So Corbin has THREE seat choices for your KLR... are you getting a little confused? This may help clear things up a little bit: If you are looking to get the lowest seat possible to make your reach to the ground easier, THIS is the seat model for you! Our Dual Platform model gives seating lower than the stock seat and both other Corbin seat models.
We got a bunch of great feedback from our new pals over at Happy-Trail.com for a new saddle design to fit the KLR. Better still, they brought their new `08 down to the shop so we could check it out in person and get the skinny first hand. After some discussion, Mike Corbin and the Wizard's set about engineering this latest offering...
This stepped, dual platform design allowed us to really lower the front position of the saddle. This equates to better ground reach and, naturally, a lower center of gravity. A nice side effect of the stepped seating is that you get a nice bit of back support out of it too. Notice how we've taken this shape and sculpted it to conform to the shape of your body. This provides more square inches of body support and eliminates hot spots.
In the nose area we've drastically reduced the height of the seat. In fact, we literally can't make the nose of the seat any lower than it already is. But don't worry about comfort... although we've cut it down in front, there's still plenty of support and cushion under your rear and thighs while in the riding position. As with all Corbin saddles, we incorporate our Comfort Cell foam material to supply firm comfort for long days on the road (or trail as the case may be).
Shown in the images above, we use the "Grabber" material, which has been discontinued. We recommend using Carbon Fiber for the seating with Asphalt side panels. These materials help you stay planted on the bike. This combination of materials works well for the KLR's "go anywhere" environment as well as being extremely durable and visually perfect for any bike color.
If you're a taller rider or just don't have any problem with ground reach, you may want to check out our DISHED and FLAT seat models for the KLR instead.
Saddle installs much like your stock seat and bolts directly to the Kawasaki chassis. The only difference is the simple relocation of a vent hose on the fuel tank (complete instructions included).
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
Saddle installs like stock with two bolts into stock locations on your chassis. Mounting hardware is included and preinstalled on saddle.
Installation of the Corbin saddle on some models requires relocating the fuel tank vent tube to the inside location of the tank lip. This is a simple procedure and when complete your new saddle will mount just like stock. For more information, refer to the install instructions above. (figure 3).
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Shown in the images above, we use the "Grabber" material, which has been discontinued. We recommend using Carbon Fiber for the seating with Asphalt side panels. These materials help you stay planted on the bike. This combination of materials works well for the KLR's "go anywhere" environment as well as being extremely durable and visually perfect for any bike color.
ITEM
DESCRIPTION
PRICE
#KLR-HPY-T
Dual Platform saddle, 1987 - 2008 KLR
$379
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
