The new wind management system from Corbin's design team is another
masterpiece! Specially engineered to provide adjustable wind protection for
different riding uses and rider stature. Simple to adjust and easy to
install, it blends well with the style of your Suzuki to add to the custom
appeal. Gracefully contours the front end following the lines of the bike
while creating wind protection for you at freeway speed. We even provide it
prepainted to coordinate with your stock color!
In this view, you can see how the placement of the fairing can adjust for
rider stature. Ideally you will want to dial in the fairing height to the
position that provides the best protection from wind and noise while still
allowing you to easily look over the top of the fairing. At higher speeds,
you will likely want to lower the fairing and get yourself behind it to
keep a smaller profile through the air. Conversely moving the fairing up
during poor weather will give you better protection from the elements.
The triple rib along the trailing edge is designed to create turbulence in
the laminar airflow which actually reduces wind noise and buffeting as the
wind reaches you. This makes the bike much more comfortable to ride at
higher speeds and for longer distances. Because of the unique design of the
Corbin fairing, we were able to bring the fairing closer to you which keeps
you in the slipstream and provides better protection. Along the top edge,
we've mounted a small bump pad to protect you in the case of accidental
contact. Naturally, we expect to coordinate this bump pad in the material
of your choice to coordinate with your Corbin saddle design. The model
shown here uses our standard black leather.
Placement of the Trimtab adjusting knob is front and center making it easy
to reach and adjust with either hand. You can even adjust the fairing
height while riding. Notice also how the included chrome & black brackets
are designed to fit in with the look of your front end for total
integration. Triple plate chrome brackets and adjusting arms look great and
are well suited to withstand the elements. Please note that although we
show the fairing moving by itself in some of the animations on this page,
it is NOT motorized and is adjusted by turning the Trimtab knob manually.
Notice how the top, trailing edge is the widest point of the fairing. This
is designed to direct wind pressure outwards and around your body. This
area of the fairing is also where the fairing curves upward at a greater
angle making it the area of highest pressure. Since this high pressure area
is behind the steering head, it has a tendency to act as a rudder and give
a steering stabilizer effect to the front end. The faster the bike moves,
the more pronounced this effect becomes.
Trimtab fairing and molded cover come prepainted. We do not offer a Trimtab
fairing in primer only, so if you're planning on a custom paint job, simply
order it in black. This way all of the painter prep work is done and it's
ready to go. Of course you have a wide choice of leather styles and colors
to choose from for the bump pad so please be sure to specify on the order
form. To take a look at the materials available, just click on the general
information button at the top of the page.
Although the Trimtab fairing appears simple in its design, there is a lot
of testing and behind the scenes engineering involved.
To see how it all works, just click on this image and we'll take you over to a page with more technical information (and the occaisional silly animation too).
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
We use a quality gel-coat for a nice finish that doesn't show material weave. Trimtab fairing comes prepainted to coordinate with your stock paint scheme (single color only).
Trimtab fairing has approximately five inches of travel when measured at the trailing edge. Adjust the slipstream to your stature and current riding conditions with a simple twist of the wrist.
Leather Bump Pad
To guard you in the case of accidental contact with the fairing, we provide a padded bump pad on the top edge. Choose from our wide range of material options for a custom look or coordinate it to your Corbin seat.
Average Width: 13" Width at widest point: 16" Height: 22.5"
Installation: Corbin's fairing comes to you ready to install with all components included except for a threadlock material (ie Loctite). Complete instructions included with fairing.
Average Width: 13" Width at widest point: 16" Height: 22.5"
Corbin's Trimtab fairing is developed and tested to work with the stock handlebars. Use of other bars may effect performance, especially with the use of wider bars.
We use a High-Temp Stainless lubricant on the adjuster when it is assembled. With normal use, it should not need to be re-lubricated.
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
CORBIN Saddle Models
We have three saddle models and our custom Beetle Bags available for your Boulevard. You can check out the index page HERE.
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
Trimtab fairing, painted. Suzuki Boulevard C90
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.