Front and Rear saddle for 2008 - 2009 Kawasaki ZX-10R
Corbin's saddle design greatly enhances the comfort of the ZX by ergonomically dispersing your weight over a greater area. Built up of Corbin's Comfort Cell® foam to provide miles and miles of supportive comfort for the sport touring enthusiast. Our exclusive foam material feels firm at first, but doesn't break down like the stock foam keeping your body supported indefinitely for day long riding enjoyment.
After an initial break-in period, Comfort Cell® foam will adapt to your body to provide an even greater degree of comfort and weight distribution. Additionally, the rider's seating position has been neutralized to reduce the tendency to slide towards the tank under braking. Notice also how the seat is shaped to provide support for your legs while your feet are on the footpegs, but is shaved in the nose area to allow good ground reach.
This bike also accepts a passenger saddle giving you coordinated copilot accommodations. We've built the rear seat up with our Comfort Cell foam to provide good resilience and designed a fast looking perch that integrates with the Kawasaki bodywork. This gives reasonable passenger comfort with outstanding looks. Sorry, but due to space limitations, we were unable to engineer a removable backrest into this model.
All components are engineered to fit perfect to the tank, chassis and tail section, our front solo saddle will also work with the stock rear seat if you prefer. Manufactured with a fibertech basepan for unsurpassed fit, Corbin's ZX seats ride on rubber bumpers to protect the motorcycle's paint job. To make installation easier our seats come ready to install with brackets pre-mounted on the saddle.
All Corbin saddles come standard with genuine leather seating inserts for a true touch of luxury. We've come up with a slick cover design that allows for custom or subtle looks depending on your preference. Above we show the front saddle decked out with Carbonium trim panel, Asphalt sides and with varying seating panels including: Charcoal Carbon-Fiber leather, Black Faux-Alligator leather & Green Faux-Alligator leather (to coordinate with the custom LED lighting on this particular bike). Rear seat is made to match with Carbonium sides and coordinated leather bump panel.
Leather seating will provide a surface that breathes with your body and will adapt with the foam during break in for a perfectly personalized fit. Just be sure to care for it properly with a quality leather conditioner like our Saddle Cream to help it age gracefully and remain weather resistant.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Measurements
Seating: Approx. 12.5" wide x 13" long Approx. seat height: 32" Passenger: 9" wide x 10.5" long
Measurements:
Seating: Approx. 12.5" wide x 13" long Approx. seat height: 32" Passenger: 9" wide x 10.5" long
Front saddle installs just like stock. Brackets are pre-installed on the seat so it's ready to go right out of the box.
Passenger seat includes bracket and latch hook to integrate with your Kawasaki key lock. Ready to mount.
NOTE: Due to space restrictions, we were unable to integrate the hardware for a passenger back rest.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#K-ZX10R-9-F
Front Saddle 2008-2009 ZX-10R
$259
#K-ZX10R-9-R
Rear Saddle 2008-2009 ZX-10R
$189
Seating Panels
Side Panels
Trim Panel
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
All Corbin saddles (with very little exception) include 
