|
|
1979-1983 Honda CB750, CB900 & CB 1100F
       |
 |
|
Two saddle styles are available for this model: Gunfighter offers a great solo saddle. Gunfighter & Lady offers a excellent ride for two. Gunfighter's fastback tail section gives the motorcycle a new attitude. The tail section is padded and upholstered to provide for short term passenger transportation.
Gunfighter & Lady offers sport touring comfort for you and your passenger with sculpted rider areas designed to give maximum comfort for greater riding enjoyment. Neutralized seating platforms help to enhance comfort. The Gunfighter & Lady saddle accepts an optional removable passenger rest for added comfort and security (requires hardware #OPL). Choose from a variety of styles to suit your taste.
Both models offer complimentary color coordination for a personal touch. Genuine leather seating is standard for a luxurious perch that breathes with your body. Leather is extremely durable when cared for properly and will break in along with the foam shape to give a personalized fit to your profile.
Note: These saddles do NOT fit Honda CB750 Custom motorcycles. |
The Honda tail section bolts onto Corbin saddle, but you must enlarge the holes to 1/4" (3.175mm). Mounts like stock by transferring side brackets from the stock seat. Assure they are mounted properly or saddle will not fit correctly. Note: These saddles do not fit the "K" models.
|
|
|
|
|
 |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
 |
 |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. |
|
 |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. |
|
 |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info |
|
 |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. |
|
 |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more... |
|
 |
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info... |
|
Measurements |
Rider seating: 12" wide x 17" long
Passenger: 11.5" wide x 9" long |
|
|
|
|
|
Measurements: |
Rider seating: 12" wide x 17" long
Passenger: 11.5" wide x 9" long |
|
 | The Honda tail section bolts onto Corbin saddle, but you must enlarge the holes to 1/4" (3.175mm). Mounts like stock by transferring side brackets from the stock seat. Assure they are mounted properly or saddle will not fit correctly. |
|
| These saddles do not fit the "K" models. |
|
| These saddles do NOT fit Honda CB750 Custom motorcycles. |
|
|
|
|
|
Apparel
Corbin Apparel |
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women!
*Show Me*
|
|
Biography
Corbin's Story |
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story!
*Excerpts*
|
|
#Conditioner
Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
*More Info*
|
|
#02-SB
Standard Ovalbac® |
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome!
*More Info*
|
|
#297-SB
Standard Backrest |
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired.
*More Info*
|
|
#02-L
Large Ovalbac® |
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome).
*More Info*
|
|
#02-T
Tee Ovalbac® |
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear.
*More Info*
|
|
#02-G
Gunfighter Ovalbac® |
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear.
*More Info*
|
|
#GLOVE-BOX
Glove Box |
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too!
*More Info*
|
|
|
|
|
|
|
Product Questions |
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day. |
|
Post Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE. |
|
Install Issues? |
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting Need replacement brackets, hardware or instructions? Write to us here:
Tech Support |
|
Hollister Rally INFO |
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE. |
|
Quick Links |
| F.A.Q. |
This is a good place to start for general product questions. |
| Material Selection |
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer. |
| Glossary |
Trying to order a seat but don't know a welt from a stud band? Don't feel bad, just go here to review. |
| Care & Feeding |
So you received your new Corbin saddle, now what? Take good care of the seat and the seat will take good care of you. |
| Service Center |
Track an open order, register your saddle, get warranty service... |
|
|
General Contacts |
| Hollister Factory: |
2360 Technology Parkway
Hollister, CA 95023
800-538-7035 |
| Ormond Showroom: |
1433 North US HWY 1
Ormond Beach, FL 32174
800-223-4332 |
| General Mailboxes |
corbin01@corbin.com
daytona@corbin.com |
|
|
Stay Up to Date |
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes! |
|
|
|
|
|
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
|
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
|
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
|
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
|
|
|
|
|
|
|
|
