 |
|
Corbin provides incredible comfort gains for your sportbike. In the front, we've leveled the rider's platform for a better seating posture that helps curb the tendency to slide towards the tank under braking. In the long run, this helps to eliminate fatigue on your wrists and knees. For added support, we've widened the seating area which disperses your weight over a greater area, eliminating hot spots. The sculpted shape of the seating relieves pressure from your tailbone and supports your body more from the sides... you won't believe the difference this will make in your bike! For ground reach, the front saddle is slightly lower than stock and is rounded at the nose area.
For your passenger, we've also created a generous, sculpted seating position. Again, this increases the area of body contact for better weight distribution and longer range comfort. Our sculpted seating posture helps your passenger stay put in the seat rather than sliding forward into you. Corbin sacrificed a little bit of the seating length in order to provide for our much desired passenger backrest system. Corbin's optional backrest installs easily into hardware built inside the saddle and locks in with a single set-screw under the seat. Of course, it's adjustable to provide a tailored fit. Adjustment is easy, simply move the backrest to the desired angle and tighten the adjustment set-screw at the top of the mounting shaft.
A variety of optional backrest models are available to suit your taste and the amount of support desired. Shown above we've used the Ovalbac model #02-SB for a good combination of clean looks and passenger support. Naturally, the backrest can be made in the same materials as the saddle for a totally integrated look. Refer to the Accessories tab for all of your passenger backrest options.
Of course, both saddles and backrest include genuine leather seating for a luxurious ride. Leather seating breathes with your body and will break in along with the foam shape to conform to your personalized fit. Shown here we've used Carbon-Fiber leather seating with Asphalt vinyl side panels for a custom contrast. Using vinyl in the sides helps to support the foam shape and keep the saddle looking sharp.
All Corbin saddles are built up on our exclusive Comfort CellŪ foam that provides a firm supportive ride. Nearly twice as dense as your stock foam, Corbin Comfort CellŪ will support your body better and longer for more time in the saddle. Over time, the saddle will break in and take on your shape for a personalized fit. Corbin's rigid Fibertech baseplate supports the foam shape and keeps the carefully engineered ergonomics intact. Fits perfect to the chassis and bodywork for a truly custom touch. Mounting brackets come pre-installed on the saddle for easy installation.
If you're looking to add a bit of storage to your bike, check out Corbin's glovebox! Mounting to the rear of the Corbin backrest in place of the finishing plate, the Glovebox provides four liters of convenient locking storage. Just perfect for maps, gloves, bottled water and cell phones. For complete information, just check out the Accessories tab and click on Glovebox!
|
|
|
 |
 |
 |
 |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
 |
 |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. |
 |
 |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. |
 |
 |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info |
 |
 |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. |
 |
 |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more... |
 |
 |
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info... |
 |
Measurements |
Rider seating: 14.5" wide x 11" long Passenger: 10" wide x 11.5" long Approx seat height: 31.5" |
|
|
 |
 |
 |
Measurements: |
Rider seating: 14.5" wide x 11" long Passenger: 10" wide x 11.5" long Approx seat height: 31.5" |
 |
 |
Front seat mounts to your bike like stock and includes brackets preinstalled. |
 |
 |
Rear seat installs on your bike like stock and works on the Kawasaki key lock system. Brackets are included and premounted on seat. |
|
|
 |
 |
 |
 #Conditioner Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
|
 |
 #02-SB Standard Ovalbac® |
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
|
 |
 #297-SB Standard Backrest |
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
|
 |
 #02-L Large Ovalbac® |
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
|
 |
 #02-T Tee Ovalbac® |
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
|
 |
 #02-G Gunfighter Ovalbac® |
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
|
 |
 #GB Gunfighter Backrest® |
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
|
 |
 #GLOVE-BOX Glove Box |
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
|
 |
|
|
 |
 |
 |
Testimonials: |
|
 |
Submit Your Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM. |
 |
General Contacts |
|
|
|
 |
 |
 |
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
 |
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
 |
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
 |
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
|
|
|
 |
 |
|