Stinger Saddle for 2006-2009 Harley-Davidson Dyna Wide-Glide
The Stinger saddle design keeps a low slammed look appropriate to the Dyna, yet provides plenty of comfort for you. Our high density Comfort Cell® foam provides resilient comfort and a low seating platform for a slim profile that looks awesome. Notice how the shape of the saddle follows the contours of your bike and molds along the crown and profile of the fender. Stinger's tail section is padded and upholstered so it can take passengers for a short distance, but this model is designed primarily as a solo saddle.
In the front, we've built a seating platform that is concave in shape to fit the contour of your body and provide more square inches of body contact. This gives you excellent comfort despite the low profile design. Sculpted with a narrow nose for good ground reach while providing support under your thighs while in the riding position... a standard of Corbin design. On top, we cover the saddle with genuine leather for a truly luxurious ride.
Inside, our exclusive Comfort Cell® foam gives you firm support that lasts all day because it doesn't crush down like the soft stock foam. Over time, Comfort Cell® will adapt to your body and provide a personalized fit. Under the foam, our rigid Fibertech basepan fits perfectly to your bike and provides a good foundation to keep the foam shape correct. Corbin basepans ride on rubber bumpers to protect your paint job from scratching. Installation is simple and works on a new key lock system designed by Corbin.
Choose from a wide range of leather styles for a truly custom touch. Get your saddle made in all natural black for a subdued approach or dress it up like we did here for a little more flair that doesn't overpower the bike. Shown above is our standard natural texture black leather in the seating panel with a Faux-Ostrich tail and black Asphalt vinyl side panels. This new asphalt material gives a nice accenting contrast that blends in with the chassis and engine black.
Leather seating is perfect for motorcycle saddles because it breathes with your body and will conform to the foam shape for a personalized fit after break in. Over time your saddle will age and develop a unique character just like your leather jacket. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years. Never use cleaners or conditioners that contain petroleum or kerosene as they will damage the hide and reduce its life span.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Rider Seating: Approx. 12" wide x 17" long
Measurements:
Rider Seating: Approx. 12" wide x 17" long
Installation Instructions: [Page 1]
Installation: Corbin's Stinger uses a new key lock system for installation. We include a bracket and stainless steel latch pin that integrates with a lock mechanism on the Corbin saddle.
Simply install the stainless steel pin into the stock seat screw location at the rear. Then install the included bracket (shown in yellow) on your bike as shown. The seat will now install by sliding the seat into position tail first and lowering the nose onto the Corbin bracket. Push down on the nose to latch the seat and you're ready to ride. Removal is simple with a twist of the key.
NOTE: To ease installation until the rubber bumper on the basepan break in, it may be necessary to add a washer between the Corbin bracket and latch pin. Once the bumpers relax a bit you can remove the washer.
Rider Comments:
I received my seat last week and was completely impressed with the quality and fit. I followed the installation instructions and the seat fit perfectly after some initial patience and attention. My bike is a factory CVO custom and I was worried that it might not look right; it couldn't look any better than it does now and the level of quality and comfort leaves me wondering why the heck I waited so long before I bought the Corbin!!
I was also impressed with the quick follow-up and shipping and everything went just as it was stated it would on your website.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
With the Corbin EZ-Fill adding oil to your primary is simple. Remove the knurled plug from the inspection cover and pour. It looks great and works just as well (a hallmark of Corbin design). Available for: FX, FL Shovelheads, FLST Softails, FXDWG Dyna Wide-Glide, FXR Models, Roadking, Road-Glide and FLH / FLT models. *More Info*
Makes seat installation and removal a tool-free snap! Machined billet thumbscrew is polished and chromed for a very clean look. Available in the following sizes:
SAE: 1/4" x 20 or 1/4" x 28
Metric: m5 x .8, m6 x 1.0 or m8 x 1.25
*More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Please select cover options from the drop down boxes before adding to cart. We will verify all selections with you before starting production. Have questions? Just click on the "Glossary" or "Materials" button for answers. NOTE: Drop down boxes do not default to descriptions shown on product above.
ITEM
DESCRIPTION
PRICE
#HD-DWG-6-STNG
Stinger Saddle, 2006-2009 Wide Glide
$439
Seating Panels
Side Panels
Welts
Tail Section
Stitching
Special Notes
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
All Corbin saddles (with very little exception) include 
