Fleetliner Saddlebags for Harley-Davidson FXST Softail
Fleetliner bags... a traditional shape with Corbin design flair. We've taken a cavernous 46.5 liters of storage and smoothed out the lines to visually integrate the saddlebags into the Softail look. Typical of Corbin engineering, the interior wall of the bag molds close to the profile of the bike to fit closer to the centerline than any other saddlebag on the market. This provides better load bearing, better balance, less width and a cleaner look. Like we always say... Form AND Function!
Corbin saddlebags are tooled up specially for each bike model so they're visually integrated. The flowing shape provides a bit of a Hot Rod flair and a look far cleaner than "one shape fits all" hard luggage. Both bags feature top loading so contents can't spill out when opened and they will self close in the wind if forgotten. Notice how the Corbin mounting system keeps the bags close to the bike. We mold them around the fender rails and in tight to the fender. This allows the bags to carry weight in close for a better center of gravity and good balance. This design also keeps a narrower profile for less width to worry about when lane splitting.
Although we've designed them to fit very close to the fender and chrome strut, we've left just enough room for a sissy bar to mount. With a set of Fleetliner bags and a Dual Touring saddle, you'll be set to go touring on your new Softail. Also shown in the images above, we offer a Streamlined trunk that will work with the Corbin bags instead of a sissy bar. The Corbin trunk provides generous back support for your copilot and an additional 55 liters of locking, weatherproof storage. For more trunk info, click HERE.
Our design team shaped these bags to work with your stock exhaust system, but they will work equally well with any system that has a profile lower than the stock pipe. Beetle Bags fit perfect and install simply with all brackets included. In the front, our bags are shaped to allow room for passengers legs on the rear footpegs. Interior wall fits the shape of the bike to keep them narrow and carry the shape around the rear fender. When loaded properly the bike remains stable at all speeds.
Both bags come completely lined to protect your cargo and feature locking doors for security. Molded recesses on the outside edges of the bags are designed to work with your stock turn signals. Manufactured of our durable Fibertech
material, Fleetliner bags are available in primer or prepainted Gloss Black and ready for immediate installation. Bag lids use our new RTM process so they're more rigid and finished inside and out. Corbin's saddlebags do not mount with the stock seat on Softail models with the 200 series rear tire. These bags WILL work with the CVO style seat with chrome sides.
Capacity: So what exactly does 46.5 Liters mean anyway? Just to give you an idea, we took some measurements and compared these bags to those made by Harley-Davidson for the FLH models (Electra-Glide, Street Glide, Road King and Road Glide). We know it doesn't seem like a fair comparison considering the size of the bikes, but look how it shakes out...
Corbin Fleetliner Bags Capacity: 46.5 liters each
Stock HD Hard Bags Capacity: 26 liters each
That's right, although the Corbin Fleetliner bags appear smaller than the H-D Dresser models they actually hold quite a bit MORE. And they look size appropriate on a Softail!
Fibertech Construction
Manufactured of our Fibertech material for durability and a clean finish. Designed to last for years!
Finish
Available in either primer gel-coat (ready for your painter's preparation) or prepainted gloss black and ready to install right out of the box.
Interior
Saddlebag set comes fully lined with weather stripping installed to keep contents out of the weather. Door locks also come preinstalled with two keys.
Measurements
Corbin Fleetliner Bags Capacity: 46.5 liters each
Stock HD Hard Bags Capacity: 26 liters each
Measurements:
Corbin Fleetliner Bags Capacity: 46.5 liters each
Stock HD Hard Bags Capacity: 26 liters each
Fleetliner bags work with your stock exhaust system or a variety of aftermarket pipes. If you are using an aftermarket set of pipes, please assure they mount no higher than the original system did.
Installation Instructions: [Page 1] - [Page 2]
Installation is simple using hardware and brackets that are included with the Fleetliner saddlebag set. Stainless steel mounting studs and a chromed lower bracket install easily with common tools. Installation is perfectly suitable for a weekend mechanic. Complete instructions included.
Sorry, Corbin's saddlebags do not mount with the stock seat on Softail models with the 200 series rear tire. These bags WILL work with the CVO style seat with chrome sides.
Installation of the Corbin saddlebags relocates your rear turn signals to the outside edges of the bags. Although many aftermarket turn signals may also work, they have not been tested with any specific models.
When loading heavy items into the bags, be sure to place them in carefully. "Thowing" heavy items like disc locks into the bags can create cracks or stress marks in the paint on the outside.
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
All Corbin saddles (with very little exception) include 
