The new wind management system from Corbin's design team is another masterpiece! Specially engineered to provide adjustable wind protection for different riding uses and rider stature. Simple to adjust and easy to install, it blends well with the bold styling of your Rune to add to the custom apeal. Gracefully contours the front end following the lines of the bike while creating wind protection for you at freeway speed. We even provide it prepainted to coordinate with your stock color in Candy Black Cherry, Double Clear Black or Illusion Blue (for a little extra).
The double rib along the trailing edge is designed to create turbulence in the laminar airflow which actually reduces wind noise and buffeting as the wind reaches you. This makes the bike much more comfortable to ride at higher speeds and for longer distances. Because of the unique design of the Corbin fairing, we were able to bring the fairing much closer to you than other models on the market, which keeps you in the slipstream and provides better protection. Along the top edge, we've mounted a small bump pad to protect you in the case of accidental contact with the fairing. Naturally, we expect to coordinate this bump pad in the material of your choice to coordinate with your Corbin saddle design. The model shown here uses our Grey Faux-Snakeskin to match leather on our Fast Gun saddle.
In this view, you can see how the placement of the fairing can adjust for rider stature. Ideally you will want to dial in the fairing height to the position that provides the best protection from wind and noise while still allowing you to easily look over the top of the fairing. At higher speeds, you will likely want to lower the fairing and get yourself behind it to keep a smaller profile through the air. Conversly moving the fairing up during poor weather will give you better protection from the elements.
Placement of the Trimtab adjusting knob is front and center making it extremely easy to reach and adjust with either hand. You can even adjust the fairing height while riding if you choose. Notice also how the included chrome brackets are designed to fit in with the look of your Rune front end for total integration. Triple plate chrome brackets and adjusting arms look great and are well suited to withstand the elements. Please note that although we show the fairing moving by itself in the attached animation, it is NOT motorized and is adjusted by turning the Trimtab knob manually.
For a very clean look and simple installation, we've engineered our brackets to install easily into your stock front end components. At the front, we have a small bracket that acts as the hinge that bolts up in front of the triple clamp using the two bolts that hold the headlight housing. The rear bracket / adjustment assembly bolts on top of your handlebar clamp using four bolts. Basically, a very simple installation that can be handled by the average weekend mechanic.
As always, we are very pleased to bring out the latest developments and new products for the latest and greatest offerings from the motorcycle manufacturers. We know you're excited about your new Rune and we are extremely proud of the contributions to the elegant styling offered by Vince and Ricky in the Corbin R&D skunkworks. When ordering your Rune fairing, don't forget to choose the appropriate paint color and let us know what leather material you would like used for the bump pad. Happy Cruising!
Although the Trimtab fairing appears simple in its design, there is a lot
of testing and behind the scenes engineering involved.
To see how it all works, just click on this image and we'll take you over to a page with more technical information (and the occaisional silly animation too).
"I had the opportunity to ride a rune today with the Corbin fairing. Here are my impressions. The fairing is beautiful, blends with the bike and has a mechanism to raise and lower it that is incredibly clever, functional and practical. I have the windvest presently on my bike so I was able to make a good comparison. The Corbin fairing is a work of art. It blends with the bike. It disappears in the low position so you don't even see it. You feel that there is no blockage of your vision. However the wind is kept out of your chest. In the higher positions it blocks the wind from your face. I felt very secure behind the fairing and the range of adjustments allowed me to go from feeling like a naked bike to significant protection from the wind. Corbin has done an excellent job of designing and creating this fairing to blend with the natural beauty of this bike. I ordered the fairing immediately after experiencing the ride. Mike and his crew have done an incredible job of seeing the beauty of this bike."
Manufactured of our Fibertech material for durability and a clean finish.
Trimtab fairing comes through prepainted to coordinate with your factory paint job and ready to install right out of the box.
Mounting the fairing is simple with all required hardware included. Chrome plated brackets look nice on the Rune.
Trimtab fairing has approximately four inches of travel when measured at the trailing edge. Adjust the slipstream to your stature and current riding conditions with a simple twist of the wrist.
Leather Bump Pad
To guard you in the case of accidental contact with the fairing, we provide a padded bump pad on the top edge. Choose from our wide range of material options for a custom look or coordinate it to your Corbin seat.
Average Width: 12" Width at widest point: 17" Height: 18"
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Corbin's patented Rumble seat is the most versatile seat design availble for the Rune. Just a flip of the wrist converts the seat from a cool solo design to two-up with passenger backrest. Click HERE for complete info.
Dual Touring Saddle
Dual Touring saddle offers the most comfort available for two riders on the Rune. Dual sculpted buckets provide excellent weight dispersion with optional backrests availble for rider and passenger. Click HERE for complete info.
Fast Gun Saddle
Slick solo design flows with the body styling of the Rune for a very clean look. Sculpted bucket and optional rider backrest provides excellent long range comfort and support. Click HERE for complete info.
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
2360 Technology Parkway Hollister, CA 95023 800-538-7035
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.