Leave it to Honda to come up with the first Crossover motorcycle! Well, it didn't take the early adopters long to figure out a little comfort injection was needed for the DN-01. For all of its technical prowess and unique bodywork, the good folks at Big Red left a bit to be desired when it comes to the rump rest. Fortunately, we knew just what to do about that!

As usual, we start completely from scratch and create a basepan with our exclusive Fibertech base material that allows a perfect fit to every arc and contour of the DN-01 bodywork while being rigid enough to support the carefully designed foam shape. Fibertech also provides the structural integrity needed for our internal backrest support system.

Then we developed a concave seating surface that conforms to the shape of your body and eliminates pressure points. This spreads body weight over a greater area giving more square inches of body contact and support. Additionally, both positions are neutralized to curb sliding which reduces rider fatigue. As you can tell, this ergonomically designed shape provides a very nice visual effect that flows with the bike's sleek lines.

Corbin backrests (optional) are designed to install easily and lock in place with a single bolt. Built in angle adjustment allows our backrests to be tailored to your riding posture quickly and easily. Special hardware in the front position allows an extra adjustment to position the backrest fore-aft and provides spring loaded fold down functionality. Use a single backrest to transfer front to rear as needed, or order two backrests for full time use. Choose from a variety of backrest styles to suit your taste (we recommend Ovalback #02-SB as shown above). The design of this system actually has the rear seat providing backrest support for BOTH seating positions.

Naturally, Corbin backrests are tailored to match your new Corbin saddle and provide an integrated look. Models like the #02-SB provide contoured support and maximum amount of body support. These models also offer finishing plate options to further customize the look of your bike. Backrests come standard with a leather look ABS finishing plate that can be ordered custom in a variety of styles... even chrome or painted gloss black for a little extra.

For an added bit of luxury, we've designed the front and rear saddles with the option of electric heat! Simple to install with all components built into the saddles. You just have to install a simple wiring pigtail on your bike and enjoy the warmth. A great feature to have when you're taking off early in the morning to beat the traffic! Convenient switches are located on the left side of the saddle. Once on, the saddle will warm up and maintain temperature automatically though an integrated controller. Both front and rear seats are available heated (or non-heated) and have separate switches to control them.

Saddles use our exclusive high-density Comfort Cell foam that allows us to build a supportive saddle without a bulky shape. Corbin's Wizards are masters at combining form and function into a saddle that makes you as happy to look at as it does to ride on. On top, we include genuine leather seating in your choice of colors and styles. Shown here we use our standard natural grain black leather in the seating with Asphalt vinyl sides and Carbonium nose band. These choices provide a nice subtle bit of detail to the bike that coordinates with the bike.

Simple installation with all required brackets and hardware included. If you opt for heated seating, you need only integrate the supplied wiring pigtail with your fusebox and you'll be ready to roll. Complete instructions included. Please note, Corbin's front and rear seats will NOT integrate with stock front and rear seats.

Want to add some locking storage? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac model backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain black or prepainted (at additional cost). Check out the optional Glovebox via the Accessories tab.

	UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
	FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don't telegraph through the foam to your body. Click on the button at left to learn more...
	COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
	ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
	PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
	GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
	CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
	ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
	Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Measurements:	Rider seating: 15.5" wide x 13" long Back Support: 6" Passenger seating: 12" wide x 13" long
	Installation Instructions: H-DN01-F (-E) & H-DN01-R (-E)
	Front seat installs just like stock with two tongues at the front and two tabs at the rear. Rear tabs bolt to stock locations on the bike. We include new bolts to use in the rear tabs.
	Passenger seat mounts just like stock and includes brackets preinstalled on the saddle. Meshes with OEM key lock system.
	NOTE: Due to the incorporation of backrest hardware, Corbin's front and rear saddles do NOT integrate with stock components. Front and Rear seats are available separately to allow you to choose heated or non-heated for each.

