 |
|
Another innovative, break-through technology from the Corbin wizards! Our Trimtab Fairing is specially engineered to provide adjustable wind protection for different riding uses and rider stature. Simple to adjust and easy to install, this fairing blends well with the style of your Vulcan. Trimtab gracefully contours the front end following the lines of the bike while creating wind protection for spirited riding. This feature was designed to help your bike slide through the wind rather than plow through it!
Not only does the Trimtab adjust for rider stature, but the adjustment feature also allows you to set the ideal height to take high-pressure wind off your face and chest while dialing in the most efficient position. Our highly aerodynamically efficient design allows your bike to move through the air mass easier which allows greater fuel economy and higher performance. Ideally you will want the fairing height set to the position that provides the best protection from wind and noise while still allowing you to easily look over the top of the fairing. At higher speeds, you will likely want to lower the fairing and get yourself behind it to keep a smaller profile through the air. Conversely moving the fairing up during poor weather will give you better protection from the elements.
The triple rib along the trailing edge is designed to create turbulence in the laminar airflow, which actually reduces wind noise, and buffeting the wind as it reaches you. This makes the bike much more comfortable to ride at higher speeds and for longer distances. Because of the unique design of the Corbin fairing, we were able to bring the fairing closer to you, which places you more in the slipstream. Along the top edge, we've mounted a small bump pad to protect you in the case of accidental contact. We coordinate this bump pad in the material of your choice to coordinate with your Corbin saddle design.
Placement of the Trimtab adjusting knob is front and center making it easy to reach and adjust with either hand. You can even adjust the fairing height while riding. Notice also how the included chrome & black brackets are designed to fit in with the look of your front end for total integration. Triple plate chrome brackets and adjusting arms look great and are well suited to withstand the elements. We also include a prepainted ABS cover for bar clamp brackets to give a very clean look. Please note that although we show the fairing moving by itself in animations on this page, it is NOT motorized and is adjusted by turning the Trimtab knob manually.
Notice how the top, trailing edge of the fairing is where it curves upward at a greater angle making it the area of highest pressure. Since this high-pressure area is behind the steering head, it has a tendency to act as a rudder and give a steering stabilizer effect to the front end. The faster the bike moves the more pronounced this effect becomes.
The Fairing and hardware cover come prepainted to coordinate with your stock paint job. We do not offer a Trimtab fairing in primer only, so if you're planning on a custom paint job, simply order it in black. This way all of the painter prep work is done and it's ready to go. Of course you have a wide choice of leather styles and colors to choose from for the bump pad so please be sure to specify on the order form.
|
|
|
|
|
|
 | Corbin's fairing comes to you ready to install with all
components included except for a threadlock material (ie Loctite). Complete instructions included with fairing. This fairing was developed and tested to work with the stock handlebars. Use of other bars may effect performance, especially with the use of wider bars. |
 |
| Average Width: 13"
Width at widest point: 16"
Height: 22.5" |
|
| We use a High-Temp Stainless lubricant on the adjuster when it is assembled. With normal use, it should not need to be re-lubricated. |
|
|
|
|
|
Testimonials: |
|
|
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
|
General Contacts |
|
|
|
|
|
|
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
|
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
|
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
|
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
|
|
|
All Corbin saddles (with very little exception) include 
