The new wind management system from Corbin's design team is another masterpiece! Specially engineered to provide adjustable wind protection for different riding uses and rider stature. Simple to adjust and easy to install, it blends well with the style of your VTX to add to the custom appeal. Gracefully contours the front end following the lines of the bike while creating wind protection for you at freeway speed. We even provide it prepainted to coordinate with your stock color!

You can see how the placement of the fairing can adjust for rider stature. Ideally you will want to dial in the fairing height to the position that provides the best protection from wind and noise while still allowing you to easily look over the top of the fairing. At higher speeds, you will likely want to lower the fairing and get yourself behind it to keep a smaller profile through the air. Conversely moving the fairing up during poor weather will give you better protection from the elements.

The triple rib along the trailing edge is designed to create turbulence in the laminar airflow which actually reduces wind noise and buffeting. This makes the bike much more comfortable to ride at higher speeds and for longer distances. Because of the unique design of the Corbin fairing, we were able to bring the fairing closer to you which keeps you in the slipstream and provides better protection. Along the top edge, we've mounted a small bump pad to protect you in the case of accidental contact. Naturally, we expect to coordinate this bump pad in the material of your choice to coordinate with your Corbin saddle design. The model shown here uses our standard black leather.

Placement of the Trimtab adjusting knob is front and center making it easy to reach and adjust with either hand. You can even adjust the fairing height while riding. Notice also how the included chrome & black brackets are designed to fit in with the look of your front end for total integration. Triple plate chrome brackets and adjusting arms look great and are well suited to withstand the elements. Please note that although we show the fairing moving by itself in some of the animations on this page, it is NOT motorized and is adjusted by turning the Trimtab knob manually.

Notice how the top, trailing edge is the widest point of the fairing. This is designed to direct wind pressure outwards and around your body. This area of the fairing is also where the fairing curves upward at a greater angle making it the area of highest pressure. Since this high pressure area is behind the steering head, it has a tendency to act as a rudder and give a steering stabilizer effect to the front end. The faster the bike moves, the more pronounced this effect becomes.

Trimtab fairing comes prepainted. We do not offer a Trimtab fairing in primer only, so if you're planning on a custom paint job, simply order it in black. This way all of the painter prep work is done and it's ready to go. Of course you have a wide choice of leather styles and colors to choose from for the bump pad so please be sure to specify on the order form. To take a look at the materials available, just click on the general information button at the top of the page.

Although the Trimtab fairing appears simple in its design, there is a lot of testing and behind the scenes engineering involved.

To see how it all works, just click on this image and we'll take you over to a page with more technical information (and the occaisional silly animation too).

Fibertech Construction	Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
Finish	Trimtab fairing comes through prepainted to coordinate with your factory paint job and ready to install right out of the box.
Adjustable Travel	Trimtab fairing has approximately five inches of travel when measured at the trailing edge. Adjust the slipstream to your stature and current riding conditions with a simple twist of the wrist.
Leather Bump Pad	To guard you in the case of accidental contact with the fairing, we provide a padded bump pad on the top edge. Choose from our wide range of material options for a custom look or coordinate it to your Corbin seat.
Installation	Mounting the fairing is simple with all required hardware included. Chrome plated brackets look nice on the bike.

Measurements:	Average Width: 13" Width at widest point: 16" Height: 22.5"
	Installation Instructions: [Page 1] - [Page 2]
	We use a High-Temp Stainless lubricant on the adjuster when it is assembled. With normal use, it should not need to be re-lubricated.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*

Testimonials:
Submit Your Comments	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 General Mailboxes Hollister Factory Florida Showroom Online Service Center

Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.

	ITEM	DESCRIPTION	PRICE
	#H-VTX-F-TRIM	Trimtab Fairing for VTX, Painted	$1399
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
	Model Year
	Paint Color

   

	PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
	SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
	FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
	EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.