You asked for it, you got it! Corbin comfort is now available for Honda's radical chopper! We know you fell in love with the Fury because of it's agressively styled, look and we've built this seat with that theme in mind. Slick styling that molds close to the chassis and over the fender yet provides comfort through ergonomic shaping. Now with the added vertical support of the Corbin backrest, this combo makes the Fury a long range solo cruiser (check back soon for passenger seating options currently in development).

As always, the Corbin backrest is supported via hardware concealed inside the saddle to maintain a clean look. Our backrest installs easily into the saddle and locks in with a single safety screw. Once installed, the angle of the backrest can be easily adjusted to your posture without removing the seat from the bike. Like the saddle, our backrests are sculpted to fit the shape of your body for maximum support without pressure points. Choose from a variety of backrest styles to suit your taste and the amount of support desired (#02-SB shown).

Corbin's sculpted design provides a greater area of body contact for excellent weight dispersion. This allows the seat to fit your body and offer longer lasting support. Our exclusive Comfort Cell^® foam material gives you a firm ride that supports your body weight indefinitely. You'll notice our saddle will feel firm to begin with, but it doesn't lose resilience like your stock seat does. Instead, Corbin's saddle will actually break in to take on your shape for a more personalized fit.

Built on a Fibertech basepan, Corbin's solo provides a perfect, flowing fit around the tank, chassis and fender, but rides on rubber bumpers to protect your paint job. Sculpted to allow ground reach when you're at a stop light, yet support your legs while in flight. This shaping flows into a fast back tail section that molds to your fender for a fast outta town look.

Comes standard with genuine leather seating in natural grain texture with Grey snake welts, Asphalt sides and tasteful stitch pattern. Custom material and color options available at no extra charge by special order. Leather seating works great on motorcycles because it breathes with your body and will conform with the foam shape during break in. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.

If you're looking to add a little storage space to your Fury, how about this cool new glovebox for the rear of your backrest (#02-S & #297 models only). Designed to carry four liters of your essential stuff like cell phones, spare gloves, bottled water, maps and sunglasses. Constructed of durable ABS and painted gloss black for a perfect finish. You can leave this mounted on your backrest full time or swap it with a regular finishing plate as needed. Installation is just two screws! Comes fully lined and weather stripped with two keys. Click on over to the Glovebox page to learn more HERE.

Corbin's solo is the perfect setup if you want your Fury to have a low, slammed look with a big improvement in comfort. Our saddle mounts easily using an integrated key lock system that works on included fender bracket. Passenger pillion seat available soon.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...

Measurements:	Rider Seating: Approx. 13.5" wide x 14" long Approx. Seat Height: 26.5"
	Saddle installs easily using two tongues in the front and an key lock system at the rear. All brackets are included.
	Once this bracket (included) is installed on the fender, the Corbin solo saddle will latch to the stainless steel pin and release easily with a key lock integrated into the side of the saddle.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
#02-SB Standard Ovalbac®	Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
#297-SB Standard Backrest	The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
#02-L Large Ovalbac®	Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
#02-T Tee Ovalbac®	This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
#02-G Gunfighter Ovalbac®	If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
#GB Gunfighter Backrest®	All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
#GLOVE-BOX Glove Box	A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*

Testimonials:
Submit Your Comments	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 General Mailboxes Hollister Factory Florida Showroom Online Service Center

Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.

	ITEM	DESCRIPTION	PRICE
	#H-FURY-S	Solo saddle for 2009-2013 Honda Fury	$429
	#02-SB	Ovalbac Leather Backrest (ea)	$229
	If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
	Seating Panels	Black Leather Asphalt vinyl Black Vinyl Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber leather Black Carbon-Fiber, hi-gloss Black Carbon-Fiber vinyl Black 'Ostrich' leather Black 'Shark' leather Black 'Snake' Blue Carbon-Fiber vinyl Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' leather Burgundy vinyl Carbonium Charcoal Gray vinyl Charcoal Carbon-Fiber vinyl Charcoal 'Snake' leather Chocolate Brown leather Classic (Basketweave) leather Candy Red vinyl Emerald Green vinyl Forest Green vinyl Ghost Gray vinyl Goldenrod vinyl Gray leather Gray Partner's leather Gray Partner's vinyl Gray 'Ostrich' leather Gray 'Snake' leather Harley Blue vinyl Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl R-80 Red vinyl Red Carbon-Fiber vinyl Royal Blue vinyl Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Gray vinyl Tan leather Tan 'Baby Alligator' Tan 'Ostrich' leather Taupe vinyl Teal vinyl Tomato Red vinyl White vinyl Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Side Panels	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pecan Pigeon Gray R-80 Red Red Leather Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Welts	Black No Welts Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Braid Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Lime Green Ninja Red Navy Blue Orange Otter Brown Oxblood Pecan Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Special Notes

	All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.

   

	PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
	SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
	FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
	EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.