassis. Slide it towards the rear of the bike and remove. To install the Corbin saddle, reverse this process by sliding the Corbin seat into place positioning the tongue of the saddle into the clip on the frame. Now lift up the rear corners of the seat and secure it in place with the two stock bolts through the Corbin bracket and into your sub-frame. We recommend using threadlock on these bolts to assure they will not accidentally back out and torque them to 5.5 ft/lbs unless specified differently in your owner's manual.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-B-1125-F
Front Saddle, Buell 1125R & 1125CR
$259
Seating Panels
Side Panels
Welts
Stitching
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
All Corbin saddles (with very little exception) include 
