The world famous Gunfighter design combines rider comfort and a fast look for your Bagger. Up front an ergonomically contoured saddle provides a large area of body contact for best weight dispersion. Our fastback tail section is padded and upholstered to provide for short trip passengers while providing the rider with additional lower back support.
Gunfighter design accepts our optional removable rider’s backrest in a variety of styles (Model #02-G shown). The special hardware in this setup allows for multiple adjustments to tailor it's fit perfectly to your posture. You can adjust the position fore & aft while also changing the backrest angle. It's even spring loaded so it will fold down to make it easier to mount your bike.
Corbin backrests install easily into hardware concealed in the saddle so there are no unsightly brackets to clutter up the look of your bike. We offer a variety of backrest styles to suit your taste and the amount of support you wish. Naturally, removing the backrest as desired is simple with just a single screw. There is no need to install or remove the saddle to do so.
All components feature genuine leather seating for a perch that breathes with your body and breaks in with the foam shape for a personalized fit. In the side panels and tail, we use a coordinating vinyl material to keep your foam shape tight and the saddle looking sharp longer. Leather makes an excellent cover for a motorcycle seat because it is extremely durable and luxurious to ride on. Just be sure to care for it properly with a quality leather conditioner like our Saddle Cream.
Available with the option of electric heated seating! Heated seating provides a real bit of luxury when the weather turns chilly. Just flip the switch located on the left side of the saddle (where you can reach it without letting go of the throttle) and the seating area will warm up and maintain temperature automatically. System is managed via controller built into the saddle... all you need to do is integrate the included pigtail with your Harley's fusebox and you'll be ready to hit the road. Complete instructions included.
Gunfighter saddle installs on your bike easily with our new key lock system. Once the included stainless steel hardware is installed on your bike, the saddle will mount and remove with a simple twist of the key. Again, all brackets and complete directions are included.
If you opt for the larger #02-S or #297S backrests, you also have the option of our integrated Glovebox. Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black. For complete info, click HERE.
UNIQUE TECHNOLOGY: The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.
COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn't break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort! For the complete story just click the button.
ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle's foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell... more comfort for a longer ride! Just click the button at left for an animation that shows how it works.
PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about, just click the button for More Info
FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. Click on the button at left to learn more...
GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste. For more information about leather seating just click away.
CORBIN BACKREST SYSTEM: The first and most versatile removable backrest system available for motorcycles! Corbin's backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider's profile for a tailored fit and install or remove easily as desired. A very popular option! Click the button for additional info...
KEY LOCK INSTALLATION: This saddle model uses a new mounting system designed by Corbin to allow installation and removable with a simple key lock. Once the included brackets are installed, the saddle can be removed easily by just inserting and turning the key. Need a demo? Just click the button.
Measurements
Rider Seating: 13.5" wide x 16.5" long Back support: 6" Approx. seat height: 27"
Measurements:
Rider Seating: 13.5" wide x 16.5" long Back support: 6" Approx. seat height: 27"
Installation: Gunfighter installs on your bike easily with all brackets and necessary components included. Install the single catch pin into your fender into the stock location and the double catch pin into the hole in the front seat tongue near the tank. Now just slide the keyhole bracket at the rear of the saddle onto the fender mounted pin and lower the nose onto the front pin and push down. The seat is now locked in place.
If you opt for the heated seat model, we also include an adapter pigtail that integrates with your HD Fusebox to supply power to the saddle. Heater unit and controller come preinstalled in the saddle.
The authorized biography of Mike Corbin, written by our friend William Carrington. Following the triumphs and trials of a lifetime developing new ideas from motorcycle seats to electric cars. An all American story! *Excerpts*
Our most popular backrest model is the perfect blend of form and function. The size looks visually appropriate on most every seat yet is large enough to provide good, sculpted support. Works well in either the rider's or passenger's position. The standard Ovalbac is available with a range of finishing plate options to dress up the rear including chrome! *More Info*
The standard Corbin backrest for years! This model is the same size and shape as the Standard Ovalbac above, but without the hole in the middle. Provides plenty of sculpted back support without looking too big on the bike. Works in both the rider or passenger seating area on virtually all Corbin saddle models. This model also has the option of chrome studs if desired. *More Info*
Like the Standard Ovalbac show above, but with a larger contact area for added support. Works great as a passenger backrest in Dual Touring models. Because of the added width, we do not recommend this model in the front position while carrying a passenger... it may interfere with their legs. Sculpted to provide wide ergonomic support. Offers a variety of finishing plate options to customize the rear (sorry, no chrome). *More Info*
This model is specially designed to be used in the large Dual Touring seats (like HD Baggers) or in Master's Type saddles as found on the Goldwings. Sculpted for extended support both vertically and horizontally, but cut away at the bottom to provide clearance for passenger's legs. A variety of finishing plate options are available to customize the rear. *More Info*
If you want the functionality of a backrest, but also want the smallest appearance possible, this is the backrest model for you. This one is most often used as a rider's backrest in Gunfighter seat models (thus the name). Includes a variety of finishing plate options for the rear. *More Info*
All the functionality of an adjustable backrest, combined with the smallest profile possible. This model is often used as a rider's backrest in Gunfighter seat models just like the #02-G shown above. Includes genuine leather seating and color coordinating options just like our saddles *More Info*
A convenient storage solution that looks great too. Corbin's Glove Box bolts up easily to your #02-S(B) model backrest in place of the rear finishing plate to provide four liters of locking storage. Available in primer or pre-painted. Some color matches are available depending on bike make and model. Comes fully lined too! *More Info*
Take good care of your new seat and the seat will take good care of you. Designed to help your leather saddle remain weather resistant and keeps the hide supple. This will allow the leather to break in and age gracefully. Great for boots, gloves & jackets too. Simple rub-in, buff out application. *More Info*
Testimonials:
Submit Your Comments
Of course we want to hear from you! Have some suggestions for us or maybe comments for other riders, send them via THIS FORM.
General Contacts
Hollister Factory:
2360 Technology Parkway Hollister, CA 95023 800-538-7035
Daytona Showroom:
1433 North US HWY 1 Ormond Beach, FL 32174 800-223-4332
Gunfighter saddle includes genuine leather seating in our natural leather texture. Coordinating vinyl sides and tail provide a clean, stealty look. Material and color options are available by special order, just check the "Glossary" and "Materials" buttons for additional information. See the Accessories tab above for backrest and other optional items.
ITEM
DESCRIPTION
PRICE
#HD-FLH-9-GUN
Gunfighter saddle no heat, 2009-2010 HD Touring bikes
$439
#HD-FLH-9-G-E
Gunfighter saddle with heat, 2009-2010 HD Touring bikes
$589
#02-SB
Ovalbac Leather Backrest (ea)
$229
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available.
All Corbin saddles (with very little exception) include Genuine Leather Seating to provide a luxurious look and feel.... don't let anybody tell you that vinyl is just as good! You wouldn't buy vinyl boots would you?
PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.
SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).
FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA.
If you prefer to choose a different backrest model than the #02-SB, just click on the Accessories Tab above. You will be shown all of the Corbin backrest models currently available. 
All Corbin saddles (with very little exception) include 
