 |
Newly Redesigned!Fleetliner fairing has been redesigned to eliminate the chrome strip and provide an even smoother air flow over the fairing and cleaner appearance. All other features are the same as shown above.
|
Old School visuals that blend with the classic styling of the Vulcan, combined with Corbin's aerodynamic design. This stunning fairing looks great while giving excellent wind protection so you can go out and rack up mileage. Subtle details like the center rib makes it beautiful to look at. Another example of form and function expertly combined.
We've taken an approach similar to the common touring windscreen, but upgraded the design to provide better aerodynamics. Notice how the shape of the fairing starts at the headlight and flows back to part the wind more gracefully. This transfers the highest pressure area rearward of the steering pin which gives greater stability at speed (a kind of rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.
As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise which adds to the comfort value.
Constructed of our Fibertech material for a smooth clean finish and durability. Fleetliner fairing is then hand painted and pinstriped to coordinate with your stock paint scheme in either a single color or two-tone. Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided.
Simple to install with complete directions and all required brackets included. To assure a perfect look on your Vulcan, brackets come painted to coordinate with bike and give a subtle appearance. Installation suitable for an average weekend mechanic.
|
|
|
|
|
|
 | Installation Instructions: KV-2-ST6-FAIR / KV2-YLYNFAIR |
 |
| Fleetliner Fairing is designed to mount up easily to your stock Kawasaki front end. Simple installation with complete instructions and all required brackets included. |
|
| The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree. |
|
| Accepts standard Harley-Davidson windscreens in a variety of styles and sizes if you'd like to customize your fairing. Ask a local shop about OEM & aftermarket windscreen options for the 1997 & up FLHTC models. |
|
| If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing. |
|
| We have two different fairing models available for the Vulcan 2000 depending on which model and year you have. If your bike has the chrome nacelle headlight (teardrop), you will need the KV-2-ST6-FAIR. Bikes with the round headlight take the KV2-YLNRFAIR. |
|
|
|
|
|
Windscreens |
Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here.
*Check 'em out...*
|
|
#Conditioner
Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
*More Info*
|
|
Corbin Saddles |
Naturally we make a wide range of saddle models for your Vulcan. Just check out the Vulcan index page for complete details. You'll find it HERE. |
|
|
|
|
|
Testimonials: |
|
|
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
|
General Contacts |
|
|
|
|
|
|
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
|
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
|
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
|
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
|
|
|
All Corbin saddles (with very little exception) include 
