Hollywood Solo for 2008-2009 H-D FXDF Fat BobTM Dyna-Glide
Hollywood Solo saddle gives a slick, low profile while providing boulevard cruising comfort. Corbin's Fibertech basepan provides a perfect, flowing fit along the tank, chassis and fender, but rides on rubber bumpers to protect your paint. Hollywood Solo is built up with high density Comfort Cell® foam to provide a firm, resilient ride despite the incredibly low profile. It's seats like this one that brought Mike to the development of our exclusive infinite ratio foam!
Hollywood solo works with our optional passenger pillion pad to provide for copilot transportation. Pillion offers a low profile and a clean look that fits well with the design of the solo saddle. Constructed with high density Comfort Cell foam to provide firm support and long range comfort. Covered in genuine leather to match your Hollywood Solo.
A great setup if you want to have a low and slammed look. Notice how the shaping matches perfectly to the tank and fender... this kind of fit is available only in a Corbin saddle. Our rigid Fibertech basepan provides a good foundation for the foam shape and rides on rubber bumpers to protect your paint job. Corbin's exclusive Comfort Cell® foam is engineered with an ergonomic shape that provides a greater area of body contact for better weight distribution. Sculpted shaping in the nose area assures that you still have good ground reach at stop signs.
Hollywood Solo comes standard with genuine leather seating for a luxurious ride. Leather seating is perfect for motorcycle saddles because it breathes with your body and will break in with the foam shape for a personalized fit. Leather is extremely durable while giving you the ultimate in luxury. Over time your saddle will age and develop a unique character just like your leather jacket and chaps do. If you care for it properly with a quality conditioner like our Saddle Cream, your leather saddle will be your riding buddy for many years.
Saddle mounts with a new key lock system. We include all mounting hardware so it's ready to go right out of the box. Once the brackets are in place, you install the Hollywood Solo easily with a supplied key. Just slide the rear of the seat into place on the rear catch pin and lower it onto the included latch at the front. To remove the saddle, just insert the key and turn to release the lock and saddle is ready to remove... quick and simple!
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Installation: Install the stainless steel catch pin into the fender location shown. Look at the bottom of the saddle and note how the keyhole bracket will integrate with this pin to secure the rear of the seat.
Install the latch pin bracket as shown here. You will reuse the stock bolt on the right side and the supplied bolt on the left side. Now just slide the rear of the seat onto the catch pin and lower the nose onto the latch. Push down until you hear two clicks. Remove the seat by inserting key in the lock and turning clockwise.
Pillion pad will not work with the #56802-06 fender mounted Bobtail Fender Rack available as an accessory item from H-D.
Show your colors! We usually have a new tee shirt design available every year. For 2007, we are offering the Corbin tee with the official Hollister Rally logo on the Front and our pinstripe design on the back. Available in a variety of styles for men and women! *Show Me*
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Product Questions
If you have a specific question about this product, just drop us a line. We strive to answer all e-mail within one business day.
Post Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them HERE.
Install Issues?
Having trouble getting your new seat to mount? Check out our Installation Tips page here: Trouble Shooting
Need replacement brackets, hardware or instructions? Write to us here: Tech Support
Hollister Rally INFO
Thinking of making the trek to the Birthplace of the American Biker for the 60th anniversary? You should! Get the latest information on what's happening and where HERE.
Ordering a seat custom or wondering what that inventory model looks like? This is the place to look for all of the current leather and vinyl materials we offer.
Subscribe to the Corbin Times Home Edition. Our weekly newsletter will keep you up to date on new products, new applications, rallies and more. It's fun to read and members are automatically entered for monthly prizes!
Saddle comes standard with natural black leather seating as shown above. Various texture and color options are avaialble at no extra cost by special order. Just click on the "Glossary" or "Materials" button for more information.
ITEM
DESCRIPTION
PRICE
#HD-FXD-FB-8-H
Hollywood Solo, Fab Bob Dyna-Glide
$359
#HD-FXD-FB-8-TP
Passenger Pillion, Fat Bob Dyna-Glide
$239
Unless otherwise noted, saddles may be shown with optional items that are not included. See Accessories Tab for Corbin Backrests, V-Rails & other accessory items.
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
