Corbin's Classic Solo Saddle & Passenger Pillion gives your Boulevard a nostalgic look and excellent comfort value for both you and your passenger. Provides the use of our removable backrest for 14 inches of vertical back support in the rider's position. Our sculpted seating position gives maximized body contact and provides true touring comfort with a bucket that gives plenty of body support. Our neutralized seat platform offers an easier reach to the ground and a more ergonomic position on the bike.
For total touring support, we offer several styles of removable backrest that work in the Classic Solo. The Ovalbac® model backrest shown here is our model #02-S and provides the best blend of good looks and sculpted support. Ovalbac® models provide good support without trapping heat against your body... they also make a great hand hold while moving your bike around the garage. Simple to install, just slide the backrest shaft into the saddle and secure with the included setscrew. Backrest angle is adjustable to provide a tailored fit to your posture and adjustment is done without removing the backrest from the seat.
Corbin's rear seat easily bolts up along with the Corbin solo and keeps a sleek, vintage look with excellent capabilities for passengers. We build this model to look sly, but use our high density Comfort Cell® foam for a firm supportive ride. Our pillion is ergonomically engineered for better weight dispersion and support. Naturally it is built to match your Classic Solo for a totally integrated look. Our passenger pillion seat will work along with your stock front seat, but due to integration of the rider backrest hardware, the Corbin solo will not work with the stock pillion pad (sorry).
Both saddles and backrest are richly tailored with genuine leather seating panels and built with Corbin's Comfort Cell® foam. Our exclusive foam material is almost twice as firm as the stock foam to give you support that lasts and doesn't compress down over time. This "Closed Cell" foam will feel firm at first, but over the miles you will notice it doesn't compress down like the stock foam and continues to provide resilience for the long haul. Additionally, it will break in over time to provide a personalized fit to your posture.
Choose from a wide range of leather and decorating options (all included) for your new seat. Leather will provide a nice perch that breathes with your body and will break in along with the foam shape for a personalized fit. For an added bit of a nostalgic touch, specify Chrome Studs on your order like the model shown here (also at no additional charge). Corbin's backrest system works with or without a pillion saddle in place. Corbin pillion seats work with your Suzuki sissy bar if equipped.
If you prefer a totally solo look, you can run the Corbin Classic Solo seat without a passenger pillion. This looks very nice showing off that long flowing fender. Corbin's backrest is supported internally, so there are no unsightly backrest brackets to clutter up the clean look of your bike. The Corbin mounting bracket for the solo saddle will show slightly behind the saddle when pillion pad is not used. We supply the brackets pre-painted black for cleanest look.
If you opt for one of the Ovalbac® series backrests as shown here (model #02-S), you can further customize the look of you bike with rear finishing plate options. Made of ABS, our standard model has a leather look to it, but you can also choose a Carbon-Fiber look, Aluminum look or primer if you want to custom paint one. For just a little extra, we can provide a finishing plate pre-painted gloss black or a new Chromed steel model as shown. Please note, chrome back plates are only available for the model #02-S.
If you'd like to add a bit of storage to your Boulevard, check out our new glove box design that mounts to your Corbin backrest in place of the finishing plate! Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys. Click on over to the Glovebox page to learn more HERE.
Simple to install, both the solo seat and passenger pillion include all required mounting brackets. Solo saddle uses a bracket that bolts to your fender and integrated bracket on the saddle and also the two bolts into your frame at the front. Pillion pad bolts to your fender in stock locations and includes a new chrome button head bolt for the rear location. For an even cleaner installation, use our chromed billet thumbscrew in the rear. This looks very clean and can be installed or removed without tools. These thumbscrews can be used in a variety of applications wherever you want a dressier finish.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Measurements
Classic Solo seating: 15.5" wide x 15.5" long Back support w/ #02-S backrest: 14" Passenger Pillion: 11.5" wide x 12" long
Measurements:
Classic Solo seating: 15.5" wide x 15.5" long Back support w/ #02-S backrest: 14" Passenger Pillion: 11.5" wide x 12" long
Installation: Classic solo includes a mounting tab that bolts to your fender in a stock location. Simply mount tab as shown with included nylon washers under bracket and tighten securely (8 ft lbs). Solo seat will now slip into place rear first with integrated bracket on saddle sliding under fender mounted bracket. Lower front of saddle into place and secure to frame with original seat screws. Tighten to 8 ft lbs.
Pillion pad is held down in the front with two stock screws through the front mounting bracket into your fender. These bolts will also pass through the Corbin fender bracket or the rear mounting tab of your stock solo seat. Secure the rear of the pillion pad to your fender with the included 8mm bolt and nylon washer. For a cleaner installation, you can use our chromed billet thumbscrew #ACST-8M.
Corbin passenger pillion will work with your stock front seat. Corbin front seat will NOT work with the stock passenger seat.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
 
ITEM
DESCRIPTION
PRICE
#S-BLVD-5-S
Classic Solo saddle, Suzuki Boulevard C90
$429
#S-BLVD-5-P
Touring Pillion, Suzuki Boulevard C90
$239
Seating Panels
 
Side Panels
 
Welts
 
Stud Bands
 
Studs
 
Stitching
 
Special Notes
 
 
 
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.