The world famous Gunfighter design combines rider comfort and a fast look available in two variations for rider's of different stature. Up front an ergonomically contoured saddle provides a large area of body contact for best weight dispersion. Features a fastback tail section that is padded and upholstered to provide for short trip passengers while providing the rider with lower back support. Our "Close" version has a seating area built closer to the bars with a narrower nose to give better ground reach.
Both Models of the Gunfighter design accept our removable rider's backrest in a variety of styles. The special hardware in this setup allows for multiple adjustments to tailor it's fit perfectly to your posture. You can adjust the position fore & aft while also changing the backrest angle. It's even spring loaded so it will fold down to make it easier to mount your bike.
Our backrests install easily into hardware concealed in the saddle so there are no unsightly brackets to clutter up the look of your bike. Notice how the cool tail section follows the contour of the fender even with backrest functionality built in! We offer a variety of backrest styles to suit your taste and the amount of support you wish. At the top of this page we show the model #02-G Gunfighter Ovalbac backrest and the #02-S Standard model (slightly larger). Naturally, removing the backrest as desired is simple with just a single screw.
All components feature genuine leather seating for a perch that breathes with your body and breaks in with the foam shape for a personalized fit. Choose from a variety of leather styles to customize the look of the saddle. Here we show one built with Black Faux-Alligator seating, smooth black sides and a Black Faux-Snakeskin tail... naturally, a more stealthy all smooth black saddle is also available. Also, you can click on the animation at right to see how a standard Gunfighter and CLOSE Gunfighter compare.
For an added custom touch, our Ovalbac backrests have removable finishing plates on the rear. Our standard plate is an ABS material with a leather look. You can also choose from Carbon-Fiber look, Aluminum look or one that can be painted so you can have it customized. For a little extra, we can also supply one that is painted Gloss Black or a Chromed steel model (shown). This goes nicely with bikes that have a lot of chrome bits on them already. Please note: the chrome backing plate is only available on #02-S models.
Gunfighter saddle installs on your bike easily with a tongue in the front and our new key lock system. We supply a stainless steel latch pin that screws into your fender in a pre-existing location. Key lock mechanism comes preinstalled on the saddle to keep things real simple. Just slide it into place and latch it down... remove with a twist of the included key.
Genuine leather will provide you with a very nice ride for many years to come as long as you care for it well. Over time, the leather will develop its own unique character just like your leather jacket does. Regular conditioning with a quality leather product like our Saddle Cream will help to keep the hyde supple and water resistant for years. Be sure to avoid cleaners that contain petroleum or kerosene as they will damage the hide over time.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Gunfighter Seating: Approx. 12.5" wide x 16" long Close Gunfighter: Approx. 12.5" wide x 14.5" long Approx seat height: 27"
Measurements:
Gunfighter Seating: Approx. 12.5" wide x 16" long Close Gunfighter: Approx. 12.5" wide x 14.5" long Approx seat height: 27"
Installation: All components needed for installation are included with your Gunfighter saddle. Installation is quick and simple with our latch pin replacing a screw into your fender. Includes spare key.
If you are having a hard time getting the saddle to latch onto the pin, it is because the rubber bumpers are still a little stiff... they will relax with use. In the mean time, you can put a washer under the latch pin where it screws into the fender insert. This will, in effect, raise up the latch pin by the thickness of the washer and make it easier to latch the saddle.
Sorry, Gunfighter saddle will not work with stock sissy bar.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-XL-ST-4-G
Gunfighter Saddle, Sportster Standard
$399
#HD-XL-ST-4-CG
CLOSE Gunfighter sadde, Sportster Standard
$399
Seating Panels
Side Panels
Welts
Tail Section
Stitching
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