#Conditioner Saddle Cream®	Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
#02-SB Standard Ovalbac®	Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
#297-SB Standard Backrest	The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
#02-L Large Ovalbac®	Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
#02-T Tee Ovalbac®	This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
#02-G Gunfighter Ovalbac®	If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
#GB Gunfighter Backrest®	All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
#GLOVE-BOX Glove Box	A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*

Testimonials:
Submit Your Comments	Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts	Hollister Factory: 2360 Technology Parkway Hollister, CA 95023 800-538-7035 Daytona Showroom: 1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332 General Mailboxes Hollister Factory Florida Showroom Online Service Center

Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.

	ITEM	DESCRIPTION	PRICE
	#H-DN01-F	Front Saddle no heater, 2009-2012Honda DN-01	$289
	#H-DN01-F-E	Front Saddle w/ Heat, 2009-2012Honda DN-01	$489
	#H-DN01-R	Rear Saddle no Heater, 2009-2012Honda DN-01	$259
	#H-DN01-R-E	Rear Saddle w/ Heat, 2009-2012Honda DN-01	$399
	#02-SB	Ovalbac Leather Backrest (ea)	$229
	If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
	Seating Panels	Black Leather Asphalt vinyl Black Vinyl Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber leather Black Carbon-Fiber, hi-gloss Black Carbon-Fiber vinyl Black 'Ostrich' leather Black 'Shark' leather Black 'Snake' Blue Carbon-Fiber vinyl Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' leather Burgundy vinyl Carbonium Charcoal Gray vinyl Charcoal Carbon-Fiber vinyl Charcoal 'Snake' leather Chocolate Brown leather Classic (Basketweave) leather Candy Red vinyl Emerald Green vinyl Forest Green vinyl Ghost Gray vinyl Goldenrod vinyl Gray leather Gray Partner's leather Gray Partner's vinyl Gray 'Ostrich' leather Gray 'Snake' leather Harley Blue vinyl Interceptor Blue vinyl KTM Orange vinyl Lavender vinyl Ninja Red vinyl Navy Blue leather Orange vinyl Otter Brown vinyl Oxblood vinyl Pigeon Gray vinyl R-80 Red vinyl Red Carbon-Fiber vinyl Royal Blue vinyl Silver Carbon-Fiber vinyl Sky Blue vinyl Smoke Gray vinyl Tan leather Tan 'Baby Alligator' Tan 'Ostrich' leather Taupe vinyl Teal vinyl Tomato Red vinyl White vinyl Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Side Panels	Black Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Ninja Red Navy Blue Orange Otter Brown Oxblood Pecan Pigeon Gray R-80 Red Red Leather Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Welts	Black No Welts Asphalt Black 'Alligator' (baby) Black 'Alligator' (large) Black Braid Black Carbon-Fiber Black Carbon-Fiber, hi-gloss Black 'Ostrich' Black 'Snake' Black 'Shark' Blue Carbon-Fiber Bomber Jacket leather Bomber Jacket BLACK Brown 'Alligator' Burgundy Carbonium Charcoal Gray Charcoal Carbon-Fiber Charcoal 'Snake' Chocolate Brown Classic (Basketweave) Candy Red Emerald Green Forest Green Ghost Gray Goldenrod Gray leather Gray Partner's Gray 'Ostrich' Gray 'Snake' Harley Blue Interceptor Blue KTM Orange Lavender Lime Green Ninja Red Navy Blue Orange Otter Brown Oxblood Pecan Pigeon Gray R-80 Red Red Carbon-Fiber Royal Blue Silver Carbon-Fiber Sky Blue Smoke Gray Tan leather Tan 'Baby Alligator' Tan 'Ostrich' Taupe Teal Tomato Red White Yamaha Charcoal Yellow Yellow Carbon-Fiber
	Special Notes

	All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel....   don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
	Warning! Heater elements (when available) should never be installed in motorcycle seats used by riders that cannot sense heat.

   

	PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
	SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
	FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
	EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.