Old School visuals that blend with the classic styling of the Boulevard, combined with Corbin's aerodynamic design. This stunning fairing looks great while giving excellent wind protection so you can go out and rack up mileage. Subtle details like the center rib makes it beautiful to look at. Another example of form and function expertly combined.
We've taken an approach similar to the common touring windscreen, but upgraded the design to provide better areodynamics. Notice how the shape of the fairing starts at the headlight and flows back to part the wind more gracefully. This transfers the highest pressure area rearward of the steering pin which gives much greater stability at speed (a kind of rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.
As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise which adds to the comfort value.
Constructed of our Fibertech material for a smooth clean finish and durability. Fleetliner fairing is then hand painted and pinstriped to coordinate with your stock paint scheme in either a single color or two-tone. Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided. Please note that taller windscreens are designed to be looked through rather than over, so they should not be smoke or dark in color. A wide variety of windscreens are availble via your local Harley-Davidson dealer, just ask to see the options available for a 1997-2006 Harley-Davidson FLHTC model fairing.
We've designed our fairing to work with the light bar available from Cobra USA (shown above). If you're interested in adding some road lights to your bike, just check with your local dealer or contact Cobra direct. The part number in question is: #04-0350. You can also find Cobra online at: CobraUSA.com The Fleetliner fairing will likely work with the Suzuki light bar as well, but we have not been able to test fit it yet.
Simple to install with complete directions and all required brackets included. To assure a perfect look on your Boulevard, brackets come painted to coordinate with bike and give a subtle appearance. Installation suitable for an average weekend mechanic.
Fibertech Construction
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
Finish
We use a quality gel-coat for a nice finish that doesn't show material weave. Comes to you prepainted in either a single color or two-tone to coordinate with your stock paint scheme.
Fleetliner Fairing is designed to mount up easily to your stock Suzuki front end. Simple installation with complete instructions and all required brackets included. Brackets are painted to blend in perfectly on your Boulevard.
The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree.
If you'd like to customize the amount of wind protection &/or looks of the Corbin Fleetliner, you can use a variety of windscreens available from your local Harley-Davidson dealer. Ask them to see options available for 1997-2006 Harley-Davidson FLHTC models.
If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing.
Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here. *Check 'em out...*
Specifically designed for Corbin Fleetliner fairings. This cool amplifier & speaker set accepts any audio source with a 3.5mm headphone jack. Convenient center mounted controls and quality weather resistant speakers provide great sound. Provides storage bay for device. *Check it out...*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Corbin Saddle
Naturally we make a Dual Touring saddle for your C109. You'll find it HERE.
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please enter paint color and year before adding to cart. We will verify all selections with you before starting production.
ITEM
DESCRIPTION
WINDSCREEN
PRICE
#S-C109R-FAIR-T
Fleetliner Fairing Two-Tone, 2008-2009 Boulevard C109 R
$1599
#S-C109R-FAIR-B
Fleetliner Fairing single color, 2008-2009 Boulevard C109 R
$1399
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Model Year
Paint Color
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
All Corbin saddles (with very little exception) include 
