Corbin has taken a whole new approach to the posterior perch for quads. We know you don't spend a lot of time with your butt planted on the seat when you're out tearing up the trails, but in your leisurely moments you'll be happy to find a nice comfortable place to plant your tush so you can recoup some energy. Besides the obvious benefits of a more comfortable seat, we've made it look nice too with a host of custom options all included.
Here's how it works... Towards the rear of the seat, you'll find a wider, more level seating platform. This shape eliminates the centralized body pressure caused by the stock unit and gives you more square inches of body contact. More contact equals less hot spots! Our neutralized seating makes it easier to slide fore and aft which gives you greater control over the bike. Of course we've made the shaping toward the front to allow you to hang off in the corners as needed.
Notice how the shape of the seat makes a smooth transition up the tank and towards the bars. Again, this supports your ability to move around on the bike and get forward on those hill climbs. Our rigid Fibertech basepan material helps us to maintain tight manufacturing tolerances which equates to a perfect fit to the body groove of the bike. Naturally, installation is a snap.
When you get a chance to just putt along and catch your breath, slide your body towards the rear and take advantage of the wide contoured seating area. We've dished it out to better fit the shape of your body and provide ergonomic support. On top, we're created a cover pattern that looks custom without being overbearing and we use only the finest, colorfast and durable materials available. From this side, you can also see the key lock system we use for installation.
Again, notice the precision fit of the Corbin basepan to the bodywork of the Raptor. Our patented molding and manufacturing processes allow us to create a part that fits close to the body for a very clean look. Stock nylon basepans are too flexible for this kind of fitment. Our quad saddle comes with a special latch bracket that installs easily and replaces a single bolt in your chassis. Once the latch pin is installed, your new seat will mount and remove with the built in key lock along the right side.
Our grippy "Black Husky" seat insert is a durable fabric material backed with rubber for comfort and water resistance. Over the edges we use our new Asphalt black material and along the sides a Silver Carbon-Fiber embossed vinyl for a custom touch. We also offer this Carbon-Fiber material in Blue, Red, Black or Charcoal to coordinate with your quad at no extra charge. Look as custom or as subtle as you want! To care for the materials on your new Corbin, we recommend our Saddle Cream... excellent for vinyl and leather!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Seating: 12.5" wide x 29" long
Measurements:
Seating: 12.5" wide x 29" long
Installation: Corbin's Raptor saddle installs very easily using our unique key lock system built into the seat. All brackets and hardware is included so saddle is ready for installation right out of the box.
Simply remove the stock bolt from the location shown here. Your latch pin should have come pre-assembled as shown with a jamb nut inside the plastic spacer. If not, assemble it as shown and tighten the nut against the spacer.
Using the included body washer over your tail section as shown, secure the latch pin in place and tighten securely with a 7/16" open end wrench. We highly recommend the use of loctite or a similar threadlock to assure latch pin will not work itself out with use.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#Y-660-R
Quad saddle for Yamaha Raptor 660
$379
Seating Panels
Side Panels
Welts
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
