Fleetliner Fairing for 2004 - 2012 Harley-Davidson Dyna-Glides
Traditional looks with improved aerodynamics. Our Fleetliner Fairing fits all Dyna-Glide models except Wide-Glide from 2006 to the present and bolts up easily to your stock front end. Fairing is available in primer gel coat ready for your painter's preparation or prepainted gloss black and ready for installation. Shown above on a Sportster model, the Dyna-Glide fairing looks exactly the same and offers the same features.
This stunning fairing looks great while giving excellent wind protection so you can go out and rack up mileage right alongside the Baggers. Subtle details like the center-rib make it beautiful to look at. Another example of form and function expertly combined in Corbin fashion.
We've taken a shape similar to the fairing designs you've seen on the big highway bikes before, but upgraded the design to provide better aerodynamics. Notice how the shape of the fairing starts at the headlight and flows back to part the wind more gracefully. This transfers the highest-pressure area rearward of the steering pin, which gives much greater stability at speed (a rudder effect). This shape also brings the slipstream "bubble" further back to get you out of the wind.
As the fairing is designed to slip through the wind, it creates less turbulence and buffeting which gives you a quieter and smoother ride than the standard plexi windshield. Naturally this stability and low pressure slipstream for the rider helps to relieve fatigue associated with long days on the highway. It also helps to lower wind noise adding to the comfort value.
Constructed of our Fibertech material for a smooth clean finish and durability. Fleetliner fairing is available in primer or hand painted gloss black so it's ready for immediate installation or to have customized at your local paint shop. Quite honestly, we recommend going with the prepainted one in ALL circumstances. The extra we charge to finish the fairing in black is less than what your painter will probably charge for the prep work.
Topped off with a smoked windscreen for a beautiful piece that is ready to install right out of the box. Speaking of the windscreen, our fairing will actually work with just about any windscreen or wind deflector designed for the 1997-2006 Harley-Davidson FLHTC. This will allow you to easily customize the performance to your stature. Your local Harley dealer can show you a selection of H-D and aftermarket models or just run with the cool dark-smoke model that we include. If you are a taller rider and prefer a little more wind protection, we also offer a 10" clear windscreen in place of the smaller smoked one, just select the appropriate windscreen in the space provided.
Simple to install with complete directions and all required brackets included. Suitable for the average weekend mechanic to install with no cutting, drilling or welding required. NOTE: See special notes tab for important model fitment information.
Fibertech Construction
Manufactured of our exclusive Fibertech™ material for durability and a clean finish. Specially formulated for Corbin, Fibertech™ gives us very tight tolerances with minimal shrinkage so each part comes out true to the original design.
Finish
We use a quality gel-coat for a nice finish that doesn't show material weave. When ordering parts in "primer gel-coat" you can expect a part ready for your painter's preparation. Most Corbin components are also available prepainted and ready for immediate installation.
Sorry, this fairing does NOT fit the Dyna Glide Low Rider.
The Corbin fairing was designed on a stock configuration motorcycle. If you plan on changing handlebars on your bike, this may impact functionality to some degree.
If you have a handlebar mounted radio or other device installed, it may effect fit of the Corbin fairing.
2008+ models: Check the pinch bolts on your top triple clamp and assure the bolts point straight OUT (90 degrees) when the handlebar is held straight. If the bolts angle back towards the tank, our brackets will not work on your bike. This is true on the 2008 Low Rider model.
Sure, you can order any of the windscreens we have premounted on your fairing, but if you've changed your mind and want to try a different one, you'll find them here. *Check 'em out...*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Fleetliner Fairing, 2008-2012 H-D Dyna-Glide, Primer
$1199
#HDFXD-8-XLFAIRB
Fleetliner Fairing, 2008-2012 H-D Dyna-Glide, Painted Black
$1399
#HDFXD-6-XLFAIR
Fleetliner Fairing, 2006 - 2007 H-D Dyna-Glide, Primer
$1199
#HDFXD-6-XLFAIRB
Fleetliner Fairing, 2006 - 2007 H-D Dyna-Glide, Painted Black
$1399
#HDFXD-4-XLFAIR
Fleetliner Fairing, 2004 - 2005 H-D Dyna-Glide, Primer
$1199
#HDFXD-4-XLFAIRB
Fleetliner Fairing, 2004 - 2005 H-D Dyna-Glide, Painted Black
$1399
We do not always have a color match for all brands and models, especially at the beginning of the year when the new models come out. Please enter your bike year and paint color below and we will contact you if we do not currently have the color matched. A note about paint color matching: Please Read
Model Year
Paint Color
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.
All Corbin saddles (with very little exception) include 
