Gunfighter & Lady Harley-Davidson Sportster Standard
This saddle provides clean, flowing lines with comfort built-in for two. Gunfighter & Lady is designed for excellent back support and proper weight distribution to provide you and a passenger with day long comfort. We've engineered the seating platform to provide more lateral support and relieve the centralized pressure caused by the stock saddle. You and a passenger can spend many happy hours on your Sportster with this seat.
The entire saddle is built up with our exclusive Comfort Cell® foam to provide a firm supportive ride that lasts. Our closed cell foam is nearly twice as firm as stock to give you long range comfort. Comfort Cell® also allows us to provide a sculpted position that fits you ergonomically providing more square inches of support. Naturally, it is designed to work with the Corbin removable backrest in both the rider and passenger positions. Corbin's rests are fully adjustable to provide a tailored fit to your posture.
Corbin backrests install easily with a single set screw locking them into lace in the saddle. Internal hardware supports the rest without the use of unsightly external brackets. Our Gunfighter & Lady model has a special hardware built into the rider's position that allows it to be positioned fore and aft to suit your stature and will fold down to ease mounting the bike. Spring loaded hardware returns the backrest to the upright position fter you've swung your leg over. Adjust the position of backrest easily with a set screw accessed from the top (see special notes below).
Gunfighter & Lady is the two-up evolution of our world famous Gunfighter design. Nice, clean lines that flow with the shape of the tank yet give enhanced comfort through ergonomic shaping. Sculpted seating supports your posterior, but is shaped narrower in the nose to allow good ground reach. Corbin's rigid Fibertech basepan fits perfectly to the tank and all contours of the chassis and fender. Installation is a snap using a single screw into your fender. For tool free installation, use one of our chromed billet thumbscrews (#ACST).
The saddle will use a single backrest transferred front to back as needed or you can order two for full time use. We have a variety of styles available to suit your taste, but we recommend the #02-S model Ovalbac® as shown here. For an extra custom touch, we offer a variety of finishing plate options for the rear of the backrest. Standard finishing plate is a leather look ABS, though we also offer a Carbon Fiber look, Aluminum look or primer (for custom painting). If you really want to dress things up, for a little extra we can provide a plate painted Gloss Black or in Chromed steel.
Gunfighter & Lady saddle will also work with a variety of Harley-Davidson sissy bar models if you prefer (not shown). Naturally you can still use a Corbin backrest in the rider position with a sissy bar at the rear. If you prefer a slimmer look to your backrest, we offer a #02-G model as shown here. This still gives you excellent back support with a total contact patch of 8" x 8" with less mass visually. Of course you still have a range of backing plate options except for the chrome model.
As with all Corbin saddles, we include genuine leather seating in your choice of colors and styles. Leather seating is great because of its durability and ability to breathe with your body. Over time, it will break in along with the foam shape providing a personalized fit to your posture. Coordinated vinyl side panels complete the look and keep the saddle shape tight. Care for your leather saddle with a quality conditioner like our Saddle Cream to keep the leather supple and weather resistant. With good care, over time your new seat will develop its own unique character just like your leather jacket.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Measurements
Rider seating: 11.5" wide x 15.5" long Passenger: 6.75" wide x 10.5" long Approx seat height: 27"
Measurements:
Rider seating: 11.5" wide x 15.5" long Passenger: 6.75" wide x 10.5" long Approx seat height: 27"
Installation is simple with a tongue in the front and a single screw into your fender at the rear. Seat tab uses the stock location in your fender. For tool-free installation, we offer a chromed billet thumbscrew that also makes a very clean install.
To adjust backrest position, simply fold down the spring loaded hardware and install the appropriate set screw. There is a special opening in the cover designed specifically for this purpose. Adjustment hole is covered with a leather flap that matches your saddle design.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-XL-ST-4-GL
Gunfighter & Lady saddle, Sportster Standard
$399
Seating Panels
Side Panels
Welts
Stitching
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
