 |
|
Cool looks and ridin' solo is what the Gunfighter saddle model is all about! Notice how we've removed the hand rails and integrated the shaping of the solo tail to the Triumph bodywork... like sculpted artwork! Up front, an ergonomically developed bucket has been designed to remove the downhill slope of the saddle which will greatly help to reduce fatigue. Naturally, Corbin's sculpted bucket shape fits your body better than the flat stock seat for more square inches of body contact and long lasting support.
In the back, we provide a tail section that is designed for a fastback, race cowling look that gives your bike a cool solo appearance. Inside, the Gunfighter tail is padded and upholstered just like the front area to allow for short trip passengers. This makes this saddle design extremely versatile. Even though the Gunfighter tail is built with the same quality foam components, don't expect your passengers to be comfortable for long hauls as the shaping is not designed for that. Good medium to short range support can be expected.
Up front, ergonomic sculpting provides a better fit to your body and improved weight distribution. Neutralized seating posture curbs the tendency to slide in the saddle, which helps to reduce rider fatigue. Notice how the Corbin design has taken out the downhill posture of the OEM seat. Built up with our Comfort CellŪ foam to provide a firm supportive ride mile after mile. To aid in ground reach, we've shaved the nose area of the seat narrower than the bucket to allow your legs clearance at stop signs. While riding, just slide back into the bucket for maximum support.
Like all Corbin saddles, this model includes genuine leather seating panels for a truly luxurious ride. To tie in nicely with the design of the Triumph we recommend the cover materials shown here which is: Carbon-Fiber laminated leather seating and Asphalt vinyl sides and tail section. The new asphalt material shown here looks perfect with the textured powdercoated chassis of the Triumph Sprint making a nice custom addition to your bike. Leather seating provides a perch that breathes with your body and will adapt with the foam shape during break in for a personalized fit. Over time, leather will mature to take on its own unique character, just be sure to care for it properly with a quality conditioner like our Saddle Cream.
Corbin's Gunfighter seat is designed to install easily on your bike and fit perfectly to the tank and tail section. We include a bracket with a stainless steel latch pin that installs on your bike using the same bolts as the Triumph hand rail. Once this bracket is installed, your saddle will mount with a tongue in the front and the built in lock at the rear. Please note this seat model was designed to work with the Triumph hand rails removed.
|
|
|
 |
 |
 |
 |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
 |
 |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. |
 |
 |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. |
 |
 |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info |
 |
 |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. |
 |
 |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more... |
 |
 |
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button. |
 |
Measurements |
Rider seating: 12" wide x 12 long x 6.5" deep Approx seat height: 31.5" |
|
|
 |
 |
 |
Measurements: |
Rider seating: 12" wide x 12 long x 6.5" deep Approx seat height: 31.5" |
 |
 | Installation Instructions: T-ST-1050-G |
 |
 | Installation: Corbin's Gunfighter saddle includes a special latch bracket that enables your saddle to install or remove on a built in key lock system for ease of use. |
 |
 | Just mount this bracket in place of the handrail as shown and secure with the stock screws. Now slide the saddle into place securing the front of the saddle with the nose tongue and lower the rear of the saddle onto the latch pin. To remove, just insert the key, turn it and lift off the saddle... easy! |
 |
 | The Gunfighter will not work with Triumph Bags due to the use of the grab rail. However, the Gunfighter and Lady will work with the Triumph Bags due to the cut-outs for the grab rail. |
|
|
 |
 |
 |
 #Conditioner Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
|
 |
|
|
 |
 |
 |
Testimonials: |
|
 |
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
 |
General Contacts |
|
|
|
 |
 |
 |
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
 |
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
 |
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
 |
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
 |
 |
|