This saddle model provides clean, flowing lines with comfort built-in for two. Gunfighter & Lady is designed for excellent back support and proper weight distribution to provide you and a passenger with day long comfort. We've engineered the seating platform to provide more lateral support and relieve the centralized pressure caused by the stock saddle. You and a passenger can spend many happy hours on your Sportster with this seat. Available in a standard and CLOSE model for easier reach.
Entire saddle is built up with our exclusive Comfort Cell foam to provide a firm supportive ride that lasts. Our closed cell foam is nearly twice as firm as stock to give you long range comfort. Comfort Cell also allows us to provide a sculpted postition that fits you ergonomically providing more square inches of support. Naturally, it is designed to work with the Corbin removable backrest in both the rider and passenger positions. Corbin's rests are fully adjustable to provide a tailored fit to your posture.
CLOSE model provides seating nearly two inches closer to the bars. This model also has a slightly narrower nose to allow an easier reach to the pavement. The perfect solution for riders with reach issues on the Sporty models. In the comparison image shown above, the model rider shown is 5' 6".
Our backrests install easily with a single set screw locking them into place in the saddle. Internal hardware supports the rest without the use of unsightly external brackets. Our Gunfighter & Lady model has a special hardware built into the rider's position that allows it to be positioned fore and aft to suit your stature and will fold down to ease mounting the bike. Spring loaded hardware returns the backrest to the upright position after you've swung your leg over. Adjust the position of backrest easily with a set screw accessed from the top.
Gunfighter & Lady is the two-up evolution of our world famous Gunfighter design. Nice, clean lines that flow with the shape of the tank yet give enhanced comfort through ergonomic shaping. Sculpted seating supports your posterior, but is shaped narrower in the nose to allow good ground reach. Corbin's rigid FibertechTM basepan fits perfectly to the tank and all contours of the chassis and fender. Installation is a snap using a single screw into your fender. For tool free installation, use one of our chromed billet thumbscrews (#ACST).
Saddle will use a single backrest transferred front to back as needed. We have a variety of styles available to suit your taste. Please note that on this seat model, most passengers do not like the RIDER backrest installed as it hits their legs. For this reason we recommend only a single backrest.
For an extra custom touch, we offer a variety of finishing plate options for the rear of the backrests. Standard finishing plate is a leather look ABS, though we also offer a Carbon Fiber look, Aluminum look or primer (for custom painting). If you really want to dress things up, for a little extra we can provide a plate prepainted Gloss Black or in Chromed steel (#02-S models only). Gunfighter & Lady also works with the Harley-Davidson detachable sissy bar if desired.
As with all Corbin saddles, we include genuine leather seating in your choice of colors and styles. Leather seating is great because of its durability and ability to breathe with your body. Over time, it will break in along with the foam shape providing a personalized fit to your posture. Coordinated vinyl side panels complete the look and keep the saddle shape tight.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
Measurements
Rider seating: 12" wide x 15" long
Close seating: 12" wide x 13" long
Passenger: 9" wide x 11" long
Approx seat height: 27.5"
Measurements:
Rider seating: 12" wide x 15" long
Close seating: 12" wide x 13" long
Passenger: 9" wide x 11" long
Approx seat height: 27.5"
Installation is simple with a tongue in the front and a single screw into your fender at the rear. Seat tab uses the stock location in your fender and is adjustable to assure a perfect fit. For tool-free installation, we offer a chromed billet thumbscrew that also make a very clean install.
To adjust backrest position, simply fold down the spring loaded hardware and install the appropriate set screw. There is a special opening in the cover designed specifically for this purpose. Adjustment hole is covered with a leather flap that matches your saddle design.
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-XL-CU-7-GL
Gunfighter & Lady, 2007-2012 Sporster w/ 4.5 gallon tank
$399
#HD-XL-CU-7-CGL
CLOSE Gunfighter & Lady, 2007-2012 Sporster w/ 4.5 gallon tank
$399
#02-SB
Ovalbac Leather Backrest (ea)
$229
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
Seating Panels
Side Panels
Welts
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
