 |
|
The Yamaha Warrior is a very unique blend of cruiser and sportbike with a look all its own. As such, you can't just take a slab of plexiglass, slap it on the front and expect it to look good. Are we right on this?
Corbin has taken the shape of our traditionally styled Fleetliner fairing and reflowed it to extend to the Warrior headlight providing a more aggressive look. Naturally we've retained all the aerodynamic engineering so it provides excellent wind protection. Another example of form and function expertly combined in Corbin fashion. If you're looking to capitalize on the traditional cruiser aesthetic, this is the fairing for you!
You've seen fairings like this on cruiser models before, but Corbin has upgraded the design to provide better areodynamics. Notice how the shape of the fairing starts at the headlight and flows back to part the wind more gracefully. This transfers the highest pressure area rearward of the steering pin which gives much greater stability at speed (a kind of rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.
As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise which adds to the comfort value.
Constructed of our Fibertech material for a smooth clean finish and durability. Our fairing is then hand painted and pinstriped to coordinate with your stock paint scheme in either a single color or two-tone. Subtle details like the center rib make it beautiful to look at. Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided.
Corbin’s Fleetliner fairing is simple to install with complete directions and all required brackets included. To assure a perfect look on your Warrior, brackets come painted to coordinate with bike and give a subtle appearance. Installation can be accomplished by an average weekend mechanic.
|
|
|
 |
 |
 |
 | Installation Instructions: Warrior Fairing |
 |
 | Fleetliner Fairing is designed to mount up easily to your stock front end. Simple installation with complete instructions and all required brackets included. Brackets are painted to blend in well with the bike. |
 |
 | The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree. |
 |
 | Accepts standard Harley-Davidson windscreens in a variety of styles and sizes if you'd like to customize your fairing. Ask a local shop about OEM & Aftermarket windscreen options for the 1997 & up FLHTC models. |
 |
 | If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing. |
|
|
 |
 |
 |
 Windscreens |
Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here. *Check 'em out...*
|
 |
 #Conditioner Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
|
 |
Corbin Saddles |
Naturally we make a range of saddle models for your Warrior. Just check out the index page for complete details. You'll find it HERE. |
|
|
 |
 |
 |
Testimonials: |
|
 |
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
 |
General Contacts |
|
|
|
 |
 |
 |
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
 |
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
 |
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
 |
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
 |
 |
|