|
|
Gunfighter & Lady for 1982 - 1995 Sportster
       |
 |
|
This saddle provides clean, flowing lines with comfort built-in for two. Gunfighter & Lady is designed for excellent back support and proper weight distribution to provide you and a passenger with day long comfort. We've engineered the seating platform to provide more lateral support and relieve the centralized pressure caused by the stock saddle. You and a passenger can spend many happy hours on your Sportster with this seat.
The entire saddle is built up with our exclusive Comfort Cell® foam to provide a firm supportive ride that lasts. Our closed cell foam is nearly twice as firm as stock to give you long range comfort. Comfort Cell® also allows us to provide a sculpted position that fits you ergonomically providing more square inches of support.
Gunfighter & Lady is the two-up evolution of our world famous Gunfighter design. Nice, clean lines that flow with the shape of the tank yet give enhanced comfort through ergonomic shaping. Sculpted seating supports your posterior, but is shaped narrower in the nose to allow good ground reach. Corbin's rigid Fibertech basepan fits perfectly to the tank and all contours of the chassis and fender. Installation is a snap using a single screw into your fender. For tool free installation, use one of our chromed billet thumbscrews (#ACST).
As with all Corbin saddles, we include genuine leather seating in your choice of colors and styles. Leather seating is great because of its durability and ability to breathe with your body. Over time, it will break in along with the foam shape providing a personalized fit to your posture. Coordinated vinyl side panels complete the look and keep the saddle shape tight. Care for your leather saddle with a quality conditioner like our Saddle Cream to keep the leather supple and weather resistant. With good care, over time your new seat will develop its own unique character just like your leather jacket.
Gunfighter & Lady saddle will also work with a variety of Harley-Davidson sissy bar models if you prefer (not shown). Works with stock tank or the optional large 3.2 Gallon tank shown above. When installed with the traditional smaller "Peanut" tank, there will be space between the nose of the saddle and the tank.
|
|
|
|
|
|
 |
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1. |
 |
 |
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button. |
|
 |
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works. |
|
 |
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info |
|
 |
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more... |
|
 |
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away. |
|
Measurements |
Rider seating: 12" wide x 16" long
Passenger 11" wide x 10" long |
|
|
|
|
|
Measurements: |
Rider seating: 12" wide x 16" long
Passenger 11" wide x 10" long |
|
 | This saddle does not work with the Roadster model Sportsters. |
|
| If you have a 1996 model with the larger fuel tank common to the 1200 Sportster, you actually need our saddle #XL96-GL. You can find it right HERE. |
|
|
|
|
|
Biography
Corbin's Story |
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story!
*Excerpts*
|
|
#Conditioner
Saddle Cream® |
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application.
*More Info*
|
|
#ACST
Billet Thumbscrew |
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
|
|
|
|
|
|
|
Product Questions |
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day. |
|
Post Comments |
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE. |
|
Install Issues? |
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting Need replacement brackets, hardware or instructions? Write to us here:
Tech Support |
|
Hollister Rally INFO |
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE. |
|
Quick Links |
| F.A.Q. |
This is a good place to start for general product questions. |
| Material Selection |
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer. |
| Glossary |
Trying to order a seat but don't know a welt from a stud band? Don't feel bad, just go here to review. |
| Care & Feeding |
So you received your new Corbin saddle, now what? Take good care of the seat and the seat will take good care of you. |
| Service Center |
Track an open order, register your saddle, get warranty service... |
|
|
General Contacts |
| Hollister Factory: |
2360 Technology Parkway
Hollister, CA 95023
800-538-7035 |
| Daytona Showroom: |
1433 North US HWY 1
Ormond Beach, FL 32174
800-223-4332 |
| General Mailboxes |
Hollister Factory
Florida Showroom |
|
|
Stay Up to Date |
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes! |
|
|
|
|
|
 |
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
|
|
 |
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
|
|
 |
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number. A note about paint color matching, Please Read
|
|
 |
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
|
|
|
|
|
|
|
|
All Corbin saddles (with very little exception) include 
