Now available from Corbin's Workshop of Wizards is this outstanding Classic style Solo Saddle with a variety of passenger pillion options for your Roadking Custom. Designed to provide maximum rider comfort combined with a classy, nostalgic look. Provides the use of our removable rider's backrest for over 14 inches of vertical back support. Our sculpted seating position gives maximized body contact and provides true touring comfort with a bucket that gives plenty of lower support. Our neutralized seat platform offers an easier reach to the ground and a more ergonomic position on the bike.
Corbin's removable rider backrest is simple to install and adjusts easily to your riding posture. Slide the backrest shaft into the internal hardware of the Classic Solo and lock it in place with a single bolt. You can then set the backrest position to your preferred setting and lock it in place with the easily accessible adjustment screw... no need to remove the saddle to accomplish this. Choose from a variety of backrest styles to suit your taste although we recommend the #02-S Ovalbac for a good combination of looks and support. A range of finishing plate options is available for the rear of the backrest to further customize the look.
For maximized passenger comfort, we offer a touring style pillion seat for your Roadking. Designed to work with the variety of trunk models and sissy bar or luggage rack backrests available for your 'King. Wide, sculpted seating position gives excellent body support with a wide contact patch. This will eliminate hot spots and increase your passenger's riding range (that means no more annoying rest breaks while you're out racking up the mileage!) All Corbin pillion pad models will work with or without the rider's backrest in the solo seat and come decorated to coordinate with your solo.
For a more sly and vintage look we offer a 50's style pillion pad. This keeps a low profile and clean look on your bike but still provides for passenger transportation. Built up with our exclusive Comfort Cell® foam for firm support that lasts despite the slim lines. Bolts up directly with the Corbin Classic Solo for simple install. Will also work in conjunction with your Harley-Davidson passenger backrest or trunkrest option if installed.
For ultra-cool solo looks, you can run the Corbin Classic Solo Saddle by itself without a pillion seat. This allows you to show off that slick rear fender and still provides for use of the Corbin backrest if desired. To add to the custom, nostalgic look, we offer chrome V-Rail that bolts up with the Classic solo. Triple plate chroming gives a show quality finish. Another slick option for your saddle setup is the variety of finishing plates offered for the rear of the Ovalbac series backrests. Along with our standard leather look ABS models, we offer a carbon-fiber look, brushed aluminum look, paintable or for a little extra you can get one prepainted gloss black or our new chromed steel model shown here! An excellent touch!
Choose from a range of leather styles and colors for a custom touch on your new seat. Leather will provide a perch that breathes with your body and will break in along with the foam shape for a personalized fit. Be sure to care for your leather saddle with a quality conditioner like our Saddle Cream. With proper care, your seat will age gracefully developing a unique character and will be your riding buddy for years. Optional chrome studs provide an added nostalgic touch (included at no charge, just specify). You may also notice that we've incorporated a new mounting system on this model that uses a key lock. This makes it extremely simple to install and remove the seat as desired.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
MODULAR SEAT SYSTEM: This component is part of Corbin's patented modular seat system (US Patent #7,556,114). Engineered to work in a variety of configurations to provide maximum versatility on your motorcycle. A typical modular seat system consists of: Rider seat, Passenger seat, Smuggler trunk & Corbin backrest. Click the button to see how it all works.
Measurements
Classic Solo seating: 13.5" wide x 18" long
Approx. Seat height: 28"
Touring Pillion: 13" wide x 12.5" long
50's Pillion: 8.5" wide x 10" long
Measurements:
Classic Solo seating: 13.5" wide x 18" long
Approx. Seat height: 28"
Touring Pillion: 13" wide x 12.5" long
50's Pillion: 8.5" wide x 10" long
Latch Pin Installation Instructions: [Page 1] Corbin's Classic Solo mounts with a new key lock system. We include a latch pin and bracket that installs onto your chassis. The saddle is then mounted with a tongue in the front and the latch pin at the rear. To remove simply turn the key and lift off the saddle.
To install any pillion model, just slip the front mounting tongue under the Corbin solo and secure the rear of the seat to your fender in the stock location. For simple, tool free installation, use one of our chromed Billet Thumbscrews (#ACST).
Corbin pillion pads are designed specifically for use with the Corbin Solo Saddle and will not work with other brand solo seats.
The Harley-Davidson SOLO tour pac (part #53260-02) does NOT work with the Corbin solo seat on Roadkings, FLH or Road Glides.
Corbin's Chrome V-Rail bolts up easily to your Classic Solo saddle with no additional brackets so installation is very clean. Triple-plate chromed for a show quality finish, the V-Rail provides a nice nostalgic look for your bike and simple installation. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-RKF-4-CUS
Classic Solo Saddle
$429
#RKR-97
Touring Pillion Pad
$239
#RK-50S-97
50's Style Pillion Pad
$199
#02-SB
Ovalbac Leather Backrest (ea)
$229
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
Seating Panels
Side Panels
Welts
Stud Bands
Studs
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
