The most convenient and versatile seat design available! In the lowered position, Corbin's patented Rumble Seat provides a very cool, solo look... but a flip of the wrist reveals a comfortable passenger platform complete with backrest. Corbin's new spring indexed hinge design keeps the backrest firmly in the up or down position as needed without tools or tension knobs. This new mechanism is like having a complete sissy bar assembly contained inside the saddle where it doesn't clutter up the look of your bike... Yeah, it's "like" a sissy bar but much, much cooler.
For solo cruising, the passenger rest provides a slick look similar to our original Gunfighter saddle design. When you wish to carry passengers, just fold up the rear pad to reveal a generous passenger seating area complete with backrest. Of course the passenger seat and backrest pad are constructed with our exclusive Comfort Cell® foam to give excellent support and riding range. The rear of the saddle is finished off with your choice of gloss black ABS panels or Chromed steel. Panels are easily removed if you'd like to have them custom painted to match your scoot (order ABS for this).
The Rumble Seat is designed for excellent rider comfort up front and is also built up of our exclusive Comfort Cell® foam. The front seating area is ergonomically contoured to provide a larger area of body contact and excellent weight distribution. The fold down passenger rest adds extra seat height to give you additional back support and longer riding range. Passenger seating is generous and perfect for short to mid-range rides with the backrest in the flipped up position.
Notice how the saddle completely contains the entire bracket mechanism for a very clean look along that cool fender. Our saddles are carefully designed to fit perfectly to the tank, chassis and fender. This kind of fit is available only in genuine Corbin saddles.
For those chilly morning rides we offer an option of heated rider seating. We incorporate a heater unit under the leather seating and a switch on the left side of the saddle so you can turn it on without removing your hand from the throttle. Just flip the switch to the low or high position and the seat will warm up and maintain temperature automatically through a built in controller. A true bit of luxury! Corbin's heater comes completely preinstalled in the saddle and you need only integrate the included pigtail.
Saddle comes standard with our "sharp deco" stitch pattern as shown. Choose from a variety of leather styles to customize the look of the saddle.
Along the right side of the saddle you'll find the key lock mechanism for saddle installation. Once you've installed our brackets (and wiring for heated models), a simple twist of the key is all that's required for seat removal & installation.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
PATENTED RUMBLE SEAT: The most convenient saddle available! Converts instantly from Solo to Dual with no tools required, just a simple flip of the wrist. Another original Corbin idea, this seat design is so unique it carries two United States Patents: #4,953,911 & #6,971,714. Click the button for additional info
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
ELECTRIC HEAT: As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you're ready to roll. Click the button at left for complete info...
Measurements
Rider Seating: Approx. 12" wide x 16" long x 7" deep
Passenger: Approx. 7" wide x 10" long x 11" deep
Approx seat height: 26.5"
Measurements:
Rider Seating: Approx. 12" wide x 16" long x 7" deep
Passenger: Approx. 7" wide x 10" long x 11" deep
Approx seat height: 26.5"
Installation Instructions: Page 1 - Page 2 For simple installation, we've designed this model to work with our new key lock system. Simply install the included tank bracket and stainless steel latch pin. The seat will now install with a tongue in the front and a key latch in the rear for simple on and off.
Install the Corbin nose clip in place on your bike using the two bolts at the base of the tank. Install the latch pin into your fender and slide the nose of the saddle into place with the standard tongue into the chassis. Then lower the rear of the saddle into place and latch by pushing down on saddle. If you opt for the heated model, all wiring and needed adapters are included.
This model will not mount to your bike using the hinge mount system.
Rumble seat does not work with the Harley-Davidson sissy bar assembly.
Only the front seat position is heated on this model.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
With the Corbin EZ-Fill adding oil to your primary is simple. Remove the knurled plug from the inspection cover and pour. It looks great and works just as well (a hallmark of Corbin design). Available for: FX, FL Shovelheads, FLST Softails, FXDWG Dyna Wide-Glide, FXR Models, Roadking, Road-Glide and FLH / FLT models. *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-FXR-FLIP-E
Rumble Seat, Heated
$699
#HD-FXR-FLIP
Rumble Seat, no heat
$549
Seating Panels
Side Panels
Welts
Stitching
Flip Finishing Plates
Special Notes
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
